drivers/scsi/gvp11.c

   1 #include <linux/types.h>
   2 #include <linux/mm.h>
   3 #include <linux/blk.h>
   4 #include <linux/sched.h>
   5 #include <linux/version.h>
   6 #include <linux/init.h>
   7
   8 #include <asm/setup.h>
   9 #include <asm/page.h>
  10 #include <asm/pgtable.h>
  11 #include <asm/amigaints.h>
  12 #include <asm/amigahw.h>
  13 #include <linux/zorro.h>
  14 #include <asm/irq.h>
  15 #include <linux/spinlock.h>
  16
  17 #include "scsi.h"
  18 #include "hosts.h"
  19 #include "wd33c93.h"
  20 #include "gvp11.h"
  21
  22 #include<linux/stat.h>
  23
  24 #define DMA(ptr) ((gvp11_scsiregs *)((ptr)->base))
  25 #define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata))
  26
  27 static struct Scsi_Host *first_instance = NULL;
  28 static Scsi_Host_Template *gvp11_template;
  29
  30 static void gvp11_intr (int irq, void *dummy, struct pt_regs *fp)
  31 {
  32     unsigned long flags;
  33     unsigned int status;
  34     struct Scsi_Host *instance;
  35
  36     for (instance = first_instance; instance &&
  37          instance->hostt == gvp11_template; instance = instance->next)
  38     {
  39         status = DMA(instance)->CNTR;
  40         if (!(status & GVP11_DMAC_INT_PENDING))
  41             continue;
  42
  43         spin_lock_irqsave(&io_request_lock, flags);
  44         wd33c93_intr (instance);
  45         spin_unlock_irqrestore(&io_request_lock, flags);
  46     }
  47 }
  48
  49 static int gvp11_xfer_mask = 0;
  50
  51 void gvp11_setup (char *str, int *ints)
  52 {
  53     gvp11_xfer_mask = ints[1];
  54 }
  55
  56 static int dma_setup (Scsi_Cmnd *cmd, int dir_in)
  57 {
  58     unsigned short cntr = GVP11_DMAC_INT_ENABLE;
  59     unsigned long addr = virt_to_bus(cmd->SCp.ptr);
  60     int bank_mask;
  61     static int scsi_alloc_out_of_range = 0;
  62
  63     /* use bounce buffer if the physical address is bad */
  64     if (addr & HDATA(cmd->host)->dma_xfer_mask ||
  65         (!dir_in && mm_end_of_chunk (addr, cmd->SCp.this_residual)))
  66     {
  67         HDATA(cmd->host)->dma_bounce_len = (cmd->SCp.this_residual + 511)
  68             & ~0x1ff;
  69
  70         if( !scsi_alloc_out_of_range ) {
  71             HDATA(cmd->host)->dma_bounce_buffer =
  72                 scsi_malloc (HDATA(cmd->host)->dma_bounce_len);
  73             HDATA(cmd->host)->dma_buffer_pool = BUF_SCSI_ALLOCED;
  74         }
  75
  76         if ( scsi_alloc_out_of_range || !HDATA(cmd->host)->dma_bounce_buffer) {
  77             HDATA(cmd->host)->dma_bounce_buffer =
  78                 amiga_chip_alloc(HDATA(cmd->host)->dma_bounce_len,
  79                                        "GVP II SCSI Bounce Buffer");
  80
  81             if(!HDATA(cmd->host)->dma_bounce_buffer)
  82             {
  83                 HDATA(cmd->host)->dma_bounce_len = 0;
  84                 return 1;
  85             }
  86
  87             HDATA(cmd->host)->dma_buffer_pool = BUF_CHIP_ALLOCED;
  88         }
  89
  90         /* check if the address of the bounce buffer is OK */
  91         addr = virt_to_bus(HDATA(cmd->host)->dma_bounce_buffer);
  92
  93         if (addr & HDATA(cmd->host)->dma_xfer_mask) {
  94             /* fall back to Chip RAM if address out of range */
  95             if( HDATA(cmd->host)->dma_buffer_pool == BUF_SCSI_ALLOCED) {
  96                 scsi_free (HDATA(cmd->host)->dma_bounce_buffer,
  97                            HDATA(cmd->host)->dma_bounce_len);
  98                 scsi_alloc_out_of_range = 1;
  99             } else {
 100                 amiga_chip_free (HDATA(cmd->host)->dma_bounce_buffer);
