#!/bin/perl -T
#============================================================= -*-perl-*-
#
-# BackupPC_dump: Dump a single PC.
+# BackupPC_dump: Dump a single client.
#
# DESCRIPTION
#
-# Usage: BackupPC_dump [-i] [-f] [-d] [-e] <host>
+# Usage: BackupPC_dump [-i] [-f] [-d] [-e] <client>
#
# Flags:
#
#
# -f Do a full dump, overriding any scheduling.
#
-# -d Host is a DHCP pool address, so initially we have no
-# idea which machine this actually is. BackupPC_dump
-# determines the actual PC host name by using the NetBios
-# name.
+# -d Host is a DHCP pool address, and the client argument
+# just an IP address. We lookup the NetBios name from
+# the IP address.
#
-# -e Just do an dump expiry check for the host. Don't do anything else. # This is used periodically by BackupPC to make sure that dhcp hosts
-# have correctly expired old backups. Without this, dhcp hosts that
-# are no longer on the network will not expire old backups.
+# -e Just do an dump expiry check for the client. Don't do anything
+# else. This is used periodically by BackupPC to make sure that
+# dhcp hosts have correctly expired old backups. Without this,
+# dhcp hosts that are no longer on the network will not expire
+# old backups.
#
-# BackupPC_dump is run periodically by BackupPC to backup $host.
-# The file $TopDir/pc/$host/backups is read to decide whether a
+# BackupPC_dump is run periodically by BackupPC to backup $client.
+# The file $TopDir/pc/$client/backups is read to decide whether a
# full or incremental backup needs to be run. If no backup is
-# scheduled, or a ping to $host fails, then BackupPC_dump quits.
+# scheduled, or a ping to $client fails, then BackupPC_dump quits.
#
# The backup is done using the selected XferMethod (smb, tar, rsync etc),
-# extracting the dump into $TopDir/pc/$host/new. The xfer output is
-# put into $TopDir/pc/$host/XferLOG.
+# extracting the dump into $TopDir/pc/$client/new. The xfer output is
+# put into $TopDir/pc/$client/XferLOG.
#
# If the dump succeeds (based on parsing the output of the XferMethod):
-# - $TopDir/pc/$host/new is renamed to $TopDir/pc/$host/nnn, where
+# - $TopDir/pc/$client/new is renamed to $TopDir/pc/$client/nnn, where
# nnn is the next sequential dump number.
-# - $TopDir/pc/$host/XferLOG is renamed to $TopDir/pc/$host/XferLOG.nnn.
-# - $TopDir/pc/$host/backups is updated.
+# - $TopDir/pc/$client/XferLOG is renamed to $TopDir/pc/$client/XferLOG.nnn.
+# - $TopDir/pc/$client/backups is updated.
#
# If the dump fails:
-# - $TopDir/pc/$host/new is moved to $TopDir/trash for later removal.
-# - $TopDir/pc/$host/XferLOG is renamed to $TopDir/pc/$host/XferLOG.bad
+# - $TopDir/pc/$client/new is moved to $TopDir/trash for later removal.
+# - $TopDir/pc/$client/XferLOG is renamed to $TopDir/pc/$client/XferLOG.bad
# for later viewing.
#
# BackupPC_dump communicates to BackupPC via printing to STDOUT.
#
#========================================================================
#
-# Version 1.6.0_CVS, released 10 Dec 2002.
+# Version 2.0.0_CVS, released 3 Feb 2003.
