arch/mips/kernel/setup.c

   1 /*
   2  * This file is subject to the terms and conditions of the GNU General Public
   3  * License.  See the file "COPYING" in the main directory of this archive
   4  * for more details.
   5  *
   6  * Copyright (C) 1995  Linus Torvalds
   7  * Copyright (C) 1995  Waldorf Electronics
   8  * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001  Ralf Baechle
   9  * Copyright (C) 1996  Stoned Elipot
  10  * Copyright (C) 2000, 2001, 2002  Maciej W. Rozycki
  11  */
  12 #include <linux/config.h>
  13 #include <linux/errno.h>
  14 #include <linux/hdreg.h>
  15 #include <linux/init.h>
  16 #include <linux/ioport.h>
  17 #include <linux/sched.h>
  18 #include <linux/kernel.h>
  19 #include <linux/mm.h>
  20 #include <linux/module.h>
  21 #include <linux/stddef.h>
  22 #include <linux/string.h>
  23 #include <linux/unistd.h>
  24 #include <linux/slab.h>
  25 #include <linux/user.h>
  26 #include <linux/utsname.h>
  27 #include <linux/a.out.h>
  28 #include <linux/tty.h>
  29 #include <linux/bootmem.h>
  30 #include <linux/blk.h>
  31 #include <linux/ide.h>
  32 #include <linux/timex.h>
  33
  34 #include <asm/asm.h>
  35 #include <asm/bootinfo.h>
  36 #include <asm/cachectl.h>
  37 #include <asm/cpu.h>
  38 #include <asm/io.h>
  39 #include <asm/ptrace.h>
  40 #include <asm/system.h>
  41
  42 struct cpuinfo_mips cpu_data[NR_CPUS];
  43 EXPORT_SYMBOL(cpu_data);
  44
  45 /*
  46  * There are several bus types available for MIPS machines.  "RISC PC"
  47  * type machines have ISA, EISA, VLB or PCI available, DECstations
  48  * have Turbochannel or Q-Bus, SGI has GIO, there are lots of VME
  49  * boxes ...
  50  * This flag is set if a EISA slots are available.
  51  */
  52 #ifdef CONFIG_EISA
  53 int EISA_bus = 0;
  54 #endif
  55
  56 struct screen_info screen_info;
  57
  58 #if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
  59 #include <asm/floppy.h>
  60 extern struct fd_ops no_fd_ops;
  61 struct fd_ops *fd_ops;
  62 #endif
  63
  64 #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
  65 extern struct ide_ops no_ide_ops;
  66 struct ide_ops *ide_ops;
  67 #endif
  68
  69 extern void * __rd_start, * __rd_end;
  70
  71 extern struct rtc_ops no_rtc_ops;
  72 struct rtc_ops *rtc_ops;
  73
  74 #ifdef CONFIG_PC_KEYB
  75 struct kbd_ops *kbd_ops;
  76 #endif
  77
  78 /*
  79  * Setup information
  80  *
  81  * These are initialized so they are in the .data section
  82  */
  83 unsigned long mips_machtype = MACH_UNKNOWN;
  84 unsigned long mips_machgroup = MACH_GROUP_UNKNOWN;
  85
  86 struct boot_mem_map boot_mem_map;
  87
  88 unsigned char aux_device_present;
  89 extern char _ftext, _etext, _fdata, _edata, _end;
  90
  91 static char command_line[CL_SIZE];
  92        char saved_command_line[CL_SIZE];
  93 extern char arcs_cmdline[CL_SIZE];
  94
  95 /*
  96  * mips_io_port_base is the begin of the address space to which x86 style
  97  * I/O ports are mapped.
  98  */
  99 const unsigned long mips_io_port_base = -1;
 100 EXPORT_SYMBOL(mips_io_port_base);
 101
 102
 103 /*
 104  * isa_slot_offset is the address where E(ISA) busaddress 0 is mapped
 105  * for the processor.
 106  */
 107 unsigned long isa_slot_offset;
 108 EXPORT_SYMBOL(isa_slot_offset);
 109
 110 extern void SetUpBootInfo(void);
 111 extern void load_mmu(void);
 112 extern asmlinkage void start_kernel(void);
 113 extern void prom_init(int, char **, char **, int *);
 114
 115 static struct resource code_resource = { "Kernel code" };
 116 static struct resource data_resource = { "Kernel data" };
 117
 118 asmlinkage void __init
 119 init_arch(int argc, char **argv, char **envp, int *prom_vec)
 120 {
 121         /* Determine which MIPS variant we are running on. */
 122         cpu_probe();
 123
 124         prom_init(argc, argv, envp, prom_vec);
 125
 126         cpu_report();
 127
 128         /*
 129          * Determine the mmu/cache attached to this machine,
 130          * then flush the tlb and caches.  On the r4xx0
 131          * variants this also sets CP0_WIRED to zero.
