# Current maintainer MJR http://mjr.towers.org.uk/
# See http://www.koha.org/wiki/?page=KohaInstaller
#
-# 2007-11-05 Corrected CGI copy to include entire 'installer' subdir structure. -fbcit
+
+use strict;
+use warnings;
use ExtUtils::MakeMaker;
use POSIX;
+use File::Spec;
+use Getopt::Long;
+my $DEBUG = 0;
die "perl 5.6.1 or later required" unless ($] >= 5.006001);
+# Hash up directory structure & files beginning with the directory we were called from (should be the base of koha)...
+
+my $dirtree = hashdir('.');
+my %result = ();
+
=head1 NAME
Makefile.PL - Koha packager and installer
=head2 BASIC INSTALLATION
- perl Makefile.PL
- or perl Makefile.PL INSTALL_BASE=/path/to/your/home/dir MARCFLAVOUR=marc21 LANGUAGE=en
- make
- sudo make install
+ perl Makefile.PL
+ make
+ make test
+ sudo make install
+
+=head2 UPGRADE INSTALLATION
+
+ NOTE: This option is only available if koha-install-log exists.
+
+ perl Makefile.PL --prev-install-log /path/to/koha-install-log
+
+ make
+ make test
+ sudo make upgrade
=head2 PACKAGING RELEASE TARBALLS
- make manifest tardist
- make manifest zipdist
+ make manifest tardist
+ make manifest zipdist
=head2 CLEANING UP
Hash of file mappings
-=head2 CONFIGURE
-
-Maybe use prompt() here in future to get configuration values
-interactively at installation time.
-
=head2 PL_FILES
This is a hash of PL scripts to run after installation and
=cut
-my $marc_value;
-my $lang_value;
+=head2 target_map
+
+This is a hash mapping directories and files in the
+source tree to installation target directories. The rules
+for this mapping are:
+
+=over 4
+
+=item If a directory or file is specified, it and its
+contents will be copied to the installation target directory.
+
+=item If a subdirectory of a mapped directory is specified,
+its target overrides the parent's target for that subdirectory.
+
+=item The value of each map entry may either be a scalar containing
+one target or a reference to a hash containing 'target' and 'trimdir'
+keys.
+
+=item Any files at the top level of the source tree that are
+not included in the map will not be installed.
+
+=item Any directories at the top level of the source tree
+that are not included in the map will be installed in
+INTRANET_CGI_DIR. This is a sensible default given the
+current organization of the source tree, but (FIXME) it
+would be better to reorganize the source tree to better
+match the installation system, to allow adding new directories
+without having to adjust Makefile.PL each time. The idea
+is to make the C<$target_map> hash as minimal as possible.
+
+=back
+
+The permitted installation targets are:
+
+=over 4
+
+=item INTRANET_CGI_DIR
+
+CGI scripts for intranet (staff) interface.
+
+=item INTRANET_TMPL_DIR
+
+HTML templates for the intranet interface.
+
+=item INTRANET_WWW_DIR
+
+HTML files, images, etc. for DocumentRoot for the intranet interface.
+
+=item OPAC_CGI_DIR
+
+CGI scripts for OPAC (public) interface.
+
+=item OPAC_TMPL_DIR
+
+HTML templates for the OPAC interface.
+
+=item OPAC_WWW_DIR
+
+HTML files, images, etc. for DocumentRoot for the OPAC interface.
+
+=item PERL_MODULE_DIR
+
+Perl modules (at present just the C4 modules) that are intimately
+tied to Koha. Depending on the installation options, these
+may or may not be installed one of the standard directories
+in Perl's default @LIB.
+
+=item KOHA_CONF_DIR
+
+Directory for Koha configuration files.
+
+=item ZEBRA_CONF_DIR
+
+Directory for Zebra configuration files.
+
+=item ZEBRA_LOCK_DIR
+
+Directory for Zebra's lock files.
+
+=item ZEBRA_DATA_DIR
+
+Directory for Zebra's data files.
+
+=item ZEBRA_RUN_DIR
+
+Directory for Zebra's UNIX-domain sockets.
