1 #========================================================================
3 # ChangeLog - change log for BackupPC.
6 # Revision history for BackupPC, detailing significant changes between
7 # versions, most recent first.
10 # Craig Barratt <cbarratt@users.sourceforge.net>
12 #========================================================================
14 # Version __VERSION__, released __RELEASEDATE__.
16 # See http://backuppc.sourceforge.net.
18 #========================================================================
20 #------------------------------------------------------------------------
21 # Version __VERSION__, __RELEASEDATE__
22 #------------------------------------------------------------------------
24 * Several improvements to restore: cancel now reports the correct
25 message and cleans up correctly.
27 * Rsync with whitespace and wildcard excludes fixed by replacing
28 argList with argList+ in config.pl.
30 * Fixed typo in bin/BackupPC_restore (XferLOG -> RestoreLOG).
32 * (Re)-fixed "Bad command" in log file when restore via tar or zip
33 file download is done.
35 * Added untaint to exec in Lib.pm to avoid tainted errors.
37 * Applied additional tweak to hilight patch from Tim Demarest.
39 * $Conf{CgiAdminUsers} = '*' now allows privileged even with REMOTE_USER
42 * Don't display RsyncdPasswd when displaying config.pl files.
44 * Replace pipe with socketpair in bin/BackupPC_dump and bin/BackupPC_restore,
45 which increases typical buffering from 4K to 16K-64K. This improves the
48 * Add check on $ENV{LANG} setting do configure.pl: if LANG includes utf
49 then a warning is printed.
51 #------------------------------------------------------------------------
52 # Version 2.0.0beta2, 11 May 2003
53 #------------------------------------------------------------------------
55 * Added German translation, provided by Manfred Herrmann.
57 * Fixed large-file problem with rsync, reported by Manfred Herrmann.
59 * Fixed zip and tar file download from CGI under mod_perl. Reported
60 by Pierre Bourgin and Paul Lukins.
62 * Fixed directory browsing and top-level directory browsing in 2.0.0beta0.
63 Reported by several users.
65 * Added -v option to BackupPC_dump for verbose output (useful when
66 you run the command manually). Added messages for all exits.
68 * If nmblookup returns multiple IP addresses, NetBiosHostIPFind()
69 now returns the first IP address that matches the subnet mask.
70 Suggested by Tim Demarest.
72 * Fixed BackupPC::View so the top-level directory is handled correctly.
73 This allows the top-level share/directory to be restored via the
74 CGI interface. Reported by several users.
76 * Fixed RsyncFileIO failures on certain large files by replacing seek()
77 with sysseek(). Reported by Manfred Herrmann.
79 * Added configurable highlighting of PC status in the CGI summary
80 screen; submitted by Tim Demarest.
82 * Fixed command queue CGI display; submitted by Tim Demarest.
84 * BackupPC_trashClean now logs an error if it can't remove all the
85 trash and then goes back to sleep, rather than continually trying.
87 * Moved correct user (uid) check into BackupPC::Lib so that all
88 applications do a user check if $Cong{BackupPCUserVerify} is
89 set. The avoids the risk of manually running BackupPC_dump as
92 * Loss of blackout now applies to "host not found" as well as no ping.
93 Reported by Dale Renton.
95 * "Host not found" is now treated in a similar manner to "no ping".
97 * Added suse-linux init.d script from Leon Letto.
99 * Added Gentoo linux init.d script from Tim Demarest.
101 * Applied additional i18n strings from GFK and the translation team.
103 * Fixed option parsing so that getopts errors are reported and we exit.
105 * Changed reporting of Xfer PIDs so that rsync cancel works correctly.
107 #------------------------------------------------------------------------
108 # Version 2.0.0beta1, 30 Mar 2003
109 #------------------------------------------------------------------------
111 * Added Spanish translation es.pm from Javier Gonzalez.
113 * Fixed CGI browse navigation bug that causes BackupPC_Admin to wedge
114 when directories were selected in a certain order.
116 * Fixed BackupPC::PoolWrite so that it can recover when the initial
117 file size is wrong. This is needed since rsync could write a file
118 whose size is different from the initial size returned in the
119 file list when that file is updated while rsync is running.
