2 # GoodFET Client Library
4 # (C) 2009 Travis Goodspeed <travis at radiantmachines.com>
6 # This code is being rewritten and refactored. You've been warned!
8 import sys, time, string, cStringIO, struct, glob, serial, os;
12 """GoodFET Client Library"""
16 def __init__(self, *args, **kargs):
20 def serInit(self, port=None):
21 """Open the serial port"""
23 if port is None and os.environ.get("GOODFET")!=None:
24 glob_list = glob.glob(os.environ.get("GOODFET"));
25 if len(glob_list) > 0:
28 glob_list = glob.glob("/dev/tty.usbserial*");
29 if len(glob_list) > 0:
32 glob_list = glob.glob("/dev/ttyUSB*");
33 if len(glob_list) > 0:
36 self.serialport = serial.Serial(
40 parity = serial.PARITY_NONE
43 #This might cause problems, but it makes failure graceful.
44 #self.serialport._timeout = 5;
46 #Explicitly set RTS and DTR to halt board.
47 self.serialport.setRTS(1);
48 self.serialport.setDTR(1);
49 #Drop DTR, which is !RST, low to begin the app.
50 self.serialport.setDTR(0);
51 self.serialport.flushInput()
52 self.serialport.flushOutput()
54 #Read and handle the initial command.
56 self.readcmd(); #Read the first command.
58 print "Verb %02x is wrong. Incorrect firmware?" % self.verb;
60 def getbuffer(self,size=0x1c00):
61 writecmd(0,0xC2,[size&0xFF,(size>>16)&0xFF]);
62 print "Got %02x%02x buffer size." % (self.data[1],self.data[0]);
63 def writecmd(self, app, verb, count=0, data=[]):
64 """Write a command and some data to the GoodFET."""
65 self.serialport.write(chr(app));
66 self.serialport.write(chr(verb));
69 # count=len(data); #Initial count ignored.
71 #print "TX %02x %02x %04x" % (app,verb,count);
73 #little endian 16-bit length
74 self.serialport.write(chr(count&0xFF));
75 self.serialport.write(chr(count>>8));
77 #print "count=%02x, len(data)=%04x" % (count,len(data));
80 if(isinstance(data,list)):
81 for i in range(0,count):
82 #print "Converting %02x at %i" % (data[i],i)
86 self.serialport.write(outstr);
97 """Read a reply from the GoodFET."""
100 self.app=ord(self.serialport.read(1));
101 #print "APP=%2x" % self.app;
102 self.verb=ord(self.serialport.read(1));
103 #print "VERB=%02x" % self.verb;
105 ord(self.serialport.read(1))
106 +(ord(self.serialport.read(1))<<8)
109 #Debugging string; print, but wait.
110 if self.app==0xFF and self.verb==0xFF:
111 print "# DEBUG %s" % self.serialport.read(self.count);
113 self.data=self.serialport.read(self.count);
116 def glitchAPP(self,app):
117 """Glitch into a device by its application."""
118 self.data=[app&0xff];
119 self.writecmd(self.GLITCHAPP,0x80,1,self.data);
120 #return ord(self.data[0]);
121 def glitchVERB(self,app,verb, data):
122 """Glitch during a transaction.."""
123 self.data=[app&0xff, verb&0xFF]+data;
124 self.writecmd(self.GLITCHAPP,0x81,len(self.data),self.data);
125 #return ord(self.data[0]);
126 def glitchVoltages(self,low=0x0880, high=0x0fff):
127 """Set glitching voltages. (0x0fff is max.)"""
128 self.data=[low&0xff, (low>>8)&0xff,
129 high&0xff, (high>>8)&0xff];
130 self.writecmd(self.GLITCHAPP,0x90,4,self.data);
131 #return ord(self.data[0]);
132 def glitchRate(self,count=0x0800):
133 """Set glitching count period."""
134 self.data=[count&0xff, (count>>8)&0xff];
135 self.writecmd(self.GLITCHAPP,0x91,2,
137 #return ord(self.data[0]);
141 def silent(self,s=0):
142 """Transmissions halted when 1."""