+
+=item MISC_DIR
+
+Directory for for miscellaenous scripts, among other
+things the translation toolkit and RSS feed tools.
+
+=item SCRIPT_DIR
+
+Directory for command-line scripts and daemons to
+be set up all for installation modes.
+
+=item SCRIPT_NONDEV_DIR
+
+Directory for command-line scripts that should
+be installed in the same directory as the
+SCRIPT_DIR target except 'dev' installs.
+
+=item MAN_DIR
+
+Directory for man pages created from POD -- will mostly
+contain information of interest to Koha developers.
+
+=item DOC_DIR
+
+Directory for Koha documentation accessed from the
+command-line, e.g., READMEs.
+
+=item LOG_DIR
+
+Directory for Apache and Zebra logs produced by Koha.
+
+=item PAZPAR2_CONF_DIR
+
+Directory for PazPar2 configuration files.
+
+=item NONE
+
+This is a dummy target used to explicitly state
+that a given file or directory is not to be installed.
+This is used either for parts of the installer itself
+or for development tools that are not applicable to a
+production installation.
+
+=back
+
+=cut
+
+my $target_map = {
+ './about.pl' => 'INTRANET_CGI_DIR',
+ './acqui' => 'INTRANET_CGI_DIR',
+ './admin' => 'INTRANET_CGI_DIR',
+ './authorities' => 'INTRANET_CGI_DIR',
+ './C4' => 'PERL_MODULE_DIR',
+ './C4/SIP/t' => 'NONE',
+ './C4/SIP/koha_test' => 'NONE',
+ './C4/tests' => 'NONE',
+ './catalogue' => 'INTRANET_CGI_DIR',
+ './cataloguing' => 'INTRANET_CGI_DIR',
+ './changelanguage.pl' => 'INTRANET_CGI_DIR',
+ './check_sysprefs.pl' => 'NONE',
+ './circ' => 'INTRANET_CGI_DIR',
+ './offline_circ' => 'INTRANET_CGI_DIR',
+ './edithelp.pl' => 'INTRANET_CGI_DIR',
+ './etc' => { target => 'KOHA_CONF_DIR', trimdir => -1 },
+ './etc/zebradb' => { target => 'ZEBRA_CONF_DIR', trimdir => -1 },
+ './etc/pazpar2' => { target => 'PAZPAR2_CONF_DIR', trimdir => -1 },
+ './help.pl' => 'INTRANET_CGI_DIR',
+ './installer-CPAN.pl' => 'NONE',
+ './installer' => 'INTRANET_CGI_DIR',
+ './errors' => {target => 'INTRANET_CGI_DIR'},
+ './koha-tmpl/intranet-tmpl' => {target => 'INTRANET_TMPL_DIR', trimdir => -1},
+ './koha-tmpl/opac-tmpl' => {target => 'OPAC_TMPL_DIR', trimdir => -1},
+ './kohaversion.pl' => 'INTRANET_CGI_DIR',
+ './labels' => 'INTRANET_CGI_DIR',
+ './mainpage.pl' => 'INTRANET_CGI_DIR',
+ './Makefile.PL' => 'NONE',
+ './MANIFEST.SKIP' => 'NONE',
+ './members' => 'INTRANET_CGI_DIR',
+ './misc' => { target => 'SCRIPT_NONDEV_DIR', trimdir => -1 },
+ './misc/bin' => { target => 'SCRIPT_DIR', trimdir => -1 },
+ './misc/release_notes' => { target => 'DOC_DIR', trimdir => 2 },
+ './misc/translator' => { target => 'MISC_DIR', trimdir => 2 },
+ './misc/koha-install-log' => { target => 'MISC_DIR', trimdir => -1 },
+ './misc/installer_devel_notes' => 'NONE',
+ './opac' => 'OPAC_CGI_DIR',
+ './README.txt' => 'NONE',
+ './reports' => 'INTRANET_CGI_DIR',
+ './reserve' => 'INTRANET_CGI_DIR',
+ './reviews' => 'INTRANET_CGI_DIR',
+ './rewrite-config.PL' => 'NONE',
+ './reviews' => 'INTRANET_CGI_DIR',
+ './serials' => 'INTRANET_CGI_DIR',
+ './skel' => 'NONE',
+ './skel/var/log/koha' => { target => 'LOG_DIR', trimdir => -1 },
+ './skel/var/run/koha/zebradb' => { target => 'ZEBRA_RUN_DIR', trimdir => -1 },
