git.rot13.org Git - webpac2/blob - run.pl

   1 #!/usr/bin/perl -w
   2
   3 use strict;
   4
   5 use Cwd qw/abs_path/;
   6 use File::Temp qw/tempdir/;
   7 use Data::Dumper;
   8 use lib './lib';
   9
  10 use WebPAC::Common 0.02;
  11 use WebPAC::Lookup;
  12 use WebPAC::Input 0.03;
  13 use WebPAC::Store 0.03;
  14 use WebPAC::Normalize::XML;
  15 use WebPAC::Normalize::Set;
  16 use WebPAC::Output::TT;
  17 use WebPAC::Validate;
  18 use YAML qw/LoadFile/;
  19 use Getopt::Long;
  20 use File::Path;
  21 use Time::HiRes qw/time/;
  22 use File::Slurp;
  23
  24 =head1 NAME
  25
  26 run.pl - start WebPAC indexing
  27
  28 B<this command will probably go away. Don't get used to it!>
  29
  30 Options:
  31
  32 =over 4
  33
  34 =item --offset 42
  35
  36 start loading (all) databases at offset 42
  37
  38 =item --limit 100
  39
  40 limit loading to 100 records
  41
  42 =item --clean
  43
  44 remove database and Hyper Estraier index before indexing
  45
  46 =item --only=database_name/input_filter
  47
  48 reindex just single database (legacy name is --one)
  49
  50 C</input_filter> is optional part which can be C<name>
  51 or C<type> from input
  52
  53 =item --config conf/config.yml
  54
  55 path to YAML configuration file
  56
  57 =item --force-set
  58
  59 force conversion C<< normalize->path >> in C<config.yml> from
  60 C<.xml> to C<.pl>
  61
  62 =item --stats
  63
  64 disable indexing and dump statistics about field and subfield
  65 usage for each input
  66
  67 =item --validate path/to/validation_file
  68
  69 turn on extra validation of imput records, see L<WebPAC::Validation>
  70
  71 =back
  72
  73 =cut
  74
  75 my $offset;
  76 my $limit;
  77
  78 my $clean = 0;
  79 my $config = 'conf/config.yml';
  80 my $debug = 0;
  81 my $only_filter;
  82 my $force_set = 0;
  83 my $stats = 0;
  84 my $validate_path;
  85
  86 GetOptions(
  87         "limit=i" => \$limit,
  88         "offset=i" => \$offset,
  89         "clean" => \$clean,
  90         "one=s" => \$only_filter,
  91         "only=s" => \$only_filter,
  92         "config" => \$config,
  93         "debug" => \$debug,
  94         "force-set" => \$force_set,
  95         "stats" => \$stats,
  96         "validate=s" => \$validate_path,
  97 );
  98
  99 $config = LoadFile($config);
 100
 101 print "config = ",Dumper($config) if ($debug);
 102
 103 die "no databases in config file!\n" unless ($config->{databases});
 104
 105 my $log = _new WebPAC::Common()->_get_logger();
 106 $log->info( "-" x 79 );
 107
 108 my $validate;
 109 $validate = new WebPAC::Validate(
 110         path => $validate_path,
 111 ) if ($validate_path);
 112
 113 my $use_indexer = $config->{use_indexer} || 'hyperestraier';
 114 if ($stats) {
 115         $log->debug("option --stats disables update of indexing engine...");
 116         $use_indexer = undef;
 117 } else {
 118         $log->info("using $use_indexer indexing engine...");
 119 }
 120
 121 my $total_rows = 0;
 122 my $start_t = time();
 123
 124 while (my ($database, $db_config) = each %{ $config->{databases} }) {
 125
 126         my ($only_database,$only_input) = split(m#/#, $only_filter) if ($only_filter);
 127         next if ($only_database && $database !~ m/$only_database/i);
 128
 129         my $indexer;
 130
 131         if ($use_indexer) {
 132                 my $indexer_config = $config->{$use_indexer} || $log->logdie("can't find '$use_indexer' part in confguration");
 133                 $indexer_config->{database} = $database;
 134                 $indexer_config->{clean} = $clean;
 135                 $indexer_config->{label} = $db_config->{name};
 136
 137                 if ($use_indexer eq 'hyperestraier') {
 138
 139                         # open Hyper Estraier database
 140                         use WebPAC::Output::Estraier '0.10';
 141                         $indexer = new WebPAC::Output::Estraier( %{ $indexer_config } );
 142
 143                 } elsif ($use_indexer eq 'kinosearch') {
 144
 145                         # open KinoSearch
 146                         use WebPAC::Output::KinoSearch;
 147                         $indexer_config->{clean} = 1 unless (-e $indexer_config->{index_path});
 148                         $indexer = new WebPAC::Output::KinoSearch( %{ $indexer_config } );
 149
 150                 } else {