121 * Added binmode(STDIN) to BackupPC_tarExtract, suggested by Pat LoPresti
122 to fix a problem a RedHat8 with perl 5.8.0. It's unclear why this
123 helps, but it should be benign. See:
124 http://sourceforge.net/mailarchive/forum.php?thread_id=1853018&forum_id=503
126 #------------------------------------------------------------------------
127 # Version 2.0.0beta0, 23 Feb 2003
128 #------------------------------------------------------------------------
130 * Support for rsync and rsyncd backup and restore. Changes to
131 BackupPC_dump, BackupPC_restore, and new modules BackupPC::Xfer::Rsync
132 and BackupPC::Xfer::RsyncFileIO.
134 * Added internationalization (i18n) code from Xavier Nicollet,
135 with additions from Guillaume Filion. Voila! BackupPC_Admin
136 now supports English and French, and adding more languages is
137 now easy. New config paramater $Conf{Language} sets the language.
139 * Added optional user-defined pre/post dump/restore commands, allowing
140 things like database shutdown/startup for dumps.
142 * Changed the way hosts are found.
144 * Added $Conf{ClientNameAlias}, which allows the name of the physical
145 client machine to be set. This allows several different backup
146 "hosts" to all refer to the same physical machine, which is
147 convenient if several different types of data need to be backed
148 up, or if different parameters are needed for different parts of
151 * Replaced $Conf{PingArgs} with $Conf{PingCmd}, added $Conf{DfCmd},
152 $Conf{NmbLookupCmd} allowing all these commands to be fully
153 configured. Also, all commands can also now be fragments of
156 * Moved all smbclient commands into the config.pl file so the specific
157 arguments can be customized. New config parameters are
158 $Conf{SmbClientFullCmd}, $Conf{SmbClientIncrCmd} and
159 $Conf{SmbClientRestoreCmd}.
161 * Added new BackupPC::View module that creates views of backups
162 (handling merging etc). Updated BackupPC_Admin, BackupPC_zipCreate
163 and BackupPC_tarCreate to use BackupPC::View. This removes lots
164 of merging and mangling code from the higher-level code.
166 * Added code from Toby Johnson that allows additional users to be
167 specified in the hosts file; these users can also view/start/stop
168 and restore backups for that host. Also added a new config
169 setting $Conf{CgiNavBarAdminAllHosts} that allows all hosts to
170 be listed in the left nav bar for admins.
172 * Added $Conf{HardLinkMax} (default 31999) which sets the limit on
173 the maximum number of hardlinks per file in the pool. If a file
174 ever gets to this number of links a new pool file is created to
175 handle additional links.
177 * Added $Conf{PerlModuleLoad}, which allows optional additional perl
178 modules to be loaded.
180 * Added $Conf{EMailUserDestDomain} and other EMail config settings to
181 allow language-specific default messages to be overridden.
183 * Added BPC_FTYPE_DELETED to lib/BackupPC/Attrib.pm, allowing deleted
184 files to be represented in the attrib file correctly.
186 * Added support for environment variable BPC_SMB_PASSWD, which is the
187 client's smb password. This overrides the old environment variable
190 * Added taint cleanup for perl5.8 to lib/BackupPC/Lib.pm.
192 * Changed $tar_unpack_header format in BackupPC_tarExtract to correctly
193 handle files with trailing spaces.
195 * Added catching of SIG_PIPE to BackupPC_dump, and changed catch_signal
196 to ignore multiple signals of the same type.
198 * Added reporting of the largest number of hardlinks in the pool to the
201 * Adding reporting of syntax errors in the per-PC config.pl file.
203 * Updated BackupPC_sendEmail to handle language-specific email messages.
205 * Allow client (host) names to contain spaces. Spaces in host names
206 need to be escaped via "\" in the hosts file. The user of spaces in
207 host names is discouraged, but they should work. One feature that
208 doesn't work with host names that contain spaces is the highlighting
209 of that name in the log file display in the CGI interface. There are
210 no plans to fix this.
212 * Renamed $Conf{SmbClientTimeout} to $Conf{ClientTimeout}.
214 * Fixed all open() calls to use 3 argument form to fix handling of file
215 names with trailing whitespace. Also fixed CGI interface so these
216 file names are displayed correctly.
218 * Fixed new 2.0.0 CGI navigation bug that causes the top-level directory
219 to have a URL "&share=//boot&dir=" instead of "&share=/boot&dir=/".