#
# See http://backuppc.sourceforge.net.
#
my $TopDir = $bpc->TopDir();
my $BinDir = $bpc->BinDir();
my %Conf = $bpc->Conf();
+my $NeedPostCmd;
+my $Hosts;
$bpc->ChildInit();
my %opts;
getopts("defi", \%opts);
if ( @ARGV != 1 ) {
- print("usage: $0 [-d] [-e] [-f] [-i] <host>\n");
+ print("usage: $0 [-d] [-e] [-f] [-i] <client>\n");
exit(1);
}
-if ( $ARGV[0] !~ /^([\w\.-]+)$/ ) {
- print("$0: bad host name '$ARGV[0]'\n");
+if ( $ARGV[0] !~ /^([\w\.\s-]+)$/ ) {
+ print("$0: bad client name '$ARGV[0]'\n");
exit(1);
}
-my $hostIP = $1;
-my($host, $user);
+my $client = $1; # BackupPC's client name (might not be real host name)
+my $hostIP; # this is the IP address
+my $host; # this is the real host name
+
+my($clientURI, $user);
if ( $opts{d} ) {
#
- # The host name $hostIP is simply a DHCP address. We need to check
+ # The client name $client is simply a DHCP address. We need to check
# if there is any machine at this address, and if so, get the actual
# host name via NetBios using nmblookup.
#
- exit(1) if ( $bpc->CheckHostAlive($hostIP) < 0 );
- ($host, $user) = $bpc->NetBiosInfoGet($hostIP);
- exit(1) if ( $host !~ /^([\w\.-]+)$/ );
- my $hosts = $bpc->HostInfoRead($host);
- exit(1) if ( !defined($hosts->{$host}) );
+ $hostIP = $client;
+ exit(1) if ( $bpc->CheckHostAlive($hostIP) < 0
+ || $Conf{NmbLookupCmd} eq "" );
+ ($client, $user) = $bpc->NetBiosInfoGet($hostIP);
+ exit(1) if ( $host !~ /^([\w\.\s-]+)$/ );
+ $Hosts = $bpc->HostInfoRead($client);
+ exit(1) if ( !defined($Hosts->{$client}) );
+ $host = $client;
} else {
- $host = $hostIP;
+ $Hosts = $bpc->HostInfoRead($client);
}
-my $Dir = "$TopDir/pc/$host";
+my $Dir = "$TopDir/pc/$client";
my $xferPid = -1;
my $tarPid = -1;
#
# Re-read config file, so we can include the PC-specific config
#
-if ( defined(my $error = $bpc->ConfigRead($host)) ) {
- print("Can't read PC's config file: $error\n");
+$clientURI = $bpc->uriEsc($client);
+if ( defined(my $error = $bpc->ConfigRead($client)) ) {
+ print("dump failed: Can't read PC's config file: $error\n");
exit(1);
}
%Conf = $bpc->Conf();
$SIG{INT} = \&catch_signal;
$SIG{ALRM} = \&catch_signal;
$SIG{TERM} = \&catch_signal;
+$SIG{PIPE} = \&catch_signal;
+my $Pid = $$;
#
# Make sure we eventually timeout if there is no activity from
# the data transport program.
#
-alarm($Conf{SmbClientTimeout});
+alarm($Conf{ClientTimeout});
mkpath($Dir, 0, 0777) if ( !-d $Dir );
if ( !-f "$Dir/LOCK" ) {
- open(LOCK, ">$Dir/LOCK") && close(LOCK);
+ open(LOCK, ">", "$Dir/LOCK") && close(LOCK);
}
-open(LOG, ">>$Dir/LOG");
+open(LOG, ">>", "$Dir/LOG");
select(LOG); $| = 1; select(STDOUT);
-###########################################################################
-# Figure out what to do and do it
-###########################################################################
-
#
# For the -e option we just expire backups and quit
#
if ( $opts{e} ) {
- BackupExpire($host);
+ BackupExpire($client);
exit(0);
}
+if ( !$opts{d} ) {
+ #
+ # In the non-DHCP case, make sure the host can be looked up
+ # via NS, or otherwise find the IP address via NetBios.
+ #
+ if ( $Conf{ClientNameAlias} ne "" ) {
+ $host = $Conf{ClientNameAlias};
+ } else {
+ $host = $client;
+ }
+ if ( !defined(gethostbyname($host)) ) {
+ #
+ # Ok, NS doesn't know about it. Maybe it is a NetBios name
+ # instead.
