remove double oo

[GroveSensor] / GrooveSensor.ino

diff --git a/GrooveSensor.ino b/GrooveSensor.ino
deleted file mode 100644 (file)
index 204553a..0000000
--- a/GrooveSensor.ino
+++ /dev/null
@@ -1,96 +0,0 @@
-#include <Arduino.h>
-#include <U8x8lib.h>
-
-#include "DHT.h"
-
-#include <Adafruit_BMP280.h>
-
-U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(/* reset=*/ U8X8_PIN_NONE);
-
-// U8X8_SSD1306_128X64_NONAME_SW_I2C u8x8(/* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);   // OLEDs without Reset of the Display
- 
-
-#define DHTPIN 3     // what pin we're connected to
-#define DHTTYPE DHT11   // DHT 11 
-
-DHT dht(DHTPIN, DHTTYPE);
-
-
-Adafruit_BMP280 bmp; // I2C
-
-
-#define BUTTON_PIN 6 
- 
-void setup(void) {
-  //u8x8.setBusClock(100000);  // If you breakout other modules, please enable this line
-  u8x8.begin();
-  u8x8.setPowerSave(0);
-  u8x8.setFlipMode(1);
-
-  Serial.begin(115200);
-
-  dht.begin();
-
-  if (!bmp.begin()) {
-    Serial.println(F("Could not find a valid BMP280 sensor!"));
-  }
-
-  /* Default settings from datasheet. */
-  bmp.setSampling(Adafruit_BMP280::MODE_NORMAL,     /* Operating Mode. */
-                  Adafruit_BMP280::SAMPLING_X2,     /* Temp. oversampling */
-                  Adafruit_BMP280::SAMPLING_X16,    /* Pressure oversampling */
-                  Adafruit_BMP280::FILTER_X16,      /* Filtering. */
-                  Adafruit_BMP280::STANDBY_MS_500); /* Standby time. */
-
-  pinMode(BUTTON_PIN, OUTPUT);
-
-}
-
-unsigned long button_timeout;
- 
-void loop(void) {
-
-  int oled_active = ! digitalRead(BUTTON_PIN);
-  u8x8.setPowerSave( oled_active );
-
-  float temp, humi;
-  temp = dht.readTemperature();
-  humi = dht.readHumidity();
-
-  u8x8.setFont(u8x8_font_chroma48medium8_r);
-  u8x8.setCursor(0, 0);
-  //u8x8.print("Temp:");
-  u8x8.print(temp);
-  u8x8.print("C ");
-  Serial.print("dht_temp=");
-  Serial.print(temp);
-
-  temp = bmp.readTemperature();
-  u8x8.print( temp );
-  Serial.print(",bmp_temp=");
-  Serial.print(temp);
-
-  u8x8.print(" ");
-
-  u8x8.setCursor(0,9);
-  u8x8.print("Humidity:");
-  u8x8.print(humi);
-  u8x8.print("%");
-  Serial.print(",dht_humidity=");
-  Serial.print(humi);
-
-  float pressure;
-  pressure = bmp.readPressure();
-
-  u8x8.setCursor(0,18);
-  u8x8.print( pressure );
-  Serial.print(",bmp_pressure=");
-  Serial.print(pressure);
-
-  Serial.println();
-
-  u8x8.refreshDisplay();
-  delay(1000);
-
-}
-