 101             }
 102
 103             HDATA(cmd->host)->dma_bounce_buffer =
 104                 amiga_chip_alloc(HDATA(cmd->host)->dma_bounce_len,
 105                                        "GVP II SCSI Bounce Buffer");
 106
 107             if(!HDATA(cmd->host)->dma_bounce_buffer)
 108             {
 109                 HDATA(cmd->host)->dma_bounce_len = 0;
 110                 return 1;
 111             }
 112
 113             addr = virt_to_bus(HDATA(cmd->host)->dma_bounce_buffer);
 114             HDATA(cmd->host)->dma_buffer_pool = BUF_CHIP_ALLOCED;
 115         }
 116
 117         if (!dir_in) {
 118             /* copy to bounce buffer for a write */
 119             memcpy (HDATA(cmd->host)->dma_bounce_buffer,
 120                     cmd->SCp.ptr, cmd->SCp.this_residual);
 121         }
 122     }
 123
 124     /* setup dma direction */
 125     if (!dir_in)
 126         cntr |= GVP11_DMAC_DIR_WRITE;
 127
 128     HDATA(cmd->host)->dma_dir = dir_in;
 129     DMA(cmd->host)->CNTR = cntr;
 130
 131     /* setup DMA *physical* address */
 132     DMA(cmd->host)->ACR = addr;
 133
 134     if (dir_in)
 135         /* invalidate any cache */
 136         cache_clear (addr, cmd->SCp.this_residual);
 137     else
 138         /* push any dirty cache */
 139         cache_push (addr, cmd->SCp.this_residual);
 140
 141     if ((bank_mask = (~HDATA(cmd->host)->dma_xfer_mask >> 18) & 0x01c0))
 142             DMA(cmd->host)->BANK = bank_mask & (addr >> 18);
 143
 144     /* start DMA */
 145     DMA(cmd->host)->ST_DMA = 1;
 146
 147     /* return success */
 148     return 0;
 149 }
 150
 151 static void dma_stop (struct Scsi_Host *instance, Scsi_Cmnd *SCpnt,
 152                       int status)
 153 {
 154     /* stop DMA */
 155     DMA(instance)->SP_DMA = 1;
 156     /* remove write bit from CONTROL bits */
 157     DMA(instance)->CNTR = GVP11_DMAC_INT_ENABLE;
 158
 159     /* copy from a bounce buffer, if necessary */
 160     if (status && HDATA(instance)->dma_bounce_buffer) {
 161         if (HDATA(instance)->dma_dir && SCpnt)
 162             memcpy (SCpnt->SCp.ptr,
 163                     HDATA(instance)->dma_bounce_buffer,
 164                     SCpnt->SCp.this_residual);
 165
 166         if (HDATA(instance)->dma_buffer_pool == BUF_SCSI_ALLOCED)
 167             scsi_free (HDATA(instance)->dma_bounce_buffer,
 168                        HDATA(instance)->dma_bounce_len);
 169         else
 170             amiga_chip_free(HDATA(instance)->dma_bounce_buffer);
 171
 172         HDATA(instance)->dma_bounce_buffer = NULL;
 173         HDATA(instance)->dma_bounce_len = 0;
 174     }
 175 }
 176
 177 static int num_gvp11 = 0;
 178
 179 #define CHECK_WD33C93
 180
 181 int __init gvp11_detect(Scsi_Host_Template *tpnt)
 182 {
 183     static unsigned char called = 0;
 184     struct Scsi_Host *instance;
 185     unsigned long address;
 186     unsigned int epc;
 187     struct zorro_dev *z = NULL;
 188     unsigned int default_dma_xfer_mask;
 189     wd33c93_regs regs;
 190 #ifdef CHECK_WD33C93
 191     volatile unsigned char *sasr_3393, *scmd_3393;
 192     unsigned char save_sasr;
 193     unsigned char q, qq;
 194 #endif
 195
 196     if (!MACH_IS_AMIGA || called)
 197         return 0;
 198     called = 1;
 199
 200     tpnt->proc_name = "GVP11";
 201     tpnt->proc_info = &wd33c93_proc_info;
 202
 203     while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
 204         /*
 205          * This should (hopefully) be the correct way to identify
 206          * all the different GVP SCSI controllers (except for the
 207          * SERIES I though).