+ #
+ if ( !defined($hostIP = $bpc->NetBiosHostIPFind($host)) ) {
+ print(LOG $bpc->timeStamp,
+ "dump failed: Can't find host $host\n");
+ print("dump failed: Can't find host $host\n");
+ exit(1);
+ }
+ } else {
+ $hostIP = $host;
+ }
+}
+
+###########################################################################
+# Figure out what to do and do it
+###########################################################################
+
#
# See if we should skip this host during a certain range
# of times.
print(LOG $bpc->timeStamp, "Can't connect to server ($err)\n");
exit(1);
}
-my $reply = $bpc->ServerMesg("status host($host)");
+my $reply = $bpc->ServerMesg("status host($clientURI)");
$reply = $1 if ( $reply =~ /(.*)/s );
my(%StatusHost);
eval($reply);
# oops, something is already running for this host
exit(0);
}
- print("DHCP $hostIP $host\n");
+ print("DHCP $hostIP $clientURI\n");
}
my($needLink, @Backups, $type, $lastBkupNum, $lastFullBkupNum);
#
# Now see if there are any old backups we should delete
#
-BackupExpire($host);
+BackupExpire($client);
#
# Read Backup information, and find times of the most recent full and
# incremental backups
#
-@Backups = $bpc->BackupInfoRead($host);
+@Backups = $bpc->BackupInfoRead($client);
for ( my $i = 0 ; $i < @Backups ; $i++ ) {
$needLink = 1 if ( $Backups[$i]{nFilesNew} eq ""
|| -f "$Dir/NewFileList.$Backups[$i]{num}" );
if ( $delay < 0 ) {
print(LOG $bpc->timeStamp, "no ping response\n");
print("no ping response\n");
- print("link $host\n") if ( $needLink );
+ print("link $clientURI\n") if ( $needLink );
exit(1);
} elsif ( $delay > $Conf{PingMaxMsec} ) {
printf(LOG "%sping too slow: %.4gmsec\n", $bpc->timeStamp, $delay);
printf("ping too slow: %.4gmsec (threshold is %gmsec)\n",
$delay, $Conf{PingMaxMsec});
- print("link $host\n") if ( $needLink );
+ print("link $clientURI\n") if ( $needLink );
exit(1);
}
$ShareNames = [ $ShareNames ] unless ref($ShareNames) eq "ARRAY";
+#
+# Run an optional pre-dump command
+#
+UserCommandRun("DumpPreUserCmd");
+$NeedPostCmd = 1;
+
#
# Now backup each of the shares
#
# Use rsync as the transport program.
#
if ( !defined($xfer = BackupPC::Xfer::Rsync->new($bpc)) ) {
- print(LOG $bpc->timeStamp,
- "dump failed: File::RsyncP module is not installed\n");
- print("dump failed: Rsync module is not installed\n");
+ my $errStr = BackupPC::Xfer::Rsync::errStr;
+ print(LOG $bpc->timeStamp, "dump failed: $errStr\n");
+ print("dump failed: $errStr\n");
+ UserCommandRun("DumpPostUserCmd") if ( $NeedPostCmd );
exit(1);
}
} else {
#
$xfer = BackupPC::Xfer::Smb->new($bpc);
}
+
my $useTar = $xfer->useTar;
if ( $useTar ) {
open(STDERR, ">&STDOUT");
close(STDIN);
open(STDIN, "<&RH");
- exec("$BinDir/BackupPC_tarExtract '$host' '$shareName'"
- . " $Conf{CompressLevel}");
+ exec("$BinDir/BackupPC_tarExtract", $client, $shareName,
+ $Conf{CompressLevel});
print(LOG $bpc->timeStamp,
