5 * 'tty.h' defines some structures used by tty_io.c and some defines.
9 * These constants are also useful for user-level apps (e.g., VC
12 #define MIN_NR_CONSOLES 1 /* must be at least 1 */
13 #define MAX_NR_CONSOLES 63 /* serial lines start at 64 */
14 #define MAX_NR_USER_CONSOLES 63 /* must be root to allocate above this */
15 /* Note: the ioctl VT_GETSTATE does not work for
16 consoles 16 and higher (since it returns a short) */
19 #include <linux/config.h>
21 #include <linux/major.h>
22 #include <linux/termios.h>
23 #include <linux/tqueue.h>
24 #include <linux/tty_driver.h>
25 #include <linux/tty_ldisc.h>
27 #include <asm/system.h>
31 * Note: don't mess with NR_PTYS until you understand the tty minor
32 * number allocation game...
33 * (Note: the *_driver.minor_start values 1, 64, 128, 192 are
34 * hardcoded at present.)
36 #define NR_PTYS 256 /* ptys/major */
40 * Unix98 PTY's can be defined as any multiple of NR_PTYS up to
41 * UNIX98_PTY_MAJOR_COUNT; this section defines what we need from the
44 #ifdef CONFIG_UNIX98_PTYS
45 # define UNIX98_NR_MAJORS ((CONFIG_UNIX98_PTY_COUNT+NR_PTYS-1)/NR_PTYS)
46 # if UNIX98_NR_MAJORS <= 0
47 # undef CONFIG_UNIX98_PTYS
48 # elif UNIX98_NR_MAJORS > UNIX98_PTY_MAJOR_COUNT
49 # error Too many Unix98 ptys defined
50 # undef UNIX98_NR_MAJORS
51 # define UNIX98_NR_MAJORS UNIX98_PTY_MAJOR_COUNT
56 * These are set up by the setup-routine at boot-time:
62 u16 dontuse1; /* 0x02 -- EXT_MEM_K sits here */
63 u16 orig_video_page; /* 0x04 */
64 u8 orig_video_mode; /* 0x06 */
65 u8 orig_video_cols; /* 0x07 */
66 u16 unused2; /* 0x08 */
67 u16 orig_video_ega_bx; /* 0x0a */
68 u16 unused3; /* 0x0c */
69 u8 orig_video_lines; /* 0x0e */
70 u8 orig_video_isVGA; /* 0x0f */
71 u16 orig_video_points; /* 0x10 */
73 /* VESA graphic mode -- linear frame buffer */
74 u16 lfb_width; /* 0x12 */
75 u16 lfb_height; /* 0x14 */
76 u16 lfb_depth; /* 0x16 */
77 u32 lfb_base; /* 0x18 */
78 u32 lfb_size; /* 0x1c */
79 u16 dontuse2, dontuse3; /* 0x20 -- CL_MAGIC and CL_OFFSET here */
80 u16 lfb_linelength; /* 0x24 */
81 u8 red_size; /* 0x26 */
82 u8 red_pos; /* 0x27 */
83 u8 green_size; /* 0x28 */
84 u8 green_pos; /* 0x29 */
85 u8 blue_size; /* 0x2a */
86 u8 blue_pos; /* 0x2b */
87 u8 rsvd_size; /* 0x2c */
88 u8 rsvd_pos; /* 0x2d */
89 u16 vesapm_seg; /* 0x2e */
90 u16 vesapm_off; /* 0x30 */
92 /* 0x34 -- 0x3f reserved for future expansion */
95 extern struct screen_info screen_info;
97 #define ORIG_X (screen_info.orig_x)
98 #define ORIG_Y (screen_info.orig_y)
99 #define ORIG_VIDEO_MODE (screen_info.orig_video_mode)
100 #define ORIG_VIDEO_COLS (screen_info.orig_video_cols)
101 #define ORIG_VIDEO_EGA_BX (screen_info.orig_video_ega_bx)
102 #define ORIG_VIDEO_LINES (screen_info.orig_video_lines)
103 #define ORIG_VIDEO_ISVGA (screen_info.orig_video_isVGA)
104 #define ORIG_VIDEO_POINTS (screen_info.orig_video_points)
106 #define VIDEO_TYPE_MDA 0x10 /* Monochrome Text Display */
107 #define VIDEO_TYPE_CGA 0x11 /* CGA Display */
108 #define VIDEO_TYPE_EGAM 0x20 /* EGA/VGA in Monochrome Mode */
109 #define VIDEO_TYPE_EGAC 0x21 /* EGA in Color Mode */
110 #define VIDEO_TYPE_VGAC 0x22 /* VGA+ in Color Mode */
111 #define VIDEO_TYPE_VLFB 0x23 /* VESA VGA in graphic mode */
113 #define VIDEO_TYPE_PICA_S3 0x30 /* ACER PICA-61 local S3 video */
114 #define VIDEO_TYPE_MIPS_G364 0x31 /* MIPS Magnum 4000 G364 video */
115 #define VIDEO_TYPE_SNI_RM 0x32 /* SNI RM200 PCI video */
116 #define VIDEO_TYPE_SGI 0x33 /* Various SGI graphics hardware */
118 #define VIDEO_TYPE_TGAC 0x40 /* DEC TGA */
120 #define VIDEO_TYPE_SUN 0x50 /* Sun frame buffer. */
121 #define VIDEO_TYPE_SUNPCI 0x51 /* Sun PCI based frame buffer. */
123 #define VIDEO_TYPE_PMAC 0x60 /* PowerMacintosh frame buffer. */
126 * This character is the same as _POSIX_VDISABLE: it cannot be used as
127 * a c_cc[] character, but indicates that a particular special character
128 * isn't in use (eg VINTR has no character etc)
130 #define __DISABLED_CHAR '\0'
133 * This is the flip buffer used for the tty driver. The buffer is
134 * located in the tty structure, and is used as a high speed interface
135 * between the tty driver and the tty line discipline.