 132          */
 133         load_mmu();
 134
 135         /* Disable coprocessors and set FPU for 16/32 FPR register model */
 136         clear_c0_status(ST0_CU1|ST0_CU2|ST0_CU3|ST0_KX|ST0_SX|ST0_FR);
 137         set_c0_status(ST0_CU0);
 138
 139         start_kernel();
 140 }
 141
 142 void __init add_memory_region(phys_t start, phys_t size,
 143                               long type)
 144 {
 145         int x = boot_mem_map.nr_map;
 146
 147         if (x == BOOT_MEM_MAP_MAX) {
 148                 printk("Ooops! Too many entries in the memory map!\n");
 149                 return;
 150         }
 151
 152         boot_mem_map.map[x].addr = start;
 153         boot_mem_map.map[x].size = size;
 154         boot_mem_map.map[x].type = type;
 155         boot_mem_map.nr_map++;
 156 }
 157
 158 static void __init print_memory_map(void)
 159 {
 160         int i;
 161
 162         for (i = 0; i < boot_mem_map.nr_map; i++) {
 163                 printk(" memory: %08Lx @ %08Lx ",
 164                         (u64) boot_mem_map.map[i].size,
 165                         (u64) boot_mem_map.map[i].addr);
 166
 167                 switch (boot_mem_map.map[i].type) {
 168                 case BOOT_MEM_RAM:
 169                         printk("(usable)\n");
 170                         break;
 171                 case BOOT_MEM_ROM_DATA:
 172                         printk("(ROM data)\n");
 173                         break;
 174                 case BOOT_MEM_RESERVED:
 175                         printk("(reserved)\n");
 176                         break;
 177                 default:
 178                         printk("type %lu\n", boot_mem_map.map[i].type);
 179                         break;
 180                 }
 181         }
 182 }
 183
 184 static inline void parse_mem_cmdline(void)
 185 {
 186         char c = ' ', *to = command_line, *from = saved_command_line;
 187         unsigned long start_at, mem_size;
 188         int len = 0;
 189         int usermem = 0;
 190
 191         printk("Determined physical RAM map:\n");
 192         print_memory_map();
 193
 194         for (;;) {
 195                 /*
 196                  * "mem=XXX[kKmM]" defines a memory region from
 197                  * 0 to <XXX>, overriding the determined size.
 198                  * "mem=XXX[KkmM]@YYY[KkmM]" defines a memory region from
 199                  * <YYY> to <YYY>+<XXX>, overriding the determined size.
 200                  */
 201                 if (c == ' ' && !memcmp(from, "mem=", 4)) {
 202                         if (to != command_line)
 203                                 to--;
 204                         /*
 205                          * If a user specifies memory size, we
 206                          * blow away any automatically generated
 207                          * size.
