1 ##################################
2 ## These are production boards.
3 ##################################
5 #Unset by default, but can be explicitly set later.
8 ifneq (,$(findstring $(board),goodfet20 goodfet10 goodfet11))
13 ifneq (,$(findstring $(board),goodfet21))
18 ifneq (,$(findstring $(board),goodfet30 goodfet31))
21 # This will link to fit in a '2254, so unneeded packages should be omited.
26 ifneq (,$(findstring $(board),goodfet40 goodfet41))
32 ifneq (,$(findstring $(board),stm32f4discovery))
34 periph ?= /opt/STM32F4xx_StdPeriph_Driver
35 discovery ?= /opt/STM32F4-Discovery_FW_V1.1.0
37 usbcore ?= $(discovery)/Libraries/STM32_USB_Device_Library/Core
38 usbsrc ?= $(usbcore)/src
39 otginc ?= /opt/STM32F4-Discovery_FW_V1.1.0/Libraries/STM32_USB_OTG_Driver/inc
40 otgsrc ?= /opt/STM32F4-Discovery_FW_V1.1.0/Libraries/STM32_USB_OTG_Driver/src
42 pincs ?= -I$(periph)/inc -I$(usbcore)/inc -I$(otginc) -I$(discovery)/Libraries/CMSIS/ST/STM32F4xx/Include -I$(discovery)/Libraries/CMSIS/Include -Dassert_param\(x\)= -DUSE_USB_OTG_FS -I/opt/STM32F4-Discovery_FW_V1.1.0/Utilities/STM32F4-Discovery
43 psrc ?= /opt/STM32F4xx_StdPeriph_Driver/src
46 GCC = arm-none-eabi-gcc
47 CC = arm-none-eabi-gcc
48 LD = arm-none-eabi-ld -v
51 CP = arm-none-eabi-objcopy
52 OD = arm-none-eabi-objdump
53 CFLAGS = -c -fno-common -O1 -g -mcpu=cortex-m3 -mthumb $(pincs)
54 AFLAGS = -ahls -mapcs-32
55 LFLAGS = -Ttmplink.cmd -nostartfiles
62 platform := stm32f4discovery
66 #usblibs = $(usbsrc)/usbd_core.o $(usbsrc)/usbd_req.o $(usbsrc)/usbd_ioreq.o $(usbsrc)/usbd_core.o $(otgsrc)/usb_dcd.o $(otgsrc)/usb_dcd_int.o $(otgsrc)/usb_hcd.o $(otgsrc)/usb_hcd_int.o $(otgsrc)/usb_otg.o
67 extralibs = lib/cortexm3.o lib/system_stm32f4xx.o lib/stm32f4xx_rcc.o $(psrc)/stm32f4xx_gpio.o $(psrc)/stm32f4xx_usart.o $(usblibs)
71 ifneq (,$(findstring $(board),facedancer10))
74 config = monitor spi maxusb
80 config = monitor spi ccspi
81 MSP430BSL?=goodfet.bsl --z1 --speed=38400
84 ifneq (,$(findstring $(board),goodfet24))
90 ifneq (,$(findstring $(board),nhb12b))
96 ifneq (,$(findstring $(board),nhb12))
102 ifneq (,$(findstring $(board),goodfet50 goodfet51))
107 ifeq ($(board),telosb)
110 config := monitor spi ccspi
114 ifeq ($(board),telosbbt)
117 config := monitor spi ccspi
123 ##################################
124 ## These are experimental boards.
125 ##################################
127 ifneq (,$(findstring $(board),donbfet))
132 CFLAGS=$(DEBUG) -Iinclude -mmcu=$(mcu) -W -Os -mcall-prologues -Wall -Wextra -Wuninitialized -fpack-struct -fshort-enums -funsigned-bitfields
133 config := monitor avr spi jscan
136 ifneq (,$(findstring $(board),arduino))
139 #BSL := avrdude -V -F -c stk500v1 -p m328p -b 57600 -P /dev/tty.usbserial-* -U flash:w:blink.hex
144 ifneq (,$(findstring $(board),tilaunchpad))
146 CFLAGS := -DDEBUG_LEVEL=3 -DDEBUG_START=1 -DINBAND_DEBUG
147 CFLAGS+= -Werror -Wall
148 config := monitor chipcon i2c
155 $(error Please define board, as explained in the README)
157 #platform := $(board)
159 AVAILABLE_APPS = monitor spi jtag sbw jtag430 jtag430x2 i2c jtagarm7 ejtag jtagxscale openocd chipcon avr pic adc nrf ccspi glitch smartcard ps2 slc2 maxusb
168 CONFIG_jtag430x2 ?= y
172 CONFIG_jtagxscale ?= n
181 CONFIG_smartcard ?= n
185 #The CONFIG_foo vars are only interpreted if $(config) is "unset".
186 ifeq ($(config),undef)
187 config += $(foreach app,$(AVAILABLE_APPS),$(if $(findstring $(CONFIG_$(app)),y yes t true Y YES T TRUE),$(app)))