 208          */
 209
 210         if (z->id == ZORRO_PROD_GVP_COMBO_030_R3_SCSI ||
 211             z->id == ZORRO_PROD_GVP_SERIES_II)
 212             default_dma_xfer_mask = ~0x00ffffff;
 213         else if (z->id == ZORRO_PROD_GVP_GFORCE_030_SCSI ||
 214                  z->id == ZORRO_PROD_GVP_A530_SCSI ||
 215                  z->id == ZORRO_PROD_GVP_COMBO_030_R4_SCSI)
 216             default_dma_xfer_mask = ~0x01ffffff;
 217         else if (z->id == ZORRO_PROD_GVP_A1291 ||
 218                  z->id == ZORRO_PROD_GVP_GFORCE_040_SCSI_1)
 219             default_dma_xfer_mask = ~0x07ffffff;
 220         else
 221             continue;
 222
 223         /*
 224          * Rumors state that some GVP ram boards use the same product
 225          * code as the SCSI controllers. Therefore if the board-size
 226          * is not 64KB we asume it is a ram board and bail out.
 227          */
 228         if (z->resource.end-z->resource.start != 0xffff)
 229                 continue;
 230
 231         address = z->resource.start;
 232         if (!request_mem_region(address, 256, "wd33c93"))
 233             continue;
 234
 235 #ifdef CHECK_WD33C93
 236
 237         /*
 238          * These darn GVP boards are a problem - it can be tough to tell
 239          * whether or not they include a SCSI controller. This is the
 240          * ultimate Yet-Another-GVP-Detection-Hack in that it actually
 241          * probes for a WD33c93 chip: If we find one, it's extremely
 242          * likely that this card supports SCSI, regardless of Product_
 243          * Code, Board_Size, etc.
 244          */
 245
 246     /* Get pointers to the presumed register locations and save contents */
 247
 248         sasr_3393 = &(((gvp11_scsiregs *)(ZTWO_VADDR(address)))->SASR);
 249         scmd_3393 = &(((gvp11_scsiregs *)(ZTWO_VADDR(address)))->SCMD);
 250         save_sasr = *sasr_3393;
 251
 252     /* First test the AuxStatus Reg */
 253
 254         q = *sasr_3393;         /* read it */
 255         if (q & 0x08)           /* bit 3 should always be clear */
 256                 goto release;
 257         *sasr_3393 = WD_AUXILIARY_STATUS;        /* setup indirect address */
 258         if (*sasr_3393 == WD_AUXILIARY_STATUS) { /* shouldn't retain the write */
 259                 *sasr_3393 = save_sasr; /* Oops - restore this byte */
 260                 goto release;
 261                 }
 262         if (*sasr_3393 != q) {  /* should still read the same */
 263                 *sasr_3393 = save_sasr; /* Oops - restore this byte */
 264                 goto release;
 265                 }
 266         if (*scmd_3393 != q)    /* and so should the image at 0x1f */
 267                 goto release;
 268
 269
 270     /* Ok, we probably have a wd33c93, but let's check a few other places
 271      * for good measure. Make sure that this works for both 'A and 'B
 272      * chip versions.
