12 use HTML::Template::Pro;
14 use PDF::Reuse::Barcode;
21 my $htdocs_path = C4::Context->config('intrahtdocs');
23 print $cgi->header( -type => 'application/pdf', -attachment => 'barcode.pdf' );
27 # get the printing settings
28 my $template = GetActiveLabelTemplate();
29 my $conf_data = get_label_options();
30 my $profile = GetAssociatedProfile($template->{'tmpl_id'});
32 my $batch_id = $cgi->param('batch_id');
35 my $batch_type = $conf_data->{'type'};
36 my $barcodetype = $conf_data->{'barcodetype'};
37 my $printingtype = $conf_data->{'printingtype'};
38 my $guidebox = $conf_data->{'guidebox'};
39 my $start_label = $conf_data->{'startlabel'};
40 if ($cgi->param('startlabel')) {
41 $start_label = $cgi->param('startlabel'); # A bit of a hack to allow setting the starting label from the address bar... -fbcit
43 warn "Starting on label #$start_label" if $DEBUG;
44 my $units = $template->{'units'};
46 if ($printingtype eq 'PATCRD') {
47 @resultsloop = GetPatronCardItems($batch_id);
49 @resultsloop = GetLabelItems($batch_id);
53 #warn "fontsize = $fontsize";
54 #warn Dumper $template;
56 my $unitvalue = GetUnitsValue($units);
57 my $prof_unitvalue = GetUnitsValue($profile->{'unit'});
59 warn "Template units: $units which converts to $unitvalue PostScript Points" if $DEBUG;
60 warn "Profile units: $profile->{'unit'} which converts to $prof_unitvalue PostScript Points" if $DEBUG;
62 my $tmpl_code = $template->{'tmpl_code'};
63 my $tmpl_desc = $template->{'tmpl_desc'};
65 my $page_height = ( $template->{'page_height'} * $unitvalue );
66 my $page_width = ( $template->{'page_width'} * $unitvalue );
67 my $label_height = ( $template->{'label_height'} * $unitvalue );
68 my $label_width = ( $template->{'label_width'} * $unitvalue );
69 my $spine_width = ( $template->{'label_width'} * $unitvalue );
70 my $circ_width = ( $template->{'label_width'} * $unitvalue );
71 my $top_margin = ( $template->{'topmargin'} * $unitvalue );
72 my $left_margin = ( $template->{'leftmargin'} * $unitvalue );
73 my $colspace = ( $template->{'colgap'} * $unitvalue );
74 my $rowspace = ( $template->{'rowgap'} * $unitvalue );
76 warn "Converted dimensions are:" if $DEBUG;
77 warn "pghth=$page_height, pgwth=$page_width, lblhth=$label_height, lblwth=$label_width, spinwth=$spine_width, circwth=$circ_width, tpmar=$top_margin, lmar=$left_margin, colsp=$colspace, rowsp=$rowspace" if $DEBUG;
79 my $label_cols = $template->{'cols'};
80 my $label_rows = $template->{'rows'};
82 my $margin = $top_margin;
83 my $left_text_margin = 3; # FIXME: This value should not be hardcoded
90 # Some peritent notes from PDF::Reuse regarding prFont()...
91 # If a font wasn't found, Helvetica will be set.
92 # These names are always recognized: Times-Roman, Times-Bold, Times-Italic, Times-BoldItalic, Courier, Courier-Bold,
93 # Courier-Oblique, Courier-BoldOblique, Helvetica, Helvetica-Bold, Helvetica-Oblique, Helvetica-BoldOblique
94 # They can be abbreviated: TR, TB, TI, TBI, C, CB, CO, CBO, H, HB, HO, HBO
96 my $fontsize = $template->{'fontsize'};
97 my $fontname = $template->{'font'};
99 my $text_wrap_cols = GetTextWrapCols( $fontname, $fontsize, $label_width, $left_text_margin );
101 #warn $label_cols, $label_rows;
106 my $upperRightX = $page_width;
107 my $upperRightY = $page_height;
109 warn "Active profile: " . ($profile->{prof_id} || "None") if $DEBUG;
111 #### PRINT PRELIMINARY DATA ####
112 print $cgi->header( -type => 'application/pdf', -attachment => 'barcode.pdf' );
113 # Don't print header until very last possible moment
114 # That way if error or die occurs, fatals_to_browser will still work.