+ './skel/var/lock/koha/zebradb/authorities' => { target => 'ZEBRA_LOCK_DIR', trimdir => 6 },
+ './skel/var/lib/koha/zebradb/authorities/key' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
+ './skel/var/lib/koha/zebradb/authorities/register' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
+ './skel/var/lib/koha/zebradb/authorities/shadow' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
+ './skel/var/lib/koha/zebradb/authorities/tmp' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
+ './skel/var/lock/koha/zebradb/biblios' => { target => 'ZEBRA_LOCK_DIR', trimdir => 6 },
+ './skel/var/lib/koha/zebradb/biblios/key' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
+ './skel/var/lib/koha/zebradb/biblios/register' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
+ './skel/var/lib/koha/zebradb/biblios/shadow' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
+ './skel/var/lib/koha/zebradb/biblios/tmp' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
+ './sms' => 'INTRANET_CGI_DIR',
+ './suggestion' => 'INTRANET_CGI_DIR',
+ './svc' => 'INTRANET_CGI_DIR',
+ './t' => 'NONE',
+ './tags' => 'INTRANET_CGI_DIR',
+ './tmp' => 'NONE', # FIXME need to determine whether
+ # Koha generates any persistent temp files
+ # that should go in /var/tmp/koha
+ './tools' => 'INTRANET_CGI_DIR',
+ './virtualshelves' => 'INTRANET_CGI_DIR',
+ # ignore files and directories created by the install itself
+ './pm_to_blib' => 'NONE',
+ './blib' => 'NONE',
+};
+
+=head1 CONFIGURATION OPTIONS
+
+The following configuration options are used by the installer.
+
+=over 4
+
+=item INSTALL_MODE
+
+Specifies whether installation will be FHS-compliant (default,
+assumes user has root), put everything under
+a single directory (for users installing on a web host
+that allows CGI scripts and a MySQL database but not root
+access), or development (for a developer who wants to run
+Koha from a git clone with no fuss).
+
+=item INSTALL_BASE
+
+Directory under which most components will go. Default
+value will vary depending on INSTALL_MODE.
+
+=item DB_TYPE
+
+Type of DBMS (e.g., mysql or Pg).
+
+=item DB_HOST
+Name of DBMS server.
-while ($marc_value ne 'marc21' && $marc_value ne 'unimarc'){
- my $message= "Chose your flavour of MARC, unimarc or marc21 [marc21]";
- $marc_value=prompt($message) || 'marc21';
+=item DB_PORT
+
+Port that DBMS server is listening on.
+
+=item DB_NAME
+
+Name of the DBMS database for Koha.
+
+=item DB_USER
+
+Name of DBMS user account for Koha's database.
+
+=item DB_PASS
+
+Pasword of DMBS user account for Koha's database.
+
+=item INSTALL_ZEBRA
+
+Whether to install Zebra configuration files and data
+directories.
+
+=item ZEBRA_MARC_FORMAT
+
+Specifies format of MARC records to be indexed by Zebra.
+
+=item ZEBRA_LANGUAGE
+
+Specifies primary language of records that will be
+indexed by Zebra.
+
+=item ZEBRA_USER
+
+Internal Zebra user account for the index.
+
+=item ZEBRA_PASS
+
+Internal Zebra user account's password.
+
+=item KOHA_USER
+
+System user account that will own Koha's files.
+
+=item KOHA_GROUP
+
+System group that will own Koha's files.