 208                          */
 209                         if (usermem == 0) {
 210                                 boot_mem_map.nr_map = 0;
 211                                 usermem = 1;
 212                         }
 213                         mem_size = memparse(from + 4, &from);
 214                         if (*from == '@')
 215                                 start_at = memparse(from + 1, &from);
 216                         else
 217                                 start_at = 0;
 218                         add_memory_region(start_at, mem_size, BOOT_MEM_RAM);
 219                 }
 220                 c = *(from++);
 221                 if (!c)
 222                         break;
 223                 if (CL_SIZE <= ++len)
 224                         break;
 225                 *(to++) = c;
 226         }
 227         *to = '\0';
 228
 229         if (usermem) {
 230                 printk("User-defined physical RAM map:\n");
 231                 print_memory_map();
 232         }
 233 }
 234
 235
 236 #define PFN_UP(x)       (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT)
 237 #define PFN_DOWN(x)     ((x) >> PAGE_SHIFT)
 238 #define PFN_PHYS(x)     ((x) << PAGE_SHIFT)
 239
 240 #define MAXMEM          HIGHMEM_START
 241 #define MAXMEM_PFN      PFN_DOWN(MAXMEM)
 242
 243 static inline void bootmem_init(void)
 244 {
 245 #ifdef CONFIG_BLK_DEV_INITRD
 246         unsigned long tmp;
 247         unsigned long *initrd_header;
 248 #endif
 249         unsigned long bootmap_size;
 250         unsigned long start_pfn, max_pfn, max_low_pfn, first_usable_pfn;
 251         int i;
 252
 253 #ifdef CONFIG_BLK_DEV_INITRD
 254         tmp = (((unsigned long)&_end + PAGE_SIZE-1) & PAGE_MASK) - 8;
 255         if (tmp < (unsigned long)&_end)
 256                 tmp += PAGE_SIZE;
 257         initrd_header = (unsigned long *)tmp;
 258         if (initrd_header[0] == 0x494E5244) {
 259                 initrd_start = (unsigned long)&initrd_header[2];
 260                 initrd_end = initrd_start + initrd_header[1];
 261         }
 262         start_pfn = PFN_UP(__pa((&_end)+(initrd_end - initrd_start) + PAGE_SIZE));
 263 #else
 264         /*
 265          * Partially used pages are not usable - thus
 266          * we are rounding upwards.
 267          */
 268         start_pfn = PFN_UP(__pa(&_end));
 269 #endif  /* CONFIG_BLK_DEV_INITRD */
 270
 271         /* Find the highest page frame number we have available.  */
 272         max_pfn = 0;
 273         first_usable_pfn = -1UL;
 274         for (i = 0; i < boot_mem_map.nr_map; i++) {
 275                 unsigned long start, end;
 276
 277                 if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
 278                         continue;
 279
 280                 start = PFN_UP(boot_mem_map.map[i].addr);
 281                 end = PFN_DOWN(boot_mem_map.map[i].addr
 282                       + boot_mem_map.map[i].size);
 283
 284                 if (start >= end)
 285                         continue;
 286                 if (end > max_pfn)
 287                         max_pfn = end;
 288                 if (start < first_usable_pfn) {
 289                         if (start > start_pfn) {
 290                                 first_usable_pfn = start;
 291                         } else if (end > start_pfn) {
 292                                 first_usable_pfn = start_pfn;
 293                         }
 294                 }
 295         }
 296
 297         /*
 298          * Determine low and high memory ranges
 299          */
 300         max_low_pfn = max_pfn;
 301         if (max_low_pfn > MAXMEM_PFN) {
 302                 max_low_pfn = MAXMEM_PFN;
 303 #ifndef CONFIG_HIGHMEM
 304                 /* Maximum memory usable is what is directly addressable */
 305                 printk(KERN_WARNING "Warning only %ldMB will be used.\n",
 306                        MAXMEM>>20);
 307                 printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
 308 #endif
 309         }
 310
 311 #ifdef CONFIG_HIGHMEM
 312         /*
 313          * Crude, we really should make a better attempt at detecting
 314          * highstart_pfn
 315          */
 316         highstart_pfn = highend_pfn = max_pfn;
 317         if (max_pfn > MAXMEM_PFN) {
 318                 highstart_pfn = MAXMEM_PFN;
 319                 printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
 320                        (highend_pfn - highstart_pfn) >> (20 - PAGE_SHIFT));
 321         }
 322 #endif
 323
 324         /* Initialize the boot-time allocator with low memory only.  */
 325         bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn);
 326
 327         /*
 328          * Register fully available low RAM pages with the bootmem allocator.
 329          */
 330         for (i = 0; i < boot_mem_map.nr_map; i++) {
 331                 unsigned long curr_pfn, last_pfn, size;
 332
 333                 /*
 334                  * Reserve usable memory.
 335                  */
 336                 if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
 337                         continue;
 338
 339                 /*
 340                  * We are rounding up the start address of usable memory:
 341                  */
 342                 curr_pfn = PFN_UP(boot_mem_map.map[i].addr);
 343                 if (curr_pfn >= max_low_pfn)
 344                         continue;
 345                 if (curr_pfn < start_pfn)
 346                         curr_pfn = start_pfn;
 347
 348                 /*
 349                  * ... and at the end of the usable range downwards:
 350                  */
 351                 last_pfn = PFN_DOWN(boot_mem_map.map[i].addr
 352                                     + boot_mem_map.map[i].size);
 353
 354                 if (last_pfn > max_low_pfn)
 355                         last_pfn = max_low_pfn;
 356
 357                 /*
 358                  * Only register lowmem part of lowmem segment with bootmem.