115 # After we print this header, there is no way back to HTML. All we can do is deliver PDF.
118 prFile(); # No args means to STDOUT
119 prCompress(1); # turn on zip compression which dramatically reduces file size
120 prMbox( $lowerLeftX, $lowerLeftY, $upperRightX, $upperRightY );
122 my $codetype; # = 'Code39';
125 # drawbox( $lowerLeftX, $lowerLeftY, $upperRightX, $upperRightY );
127 # draw margin box for alignment page
128 drawbox( ($left_margin), ($top_margin), ($page_width-(2*$left_margin)), ($page_height-(2*$top_margin)) ) if $DEBUG_LPT;
130 # Adjustments for image position and creep -fbcit
131 # NOTE: *All* of these factor in to image position and creep. Keep this in mind when makeing adjustments.
132 # Suggested proceedure: Adjust margins until both top and left margins are correct. Then adjust the label
133 # height and width to correct label creep across and down page. Units are PostScript Points (72 per inch).
135 warn "Active profile: " . ($profile->{'prof_id'}?$profile->{'prof_id'}:"None") if $DEBUG;
138 warn "-------------------------INITIAL VALUES-----------------------------";
139 warn "top margin = $top_margin points\n";
140 warn "left margin = $left_margin points\n";
141 warn "label height = $label_height points\n";
142 warn "label width = $label_width points\n";
145 if ( $profile->{'prof_id'} ) {
146 $top_margin = $top_margin + ($profile->{'offset_vert'} * $prof_unitvalue); # controls vertical offset
147 $label_height = $label_height + ($profile->{'creep_vert'} * $prof_unitvalue); # controls vertical creep
148 $left_margin = $left_margin + ($profile->{'offset_horz'} * $prof_unitvalue); # controls horizontal offset
149 $label_width = $label_width + ($profile->{'creep_horz'} * $prof_unitvalue); # controls horizontal creep
152 if ( $DEBUG && $profile->{'prof_id'} ) {
153 warn "-------------------------ADJUSTED VALUES-----------------------------";
154 warn "top margin = $top_margin points\n";
155 warn "left margin = $left_margin points\n";
156 warn "label height = $label_height points\n";
157 warn "label width = $label_width points\n";
159 warn "No profile associated so no adjustment applied.";
162 my ( $i, $i2 ); # loop counters
164 #warn " $lowerLeftX, $lowerLeftY, $upperRightX, $upperRightY";
165 #warn "$label_rows, $label_cols\n";
166 #warn "$label_height, $label_width\n";
167 #warn "$page_height, $page_width\n";
169 my ( $rowcount, $colcount, $x_pos, $y_pos, $rowtemp, $coltemp );
171 if ( $start_label eq 1 ) {
174 $x_pos = $left_margin;
175 $y_pos = ( $page_height - $top_margin - $label_height );
179 $rowcount = ceil( $start_label / $label_cols );
180 $colcount = ( $start_label - ( ( $rowcount - 1 ) * $label_cols ) );
181 $x_pos = $left_margin + ( $label_width * ( $colcount - 1 ) ) +
182 ( $colspace * ( $colcount - 1 ) );
183 $y_pos = $page_height - $top_margin - ( $label_height * $rowcount ) -
184 ( $rowspace * ( $rowcount - 1 ) );
185 warn "Start label specified: $start_label Beginning in row $rowcount, column $colcount" if $DEBUG;
186 warn "X position = $x_pos Y position = $y_pos" if $DEBUG;
187 warn "Rowspace = $rowspace Label height = $label_height" if $DEBUG;
194 foreach my $item (@resultsloop) {
