X-Git-Url: http://git.rot13.org/?p=zc;a=blobdiff_plain;f=docs%2Ffactory-reset.txt;fp=docs%2Ffactory-reset.txt;h=fb3de960fd2d1d766f55a99c235decbb40e938af;hp=0000000000000000000000000000000000000000;hb=30f459b208bca6af7494ef275dd73dac039f4c8f;hpb=0ae9a56cf69115d6997a2ae4a44569a67eabf483

diff --git a/docs/factory-reset.txt b/docs/factory-reset.txt
new file mode 100644
index 0000000..fb3de96
--- /dev/null
+++ b/docs/factory-reset.txt
@@ -0,0 +1,33 @@
+To reset power to sernsor, disconnect battery for 40s to drain all capacitors
+(count from 20 to 60 to produce 40s timeout)
+
+Pressing S6 button can be done only when sensor is active (after plugging in battery
+for example)
+
+start server on mqtt.zc‐ssensor.com
+
+dpavlin@subvision:~/zc$ ./mqtt-zc-sensor.sh
+
+Prepare new mqtt server:
+
+./zc-send queue/864823042076992 mqtt
+./zc-send queue/864823042076992 interval 300
+
+factory reset will also reset interval to 86400 seconds
+
+
+
+
+4. Reset Factorry Default Settting
+
+When the product is working abnormally, user can use button S6 to reset the default
+parameters.
+
+Press and hold the buttton S6 for 3 seconds, you will see the sensor red and green lights (D3, D4 LED)
+flash synchronously at 4Hz frequency, then D3, D4 keep light on at the same time.
+
+Release the button S6 now and wait for about 3 seconds, the device will reboot and the parameters
+will be reestored to their default state.
+
+The senssor server IP with CTIOT protocol is restoreed to 117.60.157.137, 568 83.
+For sensor of MQTT prrotocol, the proxy server IP willl be restored to mqtt.zc‐ssensor.com, 1883.