 359                  */
 360                 size = last_pfn - curr_pfn;
 361                 if (curr_pfn > PFN_DOWN(HIGHMEM_START))
 362                         continue;
 363                 if (curr_pfn + size - 1 > PFN_DOWN(HIGHMEM_START))
 364                         size = PFN_DOWN(HIGHMEM_START) - curr_pfn;
 365                 if (!size)
 366                         continue;
 367
 368                 /*
 369                  * ... finally, did all the rounding and playing
 370                  * around just make the area go away?
 371                  */
 372                 if (last_pfn <= curr_pfn)
 373                         continue;
 374
 375                 /* Register lowmem ranges */
 376                 free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
 377         }
 378
 379         /* Reserve the bootmap memory.  */
 380         reserve_bootmem(PFN_PHYS(first_usable_pfn), bootmap_size);
 381
 382 #ifdef CONFIG_BLK_DEV_INITRD
 383         /* Board specific code should have set up initrd_start and initrd_end */
 384         ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
 385         if (&__rd_start != &__rd_end) {
 386                 initrd_start = (unsigned long)&__rd_start;
 387                 initrd_end = (unsigned long)&__rd_end;
 388         }
 389         initrd_below_start_ok = 1;
 390         if (initrd_start) {
 391                 unsigned long initrd_size = ((unsigned char *)initrd_end) - ((unsigned char *)initrd_start);
 392                 printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
 393                        (void *)initrd_start,
 394                        initrd_size);
 395                 if (PHYSADDR(initrd_end) > PFN_PHYS(max_low_pfn)) {
 396                         printk("initrd extends beyond end of memory "
 397                                "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
 398                                (unsigned long) PHYSADDR(initrd_end),
 399                                PFN_PHYS(max_low_pfn));
 400                         initrd_start = initrd_end = 0;
 401                 }
 402         }
 403 #endif /* CONFIG_BLK_DEV_INITRD  */
 404 }
 405
 406 static inline void resource_init(void)
 407 {
 408         int i;
 409
 410         code_resource.start = virt_to_bus(&_ftext);
 411         code_resource.end = virt_to_bus(&_etext) - 1;
 412         data_resource.start = virt_to_bus(&_fdata);
 413         data_resource.end = virt_to_bus(&_edata) - 1;
 414
 415         /*
 416          * Request address space for all standard RAM.
 417          */
 418         for (i = 0; i < boot_mem_map.nr_map; i++) {
 419                 struct resource *res;
 420                 unsigned long start, end;
 421
 422                 start = boot_mem_map.map[i].addr;
 423                 end = boot_mem_map.map[i].addr + boot_mem_map.map[i].size - 1;
 424                 if (start >= MAXMEM)
 425                         continue;
 426                 if (end >= MAXMEM)
 427                         end = MAXMEM - 1;
 428
 429                 res = alloc_bootmem(sizeof(struct resource));
 430                 switch (boot_mem_map.map[i].type) {
 431                 case BOOT_MEM_RAM:
 432                 case BOOT_MEM_ROM_DATA:
 433                         res->name = "System RAM";
 434                         break;
 435                 case BOOT_MEM_RESERVED:
 436                 default:
 437                         res->name = "reserved";
 438                 }
 439
 440                 res->start = start;
 441                 res->end = end;
 442
 443                 res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 444                 request_resource(&iomem_resource, res);
 445
 446                 /*
 447                  *  We dont't know which RAM region contains kernel data,
 448                  *  so we try it repeatedly and let the resource manager
 449                  *  test it.