220 Reported by Pascal Schelcher. Fixed similar problem reported by
223 * Added "PerlTaintCheck On" to the mod_perl section in the docs,
224 suggested by Tim Demarest.
226 #------------------------------------------------------------------------
227 # Version 1.5.0, 2 Aug 2002
228 #------------------------------------------------------------------------
230 * Changed conf/config.pl so that $Conf{TarIncrArgs} uses the --newer
231 option instead of --newer-mtime. Also removed --atime-preserve from
232 $Conf{TarClientCmd}. This makes the default settings work better
235 * Fixed configure.pl so it correctly detects a running BackupPC <= v1.4.0
236 so it can correctly warn the user to stop it before upgrading. Reported
239 * Added missing ";" to entity escape in EscapeHTML in BackupPC_Admin.
240 Reported by Guillaume Filion.
242 * Added LDAP setup to documentation from David Holland.
244 * Tar.pm now adds a "." to file paths that start with "/", so that all
245 tar paths are relative. From Ludovic Drolez.
247 #------------------------------------------------------------------------
248 # Version 1.5.0beta0, 30 Jun 2002
249 #------------------------------------------------------------------------
251 * A full set of restore options is now supported, including direct
252 restore via smbclient or tar or downloading a zip or tar file.
254 * Major additions to CGI script to support better directory navigation,
255 restore features and mod_perl. Also, file downloads from the CGI
256 interface now correctly preserve the file name and provide the
257 correct Content-Type for the most common types of files. Improved
258 directory navigation was contributed by Ryan Kucera.
260 * New script BackupPC_zipCreate (contributed by Guillaume Filion) is the
261 zip analog of BackupPC_tarCreate. BackupPC_zipCreate can be used to
262 create a zip archive of any portion of a backup.
264 * Substantial additions to BackupPC_tarCreate to support restore,
265 including modifying path names, handling hardlinks, fixing
266 support of old backups without attributes (pre-v1.4.0). Plus
267 BackupPC_tarCreate is now an offical part of the release.
268 (Lack of support for hardlinks was reported by John Stanley.)
270 * BackupPC_tarExtract now supports hardlinks and fixed pooling of
273 * A unix domain socket is now used for communication between the CGI
274 interface and BackupPC. The original TCP socket is optional. Sockets
275 are correctly re-initialized if config.pl is updated with new socket
278 * For improved security messages over the unix or TCP socket are protected
279 via an MD5 digest based on a shared secret, a sequence number, a time
280 stamp and a unique per-connection number.
282 * Additions to configure.pl to support install of directory navigation
285 * Fixed case where $Conf{BackupFilesOnly} or $Conf{BackupFilesExclude}
286 were set to a single string or list (in v1.4.0 only the case of
287 hash worked correctly). Reported by Phillip Bertolus.
289 * Fixed case of $Conf{BackoutGoodCnt} == 0. This setting now makes the
290 client always subject to blackout, matching the comments in config.pl.
291 Also fixed handling of $Conf{BackoutGoodCnt} < 0 in the CGI script
292 reported by Pascal Schelcher.
294 * Fixed byte and file totals for tar backups, reported by several users.
296 * Fixed --newer-mtime date/timestamp format to make it ISO 8601 compliant,
297 suggested by Erminio Baranzini.
299 * Fixed handling of $Conf{BackupFilesOnly} in BackupPC::Xfer::Tar.pm, as
300 well as shell escaping of tar arguments.
302 * Fixed entity encoding of 8-bit characters in the CGI interface.
304 * Added optional CGI headers in $Conf{CgiHeaders} that by default
305 is set to a no-cache pragma. Suggested by Benno Zuure.
307 #------------------------------------------------------------------------
308 # Version 1.4.0, 16 Mar 2002
309 #------------------------------------------------------------------------
311 * BackupPC now supports tar (in addition to smb) for extracting host
312 data. This is the most convenient option for linux/unix hosts.
313 Tar can be configured to run over ssh, rsh or to backup a local
314 nfs mount from the host.
316 * Support for special files, including symbolic links, fifo, character
317 and block device files has been added, so that all native linux/unix
318 file types can be correctly backed up when using tar transport.
319 Special files are all stored as regular files and the type attributes
320 are used to remember the original file type.
322 * All unix file attributes are now saved (and pooled when possible).