195 warn "Label parameters: xpos=$x_pos, ypos=$y_pos, lblwid=$label_width, lblhig=$label_height" if $DEBUG;
196 if ( $printingtype eq 'BAR' ) {
197 drawbox( $x_pos, $y_pos, $label_width, $label_height ) if $guidebox;
198 DrawBarcode( $x_pos, $y_pos, $label_height, $label_width, $item->{'barcode'},
202 elsif ( $printingtype eq 'BARBIB' ) {
203 drawbox( $x_pos, $y_pos, $label_width, $label_height ) if $guidebox;
205 # reposoitioning barcode up the top of label
206 my $barcode_height = ($label_height / 1.5 ); ## scaling voodoo
207 my $text_height = $label_height / 2;
208 my $barcode_y = $y_pos + ( $label_height / 2.5 ); ## scaling voodoo
210 DrawBarcode( $x_pos, $barcode_y, $barcode_height, $label_width,
211 $item->{'barcode'}, $barcodetype );
212 DrawSpineText( $x_pos, $y_pos, $label_height, $label_width, $fontname, $fontsize,
213 $left_text_margin, $text_wrap_cols, \$item, \$conf_data, $printingtype );
218 elsif ( $printingtype eq 'BIBBAR' ) {
219 drawbox( $x_pos, $y_pos, $label_width, $label_height ) if $guidebox;
220 my $barcode_height = $label_height / 2;
221 DrawBarcode( $x_pos, $y_pos, $barcode_height, $label_width, $item->{'barcode'},
223 DrawSpineText( $x_pos, $y_pos, $label_height, $label_width, $fontname, $fontsize,
224 $left_text_margin, $text_wrap_cols, \$item, \$conf_data, $printingtype );
229 elsif ( $printingtype eq 'ALT' ) {
230 drawbox( $x_pos, $y_pos, $label_width, $label_height ) if $guidebox;
231 DrawBarcode( $x_pos, $y_pos, $label_height, $label_width, $item->{'barcode'},
234 drawbox( $x_pos, $y_pos, $label_width, $label_height ) if $guidebox;
235 DrawSpineText( $x_pos, $y_pos, $label_height, $label_width, $fontname, $fontsize,
236 $left_text_margin, $text_wrap_cols, \$item, \$conf_data, $printingtype );
242 elsif ( $printingtype eq 'BIB' ) {
243 drawbox( $x_pos, $y_pos, $label_width, $label_height ) if $guidebox;
244 DrawSpineText( $x_pos, $y_pos, $label_height, $label_width, $fontname, $fontsize,
245 $left_text_margin, $text_wrap_cols, \$item, \$conf_data, $printingtype );
249 elsif ( $printingtype eq 'PATCRD' ) {
250 my $patron_data = $item;
252 #FIXME: This needs to be paramatized and passed in from the user...
253 #Each element of this hash is a separate line on the patron card. Keys are the text to print and the associated data is the point size.
255 $patron_data->{'description'} => $fontsize,
256 $patron_data->{'branchname'} => ($fontsize + 3),
259 $DEBUG and warn "Generating patron card for cardnumber $patron_data->{'cardnumber'}";
261 drawbox( $x_pos, $y_pos, $label_width, $label_height ) if $guidebox;
262 my $barcode_height = $label_height / 2.75; #FIXME: Scaling barcode height; this needs to be a user parameter.
263 DrawBarcode( $x_pos, $y_pos, $barcode_height, $label_width, $patron_data->{'cardnumber'},
265 DrawPatronCardText( $x_pos, $y_pos, $label_height, $label_width, $fontname, $fontsize,
266 $left_text_margin, $text_wrap_cols, $text, $printingtype );
269 } # end for item loop
272 sub CalcNextLabelPos {
273 if ( $colcount lt $label_cols ) {
276 $x_pos = ( $x_pos + $label_width + $colspace );
281 $x_pos = $left_margin;
282 if ( $rowcount eq $label_rows ) {
286 $y_pos = ( $page_height - $top_margin - $label_height );
292 $y_pos = ( $y_pos - $rowspace - $label_height );