+
+=back
+
+=cut
+
+# default configuration options
+my %config_defaults = (
+ 'DB_TYPE' => 'mysql',
+ 'DB_HOST' => 'localhost',
+ 'DB_NAME' => 'koha',
+ 'DB_USER' => 'kohaadmin',
+ 'DB_PASS' => 'katikoan',
+ 'INSTALL_ZEBRA' => 'yes',
+ 'INSTALL_SRU' => 'yes',
+ 'INSTALL_PAZPAR2' => 'no',
+ 'AUTH_INDEX_MODE' => 'grs1',
+ 'ZEBRA_MARC_FORMAT' => 'marc21',
+ 'ZEBRA_LANGUAGE' => 'en',
+ 'ZEBRA_USER' => 'kohauser',
+ 'ZEBRA_PASS' => 'zebrastripes',
+ 'ZEBRA_SRU_HOST' => 'localhost',
+ 'ZEBRA_SRU_BIBLIOS_PORT' => '9998',
+ 'ZEBRA_SRU_AUTHORITIES_PORT' => '9999',
+ 'KOHA_USER' => 'koha',
+ 'KOHA_GROUP' => 'koha',
+ 'MERGE_SERVER_HOST' => 'localhost',
+ 'MERGE_SERVER_PORT' => '11001',
+ 'PAZPAR2_HOST' => 'localhost',
+ 'PAZPAR2_PORT' => '11002',
+ 'RUN_DATABASE_TESTS' => 'no',
+ 'PATH_TO_ZEBRA' => '',
+);
+
+# set some default configuration options based on OS
+# more conditions need to be added for other OS's
+# this should probably also incorporate usage of Win32::GetOSName() and/or Win32::GetOSVersion()
+# to allow for more granular decisions based on which Win32 platform
+
+warn "Your platform appears to be $^O.\n" if $DEBUG;
+
+if ( $^O eq 'MSWin32' ) {
+ # Most Unix2Win32 ports seem to poke everything into the Program Files directory
+ # this could be changed to put some files (ie. libraries) into system32, etc.
+ $config_defaults{'INSTALL_MODE'} = 'single';
+ $config_defaults{'INSTALL_BASE'} = 'c:/progra~1/koha'; # Use 8.3 names to be safe...
+}
+elsif ( $^O eq 'cygwin' ) {
+ # Most Unix2Win32 ports seem to poke everything into the Program Files directory
+ # this could be changed to put some files (ie. libraries) into system32, etc.
+ $config_defaults{'INSTALL_MODE'} = 'single';
+ $config_defaults{'INSTALL_BASE'} = 'c:/progra~1/koha'; # Use 8.3 names to be safe...
}
-while ($lang_value ne 'en' && $lang_value ne 'fr'){
- my $message= "Choose your language, en or fr [en]";
- $lang_value=prompt($message) || 'en';
+else {
+ $config_defaults{'INSTALL_MODE'} = 'standard';
+ $config_defaults{'INSTALL_BASE'} = '/usr/share/koha';
}
-WriteMakefile(
+# valid values for certain configuration options
+my %valid_config_values = (
+ 'INSTALL_MODE' => { 'standard' => 1, 'single' => 1, 'dev' => 1 },
+ 'DB_TYPE' => { 'mysql' => 1, 'Pg' => 1 },
+ 'INSTALL_ZEBRA' => { 'yes' => 1, 'no' => 1 },
+ 'INSTALL_SRU' => { 'yes' => 1, 'no' => 1 },
+ 'AUTH_INDEX_MODE' => { 'grs1' => 1, 'dom' => 1 },
+ 'ZEBRA_MARC_FORMAT' => { 'marc21' => 1, 'unimarc' => 1 }, # FIXME should generate from contents of distributation