323 This includes user and group ownership, permissions, and modification
324 time. Smbclient also does a reasonable job of emulating unix
325 permissions (such as mtime), and these attributes get saved too.
327 * The new default is to not fill incremental dumps. configure.pl
328 automatically sets $Conf{IncrFill} to 0. The default was 1
329 (incrementals were filled with hardlinks). Since the CGI
330 script does filling at browsing time, there is no need to
331 fill incremental dumps.
333 * Backup file names are now stored in "mangled" form. Each node of a
334 path is preceded by "f", and special characters (\n, \r, % and /) are
335 URI-encoded as "%xx", where xx is the ascii character's hex value. So
336 c:/craig/example.txt is now stored as fc/fcraig/fexample.txt. This
337 was done mainly so meta-data could be stored alongside the backup
338 files without name collisions. In particular, the attributes for the
339 files in a directory are stored in a file called "attrib", and
340 mangling avoids file name collisions (I discarded the idea of having
341 a duplicate directory tree for every backup just to store the
342 attributes). Other meta-data (eg: rsync checksums) could be stored in
343 file names preceded by, eg, "c". There are two other benefits to
344 mangling: the share name might contain "/" (eg: "/home/craig" for tar
345 transport), and I wanted that represented as a single level in the
346 storage tree. Secondly, as files are written to NewFileList for later
347 processing by BackupPC_link, embedded newlines in the file's path
348 will cause problems which are avoided by mangling.
350 The CGI script undoes the mangling, so it is invisibe to the user.
351 Of course, old (unmangled) backups are still supported by the CGI
354 * Various changes to the CGI interface, BackupPC_Admin:
356 + Added button that allows users to manually start a full dump in
357 addition to the existing incremental dump.
359 + Added display of file attributes when browsing backups.
361 + Added an optional holdoff time specified by the user when canceling
362 a backup. BackupPC will not attempt any new backups for at least the
363 specified time. This holdoff time can be changed whether or not a
366 + Added supports for file mangling, and correct merging of unfilled
367 backups from mangled or unmangled (and compressed or uncompressed)
368 fulls when browsing or restoring.
370 + Only displays a "Start Incr Backup" button if there are already some
373 + For DHCP hosts, when a user tries to manually start a backup, add
374 a check for the netbios name of both the host the request came
375 from (REMOTE_ADDR) and the last known DHCP address for that host
376 to see if either address matches the host. If not, an error
377 message is display. The previous behavior was that only requests
378 from the client itself succeeded, and requests from other machines
381 * Changed the version numbering to X.Y.Z, instead of X.0Y. This release
382 is 1.4.0. The first digit is for major new releases, the middle digit
383 is for significant feature releases and improvements, and the last
384 digit is for bug fixes. You should think of the old 1.00, 1.01, 1.02
385 and 1.03 as 1.0.0, ..., 1.3.0.
387 * BackupPC and the CGI script BackupPC_Admin now check that the effective
388 user id is correct to avoid accidentally launching BackupPC as the
389 wrong user or detecting CGI configuration problems. This behavior
390 can be turned off using the $Conf{BackupPCUserVerify} option.
392 * In numerous places changed "Smb" to "Xfer" (eg: log file names) to
393 support generic names for both smb and tar transport methods. The
394 CGI script checks for old names for backward compatibility.
396 * Major changed to Backup_dump to support new tar transport. All transport
397 specific code moved into BackupPC::Xfer::Smb and BackupPC::Xfer::Tar
400 * Added workaround for a bug in Samba's smbclient for files between 2GB
401 and 4GB. The file size in the tar header is incorrect. This allows
402 files up to 4GB to work with smbclient, rather than 2GB. To support
403 files larger than 2GB you must make sure perl is compiled with the
404 uselargefiles option (use "perl -V | egrep largefiles" to check) and
405 the pool directory must be on a file system that supports large files.
407 * Moved the pool writing code into a module BackupPC::PoolWrite. This
408 allows the clever file pool checking (digest, uncompressing, comparing
409 etc with minimum disk IO) to be used easily in multiple places (eg: it
410 is now used for writing attribute files so they can be pooled).
412 * Changed MD5 to Digest::MD5 to avoid use of the depreceated MD5 module.
414 * Shortened default $Conf{MyPath} so that perl's taint mode is more likely
415 to be happy. The old $Conf{MyPath} contained /usr/local/bin, which
416 on one user's machine was world writable and perl -T correctly
419 * Fixed ping command options in Lib.pm so that it works on OpenBSD.