"can't exec $BinDir/BackupPC_tarExtract\n");
exit(0);
# We need to create the NewFileList output file
#
local(*NEW_FILES);
- open(NEW_FILES, ">$TopDir/pc/$host/NewFileList")
- || die("can't open $TopDir/pc/$host/NewFileList");
+ open(NEW_FILES, ">", "$TopDir/pc/$client/NewFileList")
+ || die("can't open $TopDir/pc/$client/NewFileList");
$newFilesFH = *NEW_FILES;
}
#
$xfer->args({
host => $host,
+ client => $client,
hostIP => $hostIP,
shareName => $shareName,
pipeRH => *RH,
lastFullBkupNum => $lastFullBkupNum,
backups => \@Backups,
compress => $Conf{CompressLevel},
- XferMethod => => $Conf{XferMethod},
+ XferMethod => $Conf{XferMethod},
});
if ( !defined($logMsg = $xfer->start()) ) {
print(LOG $bpc->timeStamp, "xfer start failed: ", $xfer->errStr, "\n");
print("dump failed: ", $xfer->errStr, "\n");
- print("link $host\n") if ( $needLink );
+ print("link $clientURI\n") if ( $needLink );
#
# kill off the tar process, first nicely then forcefully
#
sleep(1);
kill(9, $tarPid);
}
+ UserCommandRun("DumpPostUserCmd") if ( $NeedPostCmd );
exit(1);
}
$tarOut = $2;
$XferLOG->write(\"tarExtract: $_\n");
if ( /^Done: (\d+) errors, (\d+) filesExist, (\d+) sizeExist, (\d+) sizeExistComp, (\d+) filesTotal, (\d+) sizeTotal/ ) {
- $tarErrs = $1;
- $nFilesExist = $2;
- $sizeExist = $3;
- $sizeExistComp = $4;
- $nFilesTotal = $5;
- $sizeTotal = $6;
+ $tarErrs += $1;
+ $nFilesExist += $2;
+ $sizeExist += $3;
+ $sizeExistComp += $4;
+ $nFilesTotal += $5;
+ $sizeTotal += $6;
}
}
}
#
# otherwise the xfer module does everything for us
#
- ($tarErrs, $nFilesExist, $sizeExist, $sizeExistComp,
- $nFilesTotal, $sizeTotal) = $xfer->run();
+ my @results = $xfer->run();
+ $tarErrs += $results[0];
+ $nFilesExist += $results[1];
+ $sizeExist += $results[2];
+ $sizeExistComp += $results[3];
+ $nFilesTotal += $results[4];
+ $sizeTotal += $results[5];
}
#
last;
}
}
-$XferLOG->close();
-close($newFilesFH) if ( defined($newFilesFH) );
-
my $lastNum = -1;
#
$stat{hostError} = $errMsg;
$stat{xferOK} = 0;
}
+
+UserCommandRun("DumpPostUserCmd") if ( $NeedPostCmd );
+$XferLOG->close();
+close($newFilesFH) if ( defined($newFilesFH) );
+
if ( $stat{xferOK} ) {
- @Backups = $bpc->BackupInfoRead($host);
+ @Backups = $bpc->BackupInfoRead($client);
for ( my $i = 0 ; $i < @Backups ; $i++ ) {
$lastNum = $Backups[$i]{num} if ( $lastNum < $Backups[$i]{num} );
}
rename("$Dir/XferLOG$fileExt", "$Dir/XferLOG.bad$fileExt");
$bpc->RmTreeDefer("$TopDir/trash", "$Dir/new") if ( -d "$Dir/new" );
print("dump failed: $stat{hostError}\n");
- print("link $host\n") if ( $needLink );
+ print("link $clientURI\n") if ( $needLink );
exit(1);
}
#
# Add the new backup information to the backup file
#
-@Backups = $bpc->BackupInfoRead($host);
+@Backups = $bpc->BackupInfoRead($client);
my $i = @Backups;
$Backups[$i]{num} = $lastNum;
$Backups[$i]{type} = $type;
$Backups[$i]{compress} = $Conf{CompressLevel};