+ 'ZEBRA_LANGUAGE' => { 'en' => 1, 'fr' => 1 }, # FIXME should generate from contents of distribution
+ 'RUN_DATABASE_TESTS' => { 'yes' => 1, 'no' => 1 },
+);
+
+# get settings from command-line
+my $koha_install_log = "";
+Getopt::Long::Configure('pass_through');
+my $results = GetOptions(
+ "prev-install-log=s" => \$koha_install_log
+);
+
+my %install_log_values = ();
+if ($koha_install_log ne "") {
+ get_install_log_values($koha_install_log, \%install_log_values);
+}
- NAME => 'koha',
- #VERSION => strftime('2.9.%Y%m%d%H',gmtime),
- VERSION_FROM => 'kohaversion.pl',
- ABSTRACT => 'Award-winning integrated library system (ILS) and Web OPAC',
- AUTHOR => 'Koha Developers <koha-devel@nongnu.org>',
- NO_META => 1,
- INSTALLSITEBIN => '$(INSTALL_BASE)/lib',
- PREREQ_PM => {
-'Biblio::EndnoteStyle' => 0.05,
-'CGI' => 3.15,
-'CGI::Carp' => 1.29,
-'CGI::Session' => '4.10',
-'Class::Factory::Util' => 1.7,
-'Class::Accessor' => 0.30,
-'DBD::mysql' => 3.0008,
-'DBI' => 1.53,
-'Data::Dumper' => 2.121_08,
-'Date::Calc' => 5.4,
-'Date::Manip' => 5.44,
-'Digest::MD5' => 2.36,
-'File::Temp' => 0.16,
-'GD::Barcode::UPCE' => 1.1,
-'Getopt::Long' => 2.35,
-'Getopt::Std' => 1.05,
-'HTML::Template::Pro' => 0.65,
-'HTTP::Cookies' => 1.39,
-'HTTP::Request::Common' => 1.26,
-'LWP::Simple' => 1.41,
-'LWP::UserAgent' => 2.033,
-'Lingua::Stem' => 0.82,
-'List::Util' => 1.18,
-'Locale::Language' => 2.07,
-'MARC::Charset' => 0.98,
-'MARC::Crosswalk::DublinCore' => 0.03,
-'MARC::File::XML' => 0.88,
-'MARC::Record' => 2.00,
-'MARC::Crosswalk::DublinCore' => 0.02,
-'MIME::Base64' => 3.07,
-'MIME::QuotedPrint' => 3.07,
-'Mail::Sendmail' => 0.79,
-'Net::Z3950::ZOOM' => 1.16,
-'PDF::API2' => 2.000,
-'PDF::API2::Page' => 2.000,
-'PDF::API2::Util' => 2.000,
-'PDF::Reuse' => 0.33,
-'PDF::Reuse::Barcode' => 0.05,
-'POSIX' => 1.09,
-'Schedule::At' => 1.06,
-'Term::ANSIColor' => 1.10,
-'Test' => 1.25,
-'Test::Harness' => 2.56,
-'Test::More' => 0.62,
-'Text::CSV' => 0.01,
-'Text::CSV_XS' => 0.32,
-'Text::Wrap' => 2005.082401,
-'Time::HiRes' => 1.86,
-'Time::localtime' => 1.02,
-'Unicode::Normalize' => 0.32,
-'XML::Dumper' => 0.81,
-'XML::LibXML' => 1.59,
-'XML::LibXSLT' => 1.63,
-'XML::SAX::ParserFactory' => 1.01,
-'XML::Simple' => 2.14,
-'XML::RSS' => 1.31,
- },
-
- # File tree mapping
- PM => map_tree(),
-
- # disable tests
- 'test' => {TESTS => 't/dummy.t'},
-
-# CONFIGURE => sub {
-# # Ask for options with prompt($question,$default) calls here?