144 print "besilent is %i" % self.besilent;
145 self.writecmd(0,0xB0,1,[s]);
148 """Write a byte to P5OUT."""
149 self.writecmd(0,0xA1,1,[byte]);
151 """Write a byte to P5DIR."""
152 self.writecmd(0,0xA0,1,[byte]);
154 """Call to an address."""
155 self.writecmd(0,0x30,2,
156 [adr&0xFF,(adr>>8)&0xFF]);
157 def execute(self,code):
158 """Execute supplied code."""
159 self.writecmd(0,0x31,2,#len(code),
161 def peekbyte(self,address):
162 """Read a byte of memory from the monitor."""
163 self.data=[address&0xff,address>>8];
164 self.writecmd(0,0x02,2,self.data);
166 return ord(self.data[0]);
167 def peekword(self,address):
168 """Read a word of memory from the monitor."""
169 return self.peekbyte(address)+(self.peekbyte(address+1)<<8);
170 def pokebyte(self,address,value):
171 """Set a byte of memory by the monitor."""
172 self.data=[address&0xff,address>>8,value];
173 self.writecmd(0,0x03,3,self.data);
174 return ord(self.data[0]);
175 def dumpmem(self,begin,end):
178 print "%04x %04x" % (i, self.peekword(i));
180 def monitor_ram_pattern(self):
181 """Overwrite all of RAM with 0xBEEF."""
182 self.writecmd(0,0x90,0,self.data);
184 def monitor_ram_depth(self):
185 """Determine how many bytes of RAM are unused by looking for 0xBEEF.."""
186 self.writecmd(0,0x91,0,self.data);
187 return ord(self.data[0])+(ord(self.data[1])<<8);
196 def setBaud(self,baud):
197 """Change the baud rate. TODO fix this."""
198 rates=self.baudrates;
200 print "Changing FET baud."
201 self.serialport.write(chr(0x00));
202 self.serialport.write(chr(0x80));
203 self.serialport.write(chr(1));
204 self.serialport.write(chr(baud));
206 print "Changed host baud."
207 self.serialport.setBaudrate(rates[baud]);
209 self.serialport.flushInput()
210 self.serialport.flushOutput()
212 print "Baud is now %i." % rates[baud];
215 return ord(self.serialport.read(1));
217 for r in self.baudrates:
218 print "\nTrying %i" % r;
219 self.serialport.setBaudrate(r);
221 self.serialport.flushInput()
222 self.serialport.flushOutput()
224 for i in range(1,10):
227 print "Read %02x %02x %02x %02x" % (
228 self.readbyte(),self.readbyte(),self.readbyte(),self.readbyte());
229 def monitortest(self):
230 """Self-test several functions through the monitor."""
231 print "Performing monitor self-test.";
233 if self.peekword(0x0c00)!=0x0c04 and self.peekword(0x0c00)!=0x0c06:
234 print "ERROR Fetched wrong value from 0x0c04.";
235 self.pokebyte(0x0021,0); #Drop LED
236 if self.peekbyte(0x0021)!=0:
237 print "ERROR, P1OUT not cleared.";
238 self.pokebyte(0x0021,1); #Light LED
240 print "Self-test complete.";
245 """Move the FET into the I2C application."""
246 self.writecmd(0x02,0x10,0,self.data); #SPI/SETUP
248 """Start an I2C transaction."""
249 self.writecmd(0x02,0x20,0,self.data); #SPI/SETUP
251 """Stop an I2C transaction."""
252 self.writecmd(0x02,0x21,0,self.data); #SPI/SETUP
253 def I2Cread(self,len=1):
254 """Read len bytes by I2C."""
255 self.writecmd(0x02,0x00,1,[len]); #SPI/SETUP
257 def I2Cwrite(self,bytes):
258 """Write bytes by I2C."""
259 self.writecmd(0x02,0x01,len(bytes),bytes); #SPI/SETUP
260 return ord(self.data[0]);