 151                         $log->logdie("unknown use_indexer: $use_indexer");
 152                 }
 153
 154                 $log->logide("can't continue without valid indexer") unless ($indexer);
 155         }
 156
 157
 158         #
 159         # now WebPAC::Store
 160         #
 161         my $abs_path = abs_path($0);
 162         $abs_path =~ s#/[^/]*$#/#;
 163
 164         my $db_path = $config->{webpac}->{db_path} . '/' . $database;
 165
 166         if ($clean) {
 167                 $log->info("creating new database '$database' in $db_path");
 168                 rmtree( $db_path ) || $log->warn("can't remove $db_path: $!");
 169         } else {
 170                 $log->info("working on database '$database' in $db_path");
 171         }
 172
 173         my $db = new WebPAC::Store(
 174                 path => $db_path,
 175                 database => $database,
 176                 debug => $debug,
 177         );
 178
 179
 180         #
 181         # now, iterate through input formats
 182         #
 183
 184         my @inputs;
 185         if (ref($db_config->{input}) eq 'ARRAY') {
 186                 @inputs = @{ $db_config->{input} };
 187         } elsif ($db_config->{input}) {
 188                 push @inputs, $db_config->{input};
 189         } else {
 190                 $log->info("database $database doesn't have inputs defined");
 191         }
 192
 193         my @supported_inputs = keys %{ $config->{webpac}->{inputs} };
 194
 195         foreach my $input (@inputs) {
 196
 197                 next if ($only_input && ($input->{name} !~ m#$only_input#i && $input->{type} !~ m#$only_input#i));
 198
 199                 my $type = lc($input->{type});
 200
 201                 die "I know only how to handle input types ", join(",", @supported_inputs), " not '$type'!\n" unless (grep(/$type/, @supported_inputs));
 202
 203                 my $lookup = new WebPAC::Lookup(
 204                         lookup_file => $input->{lookup},
 205                 ) if ($input->{lookup});
 206
 207                 my $input_module = $config->{webpac}->{inputs}->{$type};
 208
 209                 $log->info("working on input '$input->{name}' in $input->{path} [type: $input->{type}] using $input_module",
 210                         $input->{lookup} ? "lookup '$input->{lookup}'" : ""
 211                 );
 212
 213                 my $input_db = new WebPAC::Input(
 214                         module => $input_module,
 215                         code_page => $config->{webpac}->{webpac_encoding},
 216                         limit => $limit || $input->{limit},
 217                         offset => $offset,
 218                         lookup => $lookup,
 219                         recode => $input->{recode},
 220                         stats => $stats,
 221                 );
 222                 $log->logdie("can't create input using $input_module") unless ($input);
 223
 224                 my $maxmfn = $input_db->open(
 225                         path => $input->{path},
 226                         code_page => $input->{encoding},        # database encoding
 227                         %{ $input },
 228                 );
 229
 230                 my $n = new WebPAC::Normalize::XML(
 231                 #       filter => { 'foo' => sub { shift } },
 232                         db => $db,
 233                         lookup_regex => $lookup ? $lookup->regex : undef,
 234                         lookup => $lookup,
 235                         prefix => $input->{name},
 236                 );
 237
 238                 my $rules;
 239                 my $normalize_path = $input->{normalize}->{path};
 240
 241                 if ($force_set) {
 242                         my $new_norm_path = $normalize_path;
 243                         $new_norm_path =~ s/\.xml$/.pl/;
 244                         if (-e $new_norm_path) {
 245                                 $log->debug("--force-set replaced $normalize_path with $new_norm_path");
 246                                 $normalize_path = $new_norm_path;
 247                         } else {
 248                                 $log->debug("--force-set failed on $new_norm_path, fallback to $normalize_path");
 249                         }
 250                 }
 251