137 #define TTY_FLIPBUF_SIZE 512
139 struct tty_flip_buffer {
140 struct tq_struct tqueue;
141 struct semaphore pty_sem;
143 unsigned char *flag_buf_ptr;
146 unsigned char char_buf[2*TTY_FLIPBUF_SIZE];
147 char flag_buf[2*TTY_FLIPBUF_SIZE];
148 unsigned char slop[4]; /* N.B. bug overwrites buffer by 1 */
151 * The pty uses char_buf and flag_buf as a contiguous buffer
153 #define PTY_BUF_SIZE 4*TTY_FLIPBUF_SIZE
156 * When a break, frame error, or parity error happens, these codes are
157 * stuffed into the flags buffer.
163 #define TTY_OVERRUN 4
165 #define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR])
166 #define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT])
167 #define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE])
168 #define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL])
169 #define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF])
170 #define TIME_CHAR(tty) ((tty)->termios->c_cc[VTIME])
171 #define MIN_CHAR(tty) ((tty)->termios->c_cc[VMIN])
172 #define SWTC_CHAR(tty) ((tty)->termios->c_cc[VSWTC])
173 #define START_CHAR(tty) ((tty)->termios->c_cc[VSTART])
174 #define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP])
175 #define SUSP_CHAR(tty) ((tty)->termios->c_cc[VSUSP])
176 #define EOL_CHAR(tty) ((tty)->termios->c_cc[VEOL])
177 #define REPRINT_CHAR(tty) ((tty)->termios->c_cc[VREPRINT])
178 #define DISCARD_CHAR(tty) ((tty)->termios->c_cc[VDISCARD])
179 #define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE])
180 #define LNEXT_CHAR(tty) ((tty)->termios->c_cc[VLNEXT])
181 #define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2])
183 #define _I_FLAG(tty,f) ((tty)->termios->c_iflag & (f))
184 #define _O_FLAG(tty,f) ((tty)->termios->c_oflag & (f))
185 #define _C_FLAG(tty,f) ((tty)->termios->c_cflag & (f))
186 #define _L_FLAG(tty,f) ((tty)->termios->c_lflag & (f))
188 #define I_IGNBRK(tty) _I_FLAG((tty),IGNBRK)
189 #define I_BRKINT(tty) _I_FLAG((tty),BRKINT)
190 #define I_IGNPAR(tty) _I_FLAG((tty),IGNPAR)
191 #define I_PARMRK(tty) _I_FLAG((tty),PARMRK)
192 #define I_INPCK(tty) _I_FLAG((tty),INPCK)
193 #define I_ISTRIP(tty) _I_FLAG((tty),ISTRIP)
194 #define I_INLCR(tty) _I_FLAG((tty),INLCR)
195 #define I_IGNCR(tty) _I_FLAG((tty),IGNCR)
196 #define I_ICRNL(tty) _I_FLAG((tty),ICRNL)
197 #define I_IUCLC(tty) _I_FLAG((tty),IUCLC)
198 #define I_IXON(tty) _I_FLAG((tty),IXON)
199 #define I_IXANY(tty) _I_FLAG((tty),IXANY)
200 #define I_IXOFF(tty) _I_FLAG((tty),IXOFF)
201 #define I_IMAXBEL(tty) _I_FLAG((tty),IMAXBEL)
203 #define O_OPOST(tty) _O_FLAG((tty),OPOST)
204 #define O_OLCUC(tty) _O_FLAG((tty),OLCUC)
205 #define O_ONLCR(tty) _O_FLAG((tty),ONLCR)
206 #define O_OCRNL(tty) _O_FLAG((tty),OCRNL)
207 #define O_ONOCR(tty) _O_FLAG((tty),ONOCR)
208 #define O_ONLRET(tty) _O_FLAG((tty),ONLRET)
209 #define O_OFILL(tty) _O_FLAG((tty),OFILL)
210 #define O_OFDEL(tty) _O_FLAG((tty),OFDEL)
211 #define O_NLDLY(tty) _O_FLAG((tty),NLDLY)