-# return { macro => { 'export TEST' => '755' } }
-# },
-
- PL_FILES => { # generator => target(s)
+my %config = get_configuration(\%config_defaults, \%valid_config_values, \%install_log_values);
+my ($target_directories, $skip_directories) = get_target_directories(\%config);
+display_configuration(\%config, $target_directories);
+my $file_map = {};
+get_file_map($target_map, $dirtree, $file_map, $config{'INSTALL_ZEBRA'} eq "yes" ? 1: 0);
+
+my $pl_files = {
'rewrite-config.PL' => [
- '$(INST_LIBDIR)/etc/koha-conf.xml',
- '$(INST_LIBDIR)/etc/koha-httpd.conf',
- '$(INST_LIBDIR)/etc/zebradb/etc/passwd',
- '$(INST_LIBDIR)/etc/zebradb/zebra-biblios.cfg',
- '$(INST_LIBDIR)/etc/zebradb/zebra-authorities.cfg'
- ]
- }
-# 'opac/getfromintranet.PL' => ['$(INST_LIBDIR)/opac/cgi-bin/detail.pl','$(INST_LIBDIR)/opac/cgi-bin/moredetail.pl','$(INST_LIBDIR)/opac/cgi-bin/search.pl','$(INST_LIBDIR)/opac/cgi-bin/subjectsearch.pl','$(INST_LIBDIR)/opac/cgi-bin/logout.pl'],
-# 'misc/koha.conf.PL' => '$(INST_LIBDIR)/../etc/koha.conf',
-# 'misc/apache-koha.conf.PL' => '$(INST_LIBDIR)/../etc/apache-koha.conf',
-# 'misc/koha.sql.PL' => '$(INST_LIBDIR)/intranet/scripts/koha.sql',
-# 'z3950/z3950-daemon-options.PL' => '$(INST_LIBDIR)/intranet/scripts/z3950daemon/z3950-daemon-options',
-# # fake target to check permissions
-# 'misc/chmod.PL' => '$(INST_LIBDIR)/fake-target'
-# }
-
+ 'blib/KOHA_CONF_DIR/koha-conf.xml',
+ 'blib/KOHA_CONF_DIR/koha-httpd.conf',
+ 'blib/MISC_DIR/koha-install-log'
+ ],
+ 'fix-perl-path.PL' => [ # this script ensures the correct shebang line for the platform installed on...
+ 'blib'
+ ]
+};
+
+if ($config{'INSTALL_ZEBRA'} eq "yes") {
+ push @{ $pl_files->{'rewrite-config.PL'} }, (
+ 'blib/ZEBRA_CONF_DIR/etc/passwd',
+ 'blib/ZEBRA_CONF_DIR/zebra-biblios.cfg',
+ 'blib/ZEBRA_CONF_DIR/zebra-authorities.cfg',
+ 'blib/ZEBRA_CONF_DIR/zebra-authorities-dom.cfg',
+ 'blib/ZEBRA_CONF_DIR/explain-authorities.xml',
+ 'blib/ZEBRA_CONF_DIR/explain-biblios.xml',
+ 'blib/ZEBRA_CONF_DIR/retrieval-info-auth-grs1.xml',
+ 'blib/ZEBRA_CONF_DIR/retrieval-info-auth-dom.xml',
+ );
+ push @{ $pl_files->{'rewrite-config.PL'} }, (
+ 'blib/SCRIPT_DIR/koha-zebra-ctl.sh',
+ 'blib/SCRIPT_DIR/koha-pazpar2-ctl.sh',
+ 'blib/SCRIPT_DIR/koha-zebraqueue-ctl.sh',
+ );
+ if ($config{'INSTALL_PAZPAR2'} eq 'yes') {
+ push @{ $pl_files->{'rewrite-config.PL'} }, (
+ 'blib/PAZPAR2_CONF_DIR/koha-biblios.xml',
+ 'blib/PAZPAR2_CONF_DIR/pazpar2.xml'
+ );
+ }
+ $config{'ZEBRA_AUTH_CFG'} = $config{'AUTH_INDEX_MODE'} eq 'dom' ? 'zebra-authorities-dom.cfg' : 'zebra-authorities.cfg';
+ $config{'AUTH_RETRIEVAL_CFG'} =