 273      */
 274
 275         *sasr_3393 = WD_SCSI_STATUS;
 276         q = *scmd_3393;
 277         *sasr_3393 = WD_SCSI_STATUS;
 278         *scmd_3393 = ~q;
 279         *sasr_3393 = WD_SCSI_STATUS;
 280         qq = *scmd_3393;
 281         *sasr_3393 = WD_SCSI_STATUS;
 282         *scmd_3393 = q;
 283         if (qq != q)                    /* should be read only */
 284                 goto release;
 285         *sasr_3393 = 0x1e;      /* this register is unimplemented */
 286         q = *scmd_3393;
 287         *sasr_3393 = 0x1e;
 288         *scmd_3393 = ~q;
 289         *sasr_3393 = 0x1e;
 290         qq = *scmd_3393;
 291         *sasr_3393 = 0x1e;
 292         *scmd_3393 = q;
 293         if (qq != q || qq != 0xff)      /* should be read only, all 1's */
 294                 goto release;
 295         *sasr_3393 = WD_TIMEOUT_PERIOD;
 296         q = *scmd_3393;
 297         *sasr_3393 = WD_TIMEOUT_PERIOD;
 298         *scmd_3393 = ~q;
 299         *sasr_3393 = WD_TIMEOUT_PERIOD;
 300         qq = *scmd_3393;
 301         *sasr_3393 = WD_TIMEOUT_PERIOD;
 302         *scmd_3393 = q;
 303         if (qq != (~q & 0xff))          /* should be read/write */
 304                 goto release;
 305 #endif
 306
 307         instance = scsi_register (tpnt, sizeof (struct WD33C93_hostdata));
 308         if(instance == NULL)
 309                 goto release;
 310         instance->base = ZTWO_VADDR(address);
 311         instance->irq = IRQ_AMIGA_PORTS;
 312         instance->unique_id = z->slotaddr;
 313
 314         if (gvp11_xfer_mask)
 315                 HDATA(instance)->dma_xfer_mask = gvp11_xfer_mask;
 316         else
 317                 HDATA(instance)->dma_xfer_mask = default_dma_xfer_mask;
 318
 319
 320         DMA(instance)->secret2 = 1;
 321         DMA(instance)->secret1 = 0;
 322         DMA(instance)->secret3 = 15;
 323         while (DMA(instance)->CNTR & GVP11_DMAC_BUSY) ;
 324         DMA(instance)->CNTR = 0;
 325
 326         DMA(instance)->BANK = 0;
 327
 328         epc = *(unsigned short *)(ZTWO_VADDR(address) + 0x8000);
 329
 330         /*
 331          * Check for 14MHz SCSI clock
 332          */
 333         regs.SASR = &(DMA(instance)->SASR);
 334         regs.SCMD = &(DMA(instance)->SCMD);
 335         wd33c93_init(instance, regs, dma_setup, dma_stop,
 336                      (epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10
 337                                              : WD33C93_FS_12_15);
 338
 339         if (num_gvp11++ == 0) {
 340                 first_instance = instance;
 341                 gvp11_template = instance->hostt;
 342                 request_irq(IRQ_AMIGA_PORTS, gvp11_intr, SA_SHIRQ,
 343                             "GVP11 SCSI", gvp11_intr);
 344         }
 345         DMA(instance)->CNTR = GVP11_DMAC_INT_ENABLE;
 346         continue;
 347
 348 release:
 349         release_mem_region(address, 256);
 350     }
 351
 352     return num_gvp11;
 353 }
 354
 355
 356 #define HOSTS_C
 357
 358 #include "gvp11.h"
 359
 360 static Scsi_Host_Template driver_template = GVP11_SCSI;
 361
 362 #include "scsi_module.c"
 363
 364 int gvp11_release(struct Scsi_Host *instance)
 365 {
 366 #ifdef MODULE
 367     DMA(instance)->CNTR = 0;
 368     release_mem_region(ZTWO_PADDR(instance->base), 256);
 369     if (--num_gvp11 == 0)
 370             free_irq(IRQ_AMIGA_PORTS, gvp11_intr);
 371     wd33c93_release();
 372 #endif
 373     return 1;
 374 }
 375
 376 MODULE_LICENSE("GPL");