 450                  */
 451                 request_resource(res, &code_resource);
 452                 request_resource(res, &data_resource);
 453         }
 454 }
 455
 456 #undef PFN_UP
 457 #undef PFN_DOWN
 458 #undef PFN_PHYS
 459
 460 #undef MAXMEM
 461 #undef MAXMEM_PFN
 462
 463
 464 void __init setup_arch(char **cmdline_p)
 465 {
 466         void atlas_setup(void);
 467         void baget_setup(void);
 468         void cobalt_setup(void);
 469         void lasat_setup(void);
 470         void ddb_setup(void);
 471         void decstation_setup(void);
 472         void deskstation_setup(void);
 473         void jazz_setup(void);
 474         void sni_rm200_pci_setup(void);
 475         void ip22_setup(void);
 476         void ev96100_setup(void);
 477         void malta_setup(void);
 478         void sead_setup(void);
 479         void ikos_setup(void);
 480         void momenco_ocelot_setup(void);
 481         void momenco_ocelot_g_setup(void);
 482         void momenco_ocelot_c_setup(void);
 483         void momenco_jaguar_atx_setup(void);
 484         void nino_setup(void);
 485         void nec_osprey_setup(void);
 486         void nec_eagle_setup(void);
 487         void zao_capcella_setup(void);
 488         void victor_mpc30x_setup(void);
 489         void ibm_workpad_setup(void);
 490         void casio_e55_setup(void);
 491         void tanbac_tb0226_setup(void);
 492         void jmr3927_setup(void);
 493         void tx4927_setup(void);
 494         void it8172_setup(void);
 495         void swarm_setup(void);
 496         void hp_setup(void);
 497         void au1x00_setup(void);
 498         void frame_info_init(void);
 499
 500         frame_info_init();
 501 #if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
 502         fd_ops = &no_fd_ops;
 503 #endif
 504
 505 #ifdef CONFIG_BLK_DEV_IDE
 506         ide_ops = &no_ide_ops;
 507 #endif
 508
 509         rtc_ops = &no_rtc_ops;
 510
 511         switch(mips_machgroup)
 512         {
 513 #ifdef CONFIG_BAGET_MIPS
 514         case MACH_GROUP_BAGET:
 515                 baget_setup();
 516                 break;
 517 #endif
 518 #ifdef CONFIG_MIPS_COBALT
 519         case MACH_GROUP_COBALT:
 520                 cobalt_setup();
 521                 break;
 522 #endif
 523 #ifdef CONFIG_DECSTATION
 524         case MACH_GROUP_DEC:
 525                 decstation_setup();
 526                 break;
 527 #endif
 528 #ifdef CONFIG_MIPS_ATLAS
 529         case MACH_GROUP_UNKNOWN:
 530                 atlas_setup();
 531                 break;
 532 #endif
 533 #ifdef CONFIG_MIPS_JAZZ
 534         case MACH_GROUP_JAZZ:
 535                 jazz_setup();
 536                 break;
 537 #endif
 538 #ifdef CONFIG_MIPS_MALTA
 539         case MACH_GROUP_UNKNOWN:
 540                 malta_setup();
 541                 break;
 542 #endif
 543 #ifdef CONFIG_MOMENCO_OCELOT
 544         case MACH_GROUP_MOMENCO:
 545                 momenco_ocelot_setup();
 546                 break;
 547 #endif
 548 #ifdef CONFIG_MOMENCO_OCELOT_G
 549         case MACH_GROUP_MOMENCO:
 550                 momenco_ocelot_g_setup();
 551                 break;
 552 #endif
 553 #ifdef CONFIG_MOMENCO_OCELOT_C
 554         case MACH_GROUP_MOMENCO:
 555                 momenco_ocelot_c_setup();
 556                 break;
 557 #endif
 558 #ifdef CONFIG_MOMENCO_JAGUAR_ATX
 559         case MACH_GROUP_MOMENCO:
 560                 momenco_jaguar_atx_setup();
 561                 break;
 562 #endif
 563 #ifdef CONFIG_MIPS_SEAD
 564         case MACH_GROUP_UNKNOWN:
 565                 sead_setup();
 566                 break;
 567 #endif
 568 #ifdef CONFIG_SGI_IP22
 569         /* As of now this is only IP22.  */
 570         case MACH_GROUP_SGI:
 571                 ip22_setup();
 572                 break;
 573 #endif
 574 #ifdef CONFIG_SNI_RM200_PCI
 575         case MACH_GROUP_SNI_RM:
 576                 sni_rm200_pci_setup();
 577                 break;
 578 #endif
 579 #ifdef CONFIG_DDB5074
 580         case MACH_GROUP_NEC_DDB:
 581                 ddb_setup();
 582                 break;
 583 #endif
 584 #ifdef CONFIG_DDB5476