 252                 if ($normalize_path =~ m/\.xml$/i) {
 253                         $n->open(
 254                                 tag => $input->{normalize}->{tag},
 255                                 xml_file => $normalize_path,
 256                         );
 257                 } elsif ($normalize_path =~ m/\.(?:yml|yaml)$/i) {
 258                         $n->open_yaml(
 259                                 path => $normalize_path,
 260                                 tag => $input->{normalize}->{tag},
 261                         );
 262                 } elsif ($normalize_path =~ m/\.(?:pl)$/i) {
 263                         $n = undef;
 264                         $log->info("using WebPAC::Normalize::Set to process $normalize_path");
 265                         $rules = read_file( $normalize_path ) or die "can't open $normalize_path: $!";
 266                 }
 267
 268                 foreach my $pos ( 0 ... $input_db->size ) {
 269
 270                         my $row = $input_db->fetch || next;
 271
 272                         my $mfn = $row->{'000'}->[0];
 273
 274                         if (! $mfn || $mfn !~ m#^\d+$#) {
 275                                 $log->warn("record $pos doesn't have valid MFN but '$mfn', using $pos");
 276                                 $mfn = $pos;
 277                                 push @{ $row->{'000'} }, $pos;
 278                         }
 279
 280
 281                         if ($validate) {
 282                                 my @errors = $validate->validate_errors( $row );
 283                                 $log->error( "MFN $mfn validation errors:\n", join("\n", @errors) ) if (@errors);
 284                         }
 285
 286
 287                         my $ds;
 288                         if ($n) {
 289                                 $ds = $n->data_structure($row);
 290                         } else {
 291                                 $ds = WebPAC::Normalize::Set::data_structure(
 292                                         row => $row,
 293                                         rules => $rules,
 294                                         lookup => $lookup ? $lookup->lookup_hash : undef,
 295                                 );
 296
 297                                 $db->save_ds(
 298                                         id => $mfn,
 299                                         ds => $ds,
 300                                         prefix => $input->{name},
 301                                 ) if ($ds && !$stats);
 302                         }
 303
 304                         $indexer->add(
 305                                 id => $input->{name} . "/" . $mfn,
 306                                 ds => $ds,
 307                                 type => $config->{$use_indexer}->{type},
 308                         ) if ($indexer);
 309
 310                         $total_rows++;
 311                 }
 312
 313                 $log->info("statistics of fields usage:\n", $input_db->stats) if ($stats);
 314
 315         };
 316
 317         eval { $indexer->finish } if ($indexer && $indexer->can('finish'));
 318
 319         my $dt = time() - $start_t;
 320         $log->info("$total_rows records ", $indexer ? "indexed " : "",
 321                 sprintf("in %.2f sec [%.2f rec/sec]",
 322                         $dt, ($total_rows / $dt)
 323                 )
 324         );
 325
 326         #
 327         # add Hyper Estraier links to other databases
 328         #
 329         if (ref($db_config->{links}) eq 'ARRAY') {
 330                 foreach my $link (@{ $db_config->{links} }) {
 331                         if ($use_indexer eq 'hyperestraier') {
 332                                 $log->info("adding link $database -> $link->{to} [$link->{credit}]");
 333                                 $indexer->add_link(
 334                                         from => $database,
 335                                         to => $link->{to},
 336                                         credit => $link->{credit},
 337                                 );
 338                         } else {
 339                                 $log->warn("NOT IMPLEMENTED WITH $use_indexer: adding link $database -> $link->{to} [$link->{credit}]");
 340                         }
 341                 }
 342         }
 343
 344 }
 345