212 #define O_CRDLY(tty) _O_FLAG((tty),CRDLY)
213 #define O_TABDLY(tty) _O_FLAG((tty),TABDLY)
214 #define O_BSDLY(tty) _O_FLAG((tty),BSDLY)
215 #define O_VTDLY(tty) _O_FLAG((tty),VTDLY)
216 #define O_FFDLY(tty) _O_FLAG((tty),FFDLY)
218 #define C_BAUD(tty) _C_FLAG((tty),CBAUD)
219 #define C_CSIZE(tty) _C_FLAG((tty),CSIZE)
220 #define C_CSTOPB(tty) _C_FLAG((tty),CSTOPB)
221 #define C_CREAD(tty) _C_FLAG((tty),CREAD)
222 #define C_PARENB(tty) _C_FLAG((tty),PARENB)
223 #define C_PARODD(tty) _C_FLAG((tty),PARODD)
224 #define C_HUPCL(tty) _C_FLAG((tty),HUPCL)
225 #define C_CLOCAL(tty) _C_FLAG((tty),CLOCAL)
226 #define C_CIBAUD(tty) _C_FLAG((tty),CIBAUD)
227 #define C_CRTSCTS(tty) _C_FLAG((tty),CRTSCTS)
229 #define L_ISIG(tty) _L_FLAG((tty),ISIG)
230 #define L_ICANON(tty) _L_FLAG((tty),ICANON)
231 #define L_XCASE(tty) _L_FLAG((tty),XCASE)
232 #define L_ECHO(tty) _L_FLAG((tty),ECHO)
233 #define L_ECHOE(tty) _L_FLAG((tty),ECHOE)
234 #define L_ECHOK(tty) _L_FLAG((tty),ECHOK)
235 #define L_ECHONL(tty) _L_FLAG((tty),ECHONL)
236 #define L_NOFLSH(tty) _L_FLAG((tty),NOFLSH)
237 #define L_TOSTOP(tty) _L_FLAG((tty),TOSTOP)
238 #define L_ECHOCTL(tty) _L_FLAG((tty),ECHOCTL)
239 #define L_ECHOPRT(tty) _L_FLAG((tty),ECHOPRT)
240 #define L_ECHOKE(tty) _L_FLAG((tty),ECHOKE)
241 #define L_FLUSHO(tty) _L_FLAG((tty),FLUSHO)
242 #define L_PENDIN(tty) _L_FLAG((tty),PENDIN)
243 #define L_IEXTEN(tty) _L_FLAG((tty),IEXTEN)
246 * Where all of the state associated with a tty is kept while the tty
247 * is open. Since the termios state should be kept even if the tty
248 * has been closed --- for things like the baud rate, etc --- it is
249 * not stored here, but rather a pointer to the real state is stored
250 * here. Possible the winsize structure should have the same
251 * treatment, but (1) the default 80x24 is usually right and (2) it's
252 * most often used by a windowing system, which will set the correct
253 * size each time the window is created or resized anyway.
254 * IMPORTANT: since this structure is dynamically allocated, it must
255 * be no larger than 4096 bytes. Changing TTY_FLIPBUF_SIZE will change
256 * the size of this structure, and it needs to be done with care.
261 struct tty_driver driver;
262 struct tty_ldisc ldisc;
263 struct termios *termios, *termios_locked;
269 struct winsize winsize;
270 unsigned char stopped:1, hw_stopped:1, flow_stopped:1, packet:1;
271 unsigned char low_latency:1, warned:1;
272 unsigned char ctrl_status;
274 struct tty_struct *link;
275 struct fasync_struct *fasync;
276 struct tty_flip_buffer flip;
278 int alt_speed; /* For magic substitution of 38400 bps */
279 wait_queue_head_t write_wait;
280 wait_queue_head_t read_wait;
281 struct tq_struct tq_hangup;
284 struct list_head tty_files;
286 #define N_TTY_BUF_SIZE 4096
289 * The following is data for the N_TTY line discipline. For
290 * historical reasons, this is included in the tty structure.