420 Thanks to Kyle Amon for sending the fix. Decided to move the
421 ping options from Lib.pm into config.pl (as $Conf{PingArgs}) and
422 now configure.pl tries to come up with a sensible default based on
425 * Fixed argument checking in BackupPC_tarExtract to allow '$' in the
426 share name (eg: C$). Thanks to Jules Agee for this fix. Also
427 changed the default config.pl so that single quotes are used
428 everywhere so that people don't get tripped up putting '$' inside
429 double-quoted strings.
431 #------------------------------------------------------------------------
432 # Version 1.03, 9 Dec 2001
433 #------------------------------------------------------------------------
435 * BackupPC now has full support for compression. There are now two
436 pool areas, the original pool for uncompressed files, and cpool for
437 compressed files. The compression is done by Compress::Zlib.
438 Compression reduces the pool disk usage by around 40%, although your
439 mileage may vary. Compression is optional and can also be specified on
440 a per-PC basis (although this will cost more pool storage since many
441 backup files will have to be stored in both compressed and
444 * A new script, BackupPC_compressPool, can be run to compress the entire
445 pool. This is used once to migrate all the pool data from uncompressed
446 to compressed on existing installations. Read the documentation
447 (Installing BackupPC/Compressing an existing pool) before running
448 BackupPC_compressPool!
450 Alternatively, compression can simply be turned on and all new backups
451 will be compressed. Both old (uncompressed) and new (compressed)
452 backups can be browsed and viewed. Eventually, the old backups will
453 expire and all the pool data will be compressed. However, until the
454 old backups expire, this approach could require 60% or more additional
455 pool storage space to store both uncompressed and compressed versions
458 * Significant improvements to the cgi interface, BackupPC_Admin:
460 - much better layout navigation
461 - handles compressed backup files and compressed log files
462 - handles unfilled incremental dumps
463 - better backup directory browsing navigation
464 - reports compression statistics
465 - $Conf{CgiDateFormatMMDD} allows you to set date format (MM/DD or DD/MM)
466 - Additional customization with $Conf{CgiHeaderFontType},
467 $Conf{CgiHeaderFontSize}, $Conf{CgiNavBarBgColor}, and
468 $Conf{CgiHeaderBgColor}.
470 * Eliminated BackupPC_queueAll. BackupPC directly reads the hosts
471 file and queues the PCs itself. Like config.pl, BackupPC will
472 re-read the hosts file on each wakeup if its modification time
473 changes, or upon a SIGHUP. This also makes for better behavior
474 when adding a host: if you add hosts, simply send a SIGHUP to
475 BackupPC or wait for the next wakeup.
477 * BackupPC_dump now compresses the SmbLOG file if compression is enabled.
479 * BackupPC_dump keeps track of compressed file sizes so that compression
480 statistics can be reported by the cgi interface.
482 * Aging of old log files now handles compressed log files (.z extension).
484 * Added configuration option $Conf{IncrFill} to specify whether
485 incremental dumps should be filled in. Old behavior was that
486 filling was on. Now it's optional. See config.pl for more
489 * BackupPC_nightly now cleans and generates statistics for both
490 the uncompressed pool and compressed pool (cpool).
492 * Added new utility script BackupPC_zcat that can be used to
493 uncompresses BackupPC files.
495 * configure.pl offers various options related to compression,
496 depending upon whether this is a new install or upgrade,
497 and whether or not Compress::Zlib is installed.
499 * configure.pl now makes a backup copy of config.pl before
500 config.pl is updated.
502 * added three new fields to the backups file to handle optional
503 filling and compression stats.
505 * Added -e option to BackupPC_dump. BackupPC now invokes BackupPC_dump -e
506 on each dhcp host once each night to verify that very old backups are
507 expired. This ensures that very old backups are expired even if
508 the dhcp host has not been on the network for a long time.
510 * fixed bug in BackupPC::FileZIO.pm that required Compress::Zlib,
511 even if compression was off. Thanks to Steve Holmes for reporting
514 * fixed bug that caused a BackupPC queue to get blocked when a backup
515 cancel attempt was made during the BackupPC_link phase.
517 #------------------------------------------------------------------------
518 # Version 1.02, 28 Oct 2001.