 585        case MACH_GROUP_NEC_DDB:
 586                ddb_setup();
 587                break;
 588 #endif
 589 #ifdef CONFIG_DDB5477
 590        case MACH_GROUP_NEC_DDB:
 591                ddb_setup();
 592                break;
 593 #endif
 594 #ifdef CONFIG_CPU_VR41XX
 595         case MACH_GROUP_NEC_VR41XX:
 596                 switch (mips_machtype) {
 597 #ifdef CONFIG_NEC_OSPREY
 598                 case MACH_NEC_OSPREY:
 599                         nec_osprey_setup();
 600                         break;
 601 #endif
 602 #ifdef CONFIG_NEC_EAGLE
 603                 case MACH_NEC_EAGLE:
 604                         nec_eagle_setup();
 605                         break;
 606 #endif
 607 #ifdef CONFIG_ZAO_CAPCELLA
 608                 case MACH_ZAO_CAPCELLA:
 609                         zao_capcella_setup();
 610                         break;
 611 #endif
 612 #ifdef CONFIG_VICTOR_MPC30X
 613                 case MACH_VICTOR_MPC30X:
 614                         victor_mpc30x_setup();
 615                         break;
 616 #endif
 617 #ifdef CONFIG_IBM_WORKPAD
 618                 case MACH_IBM_WORKPAD:
 619                         ibm_workpad_setup();
 620                         break;
 621 #endif
 622 #ifdef CONFIG_CASIO_E55
 623                 case MACH_CASIO_E55:
 624                         casio_e55_setup();
 625                         break;
 626 #endif
 627 #ifdef CONFIG_TANBAC_TB0226
 628                 case MACH_TANBAC_TB0226:
 629                         tanbac_tb0226_setup();
 630                         break;
 631 #endif
 632 #ifdef CONFIG_TANBAC_TB0229
 633                 case MACH_TANBAC_TB0229:
 634                         tanbac_tb0229_setup();
 635                         break;
 636 #endif
 637                 }
 638                 break;
 639 #endif
 640 #ifdef CONFIG_MIPS_EV96100
 641         case MACH_GROUP_GALILEO:
 642                 ev96100_setup();
 643                 break;
 644 #endif
 645 #ifdef CONFIG_MIPS_EV64120
 646         case MACH_GROUP_GALILEO:
 647                 ev64120_setup();
 648                 break;
 649 #endif
 650 #if defined(CONFIG_MIPS_IVR) || defined(CONFIG_MIPS_ITE8172)
 651         case  MACH_GROUP_ITE:
 652         case  MACH_GROUP_GLOBESPAN:
 653                 it8172_setup();
 654                 break;
 655 #endif
 656 #ifdef CONFIG_NINO
 657         case MACH_GROUP_PHILIPS:
 658                 nino_setup();
 659                 break;
 660 #endif
 661 #ifdef CONFIG_LASAT
 662         case MACH_GROUP_LASAT:
 663                 lasat_setup();
 664                 break;
 665 #endif
 666 #ifdef CONFIG_SOC_AU1X00
 667         case MACH_GROUP_ALCHEMY:
 668                 au1x00_setup();
 669                 break;
 670 #endif
 671 #ifdef CONFIG_TOSHIBA_JMR3927
 672         case MACH_GROUP_TOSHIBA:
 673                 jmr3927_setup();
 674                 break;
 675 #endif
 676 #ifdef CONFIG_TOSHIBA_RBTX4927
 677        case MACH_GROUP_TOSHIBA:
 678                tx4927_setup();
 679                break;
 680 #endif
 681 #ifdef CONFIG_SIBYTE_BOARD
 682         case MACH_GROUP_SIBYTE:
 683                 swarm_setup();
 684                 break;
 685 #endif
 686 #ifdef CONFIG_HP_LASERJET
 687         case MACH_GROUP_HP_LJ:
 688                 hp_setup();
 689                 break;
 690 #endif
 691 #ifdef  CONFIG_PMC_YOSEMITE
 692         case MACH_GROUP_TITAN:
 693                 pmc_yosemite_setup();
 694                 break;
 695 #endif
 696         default:
 697                 panic("Unsupported architecture");
 698         }
 699
 700         strncpy(command_line, arcs_cmdline, sizeof command_line);
 701         command_line[sizeof command_line - 1] = 0;
 702         strcpy(saved_command_line, command_line);
 703         *cmdline_p = command_line;
 704
 705         parse_mem_cmdline();
 706
 707         bootmem_init();
 708
 709         paging_init();
 710
 711         resource_init();
 712 }
 713
 714 static int __init fpu_disable(char *s)
 715 {
 716         cpu_data[0].options &= ~MIPS_CPU_FPU;
 717
 718         return 1;
 719 }
 720 __setup("nofpu", fpu_disable);