Arduino port is working, but only at 9600 baud.

[goodfet] / firmware / configs / arduino.sh

diff --git a/firmware/configs/arduino.sh b/firmware/configs/arduino.sh
new file mode 100644 (file)
index 0000000..0088dd3
--- /dev/null
+++ b/firmware/configs/arduino.sh
@@ -0,0 +1,7 @@
+export mcu=atmega168
+export GCC=avr-gcc
+export config=monitor
+export platform=arduino
+echo "Call this as 'source configs/arduino.sh'"
+echo "Assumes an 8MHz Atmega328P by default."
+echo "This port is utterly untested."