293 unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
294 unsigned char closing:1;
295 unsigned short minimum_to_wake;
296 unsigned overrun_time;
298 unsigned long process_char_map[256/(8*sizeof(unsigned long))];
303 unsigned long read_flags[N_TTY_BUF_SIZE/(8*sizeof(unsigned long))];
305 unsigned long canon_head;
306 unsigned int canon_column;
307 struct semaphore atomic_read;
308 struct semaphore atomic_write;
309 spinlock_t read_lock;
310 /* If the tty has a pending do_SAK, queue it here - akpm */
311 struct tq_struct SAK_tq;
314 /* tty magic number */
315 #define TTY_MAGIC 0x5401
318 * These bits are used in the flags field of the tty structure.
320 * So that interrupts won't be able to mess up the queues,
321 * copy_to_cooked must be atomic with respect to itself, as must
322 * tty->write. Thus, you must use the inline functions set_bit() and
323 * clear_bit() to make things atomic.
325 #define TTY_THROTTLED 0
326 #define TTY_IO_ERROR 1
327 #define TTY_OTHER_CLOSED 2
328 #define TTY_EXCLUSIVE 3
330 #define TTY_DO_WRITE_WAKEUP 5
332 #define TTY_CLOSING 7
333 #define TTY_DONT_FLIP 8
334 #define TTY_HW_COOK_OUT 14
335 #define TTY_HW_COOK_IN 15
336 #define TTY_PTY_LOCK 16
337 #define TTY_NO_WRITE_SPLIT 17
339 #define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
341 extern void tty_write_flush(struct tty_struct *);
343 extern struct termios tty_std_termios;
344 extern struct tty_struct * redirect;
345 extern struct tty_ldisc ldiscs[];
346 extern int fg_console, last_console, want_console;
348 extern int kmsg_redirect;
350 extern void con_init(void);
351 extern void console_init(void);
353 extern int lp_init(void);
354 extern int pty_init(void);
355 extern void tty_init(void);
356 extern int mxser_init(void);
357 extern int moxa_init(void);
358 extern int ip2_init(void);
359 extern int pcxe_init(void);
360 extern int pc_init(void);
361 extern int vcs_init(void);
362 extern int rp_init(void);
363 extern int cy_init(void);
364 extern int stl_init(void);
365 extern int stli_init(void);
366 extern int specialix_init(void);
367 extern int espserial_init(void);
368 extern int macserial_init(void);
369 extern int a2232board_init(void);
371 extern int tty_paranoia_check(struct tty_struct *tty, kdev_t device,
372 const char *routine);
373 extern char *tty_name(struct tty_struct *tty, char *buf);
374 extern void tty_wait_until_sent(struct tty_struct * tty, long timeout);
375 extern int tty_check_change(struct tty_struct * tty);
376 extern void stop_tty(struct tty_struct * tty);
377 extern void start_tty(struct tty_struct * tty);
378 extern int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc);
379 extern int tty_register_driver(struct tty_driver *driver);
380 extern int tty_unregister_driver(struct tty_driver *driver);
381 extern void tty_register_devfs (struct tty_driver *driver, unsigned int flags,
383 extern void tty_unregister_devfs (struct tty_driver *driver, unsigned minor);
384 extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
386 extern void tty_write_message(struct tty_struct *tty, char *msg);
388 extern int is_orphaned_pgrp(int pgrp);
389 extern int is_ignored(int sig);
390 extern int tty_signal(int sig, struct tty_struct *tty);
391 extern void tty_hangup(struct tty_struct * tty);
392 extern void tty_vhangup(struct tty_struct * tty);
393 extern void tty_unhangup(struct file *filp);
394 extern int tty_hung_up_p(struct file * filp);
395 extern void do_SAK(struct tty_struct *tty);
396 extern void disassociate_ctty(int priv);
397 extern void tty_flip_buffer_push(struct tty_struct *tty);
398 extern int tty_get_baud_rate(struct tty_struct *tty);
401 extern struct tty_ldisc tty_ldisc_N_TTY;
404 extern int n_tty_ioctl(struct tty_struct * tty, struct file * file,
405 unsigned int cmd, unsigned long arg);
409 extern void serial_console_init(void);
413 extern int pcxe_open(struct tty_struct *tty, struct file *filp);
417 extern void console_print(const char *);
421 extern int vt_ioctl(struct tty_struct *tty, struct file * file,
422 unsigned int cmd, unsigned long arg);
424 #endif /* __KERNEL__ */