519 #------------------------------------------------------------------------
521 * Added new script BackupPC_tarExtract to extract the smbclient tar
522 archive. This reduces disk writes by perhaps 90-95% and disk reads by
523 50%. Previously, tar was used to extract and write everything to disk.
524 Then BackupPC_dump would read enough of each file to compute the MD5
525 digest, and then compare the full file with candidate pool files. So
526 for each 1MB file that matches a single file in the pool, there would
527 be 1MB of disk writes and 2MB of disk reads (to compare two 1MB files).
529 BackupPC_tarExtract instead extracts the archive using a 1MB memory
530 buffer. This allows the MD5 digest to be computed without touching the
531 disk. Next, any potential pool file compares are done by comparing the
532 pool file against the incoming tar data in memory, which only requires
533 the pool file to be read. So for each 1MB file that matches a single
534 file in the pool, there are now no disk writes, and only 1MB of reads.
535 BackupPC_tarExtract handles arbitrary size files and repeated
536 potential pool matches. If the incoming file doesn't match the pool
537 then it is written to disk (once the pool is mature this happens maybe
540 * Substantial changes to BackupPC_dump:
542 + BackupPC_tarExtract is now used in place of tar.
544 + BackupPC_dump now reads the output from both smbclient and
545 BackupPC_tarExtract and merges them into SmbLOG.
547 + Named pipes are no longer used to connect smbclient to tar
548 (now BackupPC_tarExtract). Regular pipes are used instead.
549 This avoids the need to system mknod or mkfifo.
551 + Locked files on the client that can't be read by smbclient
552 previously were filled with 0x0 bytes by smbclient, meaning
553 tar extracted a useless file filled with 0x0 bytes. Now,
554 BackupPC_dump watches the output of smbclient and removes
555 any files that smbclient couldn't read. This avoids storing
556 useless files. It tries to replace such files with a hard link
557 to a previous dump. These actions appear in the log file.
559 * added new module lib/BackupPC/FileZIO.pm. This handles pool file
560 I/O and is used by BackupPC_tarExtract. BackupPC::FileIO supports
561 reading and writing compressed and regular files and provides all the
562 hooks for compression support in BackupPC (should be supported in next
563 version). BackupPC::FileIO also does efficient writing of files that
564 contain leading 0x0 bytes (by seeking past the 0x0 bytes). This is
565 helpful when smbclient reads a locked file, and it fills the tar
566 output with a file of the correct size but all 0x0. Such files will be
567 later removed by BackupPC_dump. But in the meantime, BackupPC::FileIO
568 writes such files efficiently (as sparse files), meaning just a few
569 blocks of disk space will be needed even if the file is large.
571 * alive/dead counting for blackout now works correctly for DHCP hosts.
573 * BackupPC resets activeJob on startup, to fix bug when BackupPC was
574 killed and restarted with backups running.
576 * added extra non blocking select() in BackupPC to make sure the socket
579 * BackupPC avoids queuing multiple BackupPC_queueAll's on the CmdQueue.
581 * Updated BackupPC_sendEmail to correctly parse the locked file
582 error from 2.2.1a smbclient, so that missing Outlook file emails
583 can be correctly sent.
585 * Changed HostInfoRead() in lib/BackupPC/Lib.pm to lowercase the
586 hostname read from the hosts file.
588 * BackupPC_Admin provides general summary when the host name is empty.
590 * configure.pl (and BackupPC) now requires perl 5.6.0 or later.
592 * configure.pl complains if BackupPC is already running, reminding you
593 to stop it before upgrading.
595 * updated documentation, and fixed auto-insertion of config.pl into
596 BackupPC.pod (previously the last config parameter was left out of
599 #------------------------------------------------------------------------
600 # Version 1.01, 30 Sep 2001
601 #------------------------------------------------------------------------
603 * Documentation cleanup in README, doc/BackupPC.pod, conf/config.pl.
605 * BackupPC_sendMail now reads the optional per-PC config file, allowing
606 email configuration parameters to be set on a per-PC basis.
608 * Removed the unused 4096-length MD5 digest code in lib/BackupPC/Lib.pm.
610 #------------------------------------------------------------------------
611 # Version 1.00, 21 Sep 2001
612 #------------------------------------------------------------------------
614 * Initial release of BackupPC on sourceforge.net.