$Backups[$i]{noFill} = $type eq "full" ? 0 : 1;
$Backups[$i]{mangle} = 1; # name mangling always on for v1.04+
-$bpc->BackupInfoWrite($host, @Backups);
+$bpc->BackupInfoWrite($client, @Backups);
unlink("$Dir/timeStamp.level0");
. " $stat{xferErrCnt} xferErrs ($stat{xferBadFileCnt} bad files,"
. " $stat{xferBadShareCnt} bad shares, $otherCount other)\n");
-BackupExpire($host);
+BackupExpire($client);
print("$type backup complete\n");
my($needLink) = @_;
print("nothing to do\n");
- print("link $host\n") if ( $needLink );
+ print("link $clientURI\n") if ( $needLink );
exit(0);
}
my $signame = shift;
my $fileExt = $Conf{CompressLevel} > 0 ? ".z" : "";
+ #
+ # Ignore signals in children
+ #
+ return if ( $Pid != $$ );
+
print(LOG $bpc->timeStamp, "cleaning up after signal $signame\n");
+ $SIG{$signame} = 'IGNORE';
+ UserCommandRun("DumpPostUserCmd") if ( $NeedPostCmd );
$XferLOG->write(\"exiting after signal $signame\n");
$XferLOG->close();
if ( $xferPid > 0 ) {
} else {
print("dump failed: received signal=$signame\n");
}
- print("link $host\n") if ( $needLink );
+ print("link $clientURI\n") if ( $needLink );
exit(1);
}
#
sub BackupExpire
{
- my($host) = @_;
- my($Dir) = "$TopDir/pc/$host";
- my(@Backups) = $bpc->BackupInfoRead($host);
+ my($client) = @_;
+ my($Dir) = "$TopDir/pc/$client";
+ my(@Backups) = $bpc->BackupInfoRead($client);
my($cntFull, $cntIncr, $firstFull, $firstIncr, $oldestIncr, $oldestFull);
while ( 1 ) {
last;
}
}
- $bpc->BackupInfoWrite($host, @Backups);
+ $bpc->BackupInfoWrite($client, @Backups);
}
sub CorrectHostCheck
{
my($hostIP, $host) = @_;
- return if ( $hostIP eq $host && !$Conf{FixedIPNetBiosNameCheck} );
+ return if ( $hostIP eq $host && !$Conf{FixedIPNetBiosNameCheck}
+ || $Conf{NmbLookupCmd} eq "" );
my($netBiosHost, $netBiosUser) = $bpc->NetBiosInfoGet($hostIP);
return "host $host has mismatching netbios name $netBiosHost"
- if ( $netBiosHost ne $host );
+ if ( $netBiosHost ne $host );
return;
}
+
+#
+# Run an optional pre- or post-dump command
+#
+sub UserCommandRun
+{
+ my($type) = @_;
+
+ return if ( !defined($Conf{$type}) );
+ my $vars = {
+ xfer => $xfer,
+ client => $client,
+ host => $host,
+ hostIP => $hostIP,
+ user => $Hosts->{$client}{user},
+ moreUsers => $Hosts->{$client}{moreUsers},
+ share => $ShareNames->[0],
+ shares => $ShareNames,
+ XferMethod => $Conf{XferMethod},
+ sshPath => $Conf{SshPath},
+ LOG => *LOG,
+ XferLOG => $XferLOG,
+ stat => \%stat,
+ xferOK => $stat{xferOK},
+ type => $type,
+ };
+ my $cmd = $bpc->cmdVarSubstitute($Conf{$type}, $vars);
+ $XferLOG->write(\"Executing $type: @$cmd\n");
+ #
+ # Run the user's command, dumping the stdout/stderr into the
+ # Xfer log file. Also supply the optional $vars and %Conf in
+ # case the command is really perl code instead of a shell
+ # command.
+ #
+ $bpc->cmdSystemOrEval($cmd,
+ sub {
+ $XferLOG->write(\$_[0]);
+ },
+ $vars, \%Conf);
+}