+ $config{'AUTH_INDEX_MODE'} eq 'dom' ? 'retrieval-info-auth-dom.xml' : 'retrieval-info-auth-grs1.xml';
+}
+
+if ($config{'INSTALL_MODE'} ne "dev") {
+ push @{ $pl_files->{'rewrite-config.PL'} }, (
+ 'blib/PERL_MODULE_DIR/C4/Context.pm',
+ 'blib/SCRIPT_NONDEV_DIR/kohalib.pl'
+ );
+}
+
+my %test_suite_override_dirs = (
+ KOHA_CONF_DIR => ['etc'],
+ ZEBRA_CONF_DIR => ['etc', 'zebradb'],
+ LOG_DIR => ['var', 'log'],
+ SCRIPT_DIR => ['bin'],
+ ZEBRA_LOCK_DIR => ['var', 'lock', 'zebradb'],
+ ZEBRA_DATA_DIR => ['var', 'lib', 'zebradb'],
+ ZEBRA_RUN_DIR => ['var', 'run', 'zebradb'],
+);
+
+WriteMakefile(
+ NAME => 'koha',
+ VERSION => '3.00.03',
+ #VERSION_FROM => 'kohaversion.pl',
+ ABSTRACT => 'Award-winning integrated library system (ILS) and Web OPAC',
+ AUTHOR => 'Koha Developers <koha-devel@lists.koha.org>',
+ NO_META => 1,
+ PREREQ_PM => {
+ 'Algorithm::CheckDigits' => 0.50,
+ 'Biblio::EndnoteStyle' => 0.05,
+ 'CGI' => 3.15,
+ 'CGI::Carp' => 1.29,
+ 'CGI::Session' => 4.20,
+ 'CGI::Session::Serialize::yaml' => 4.20,
+ 'Class::Factory::Util' => 1.6,
+ 'Class::Accessor' => 0.30,
+ 'DBD::mysql' => 4.004,
+ 'DBI' => 1.53,
+ 'Data::Dumper' => 2.121,
+ 'Data::ICal' => 0.13,
+ 'Date::Calc' => 5.4,
+ 'Date::ICal' => 1.72,
+ 'Date::Manip' => 5.44,
+ 'Digest::MD5' => 2.36,
+ 'Digest::SHA' => 5.43,
+ 'Email::Date' => 1.103,
+ 'File::Temp' => 0.16,
+ 'GD' => 2.39, #optional
+ 'GD::Barcode::UPCE' => 1.1,
+ 'Getopt::Long' => 2.35,
+ 'Getopt::Std' => 1.05,
+ 'HTML::Template::Pro' => 0.69,
+ 'HTML::Scrubber' => 0.08,
+ 'HTTP::Cookies' => 1.39,
+ 'HTTP::OAI' => 3.20,
+ 'HTTP::Request::Common' => 1.26,
+ 'IPC::Cmd' => 0.46,
+ 'JSON' => 2.07, # Needed by admin/item_circulation_alerts.pl
+ 'LWP::Simple' => 1.41,
+ 'LWP::UserAgent' => 2.033,
+ 'Lingua::Stem' => 0.82,
+ 'List::Util' => 1.18,
+ 'List::MoreUtils' => 0.21,
+ 'Locale::Language' => 2.07,
+ 'MARC::Charset' => 0.98,
+ 'MARC::Crosswalk::DublinCore' => 0.02,
+ 'MARC::File::XML' => 0.88,
+ 'MARC::Record' => 2.00,
+ 'MIME::Base64' => 3.07,
+ 'MIME::Lite' => 3.00,
+ 'MIME::QuotedPrint' => 3.07,
+ 'Mail::Sendmail' => 0.79,
+ 'Net::LDAP' => 0.33, # optional
+ 'Net::LDAP::Filter' => 0.14, # optional
+ 'Net::Z3950::ZOOM' => 1.16,
+ 'PDF::API2' => 2.000,
+ 'PDF::API2::Page' => 2.000,
+ 'PDF::API2::Util' => 2.000,
+ 'PDF::Reuse' => 0.33,
+ 'PDF::Reuse::Barcode' => 0.05,
+ 'POE' => 0.9999,
+ 'POSIX' => 1.09,
+ 'Schedule::At' => 1.06,
+ 'SMS::Send' => 0.05, # optional
+ 'Term::ANSIColor' => 1.10,
+ 'Test' => 1.25,
+ 'Test::Harness' => 2.56,
+ 'Test::More' => 0.62,
+ 'Text::CSV' => 0.01,
+ 'Text::CSV_XS' => 0.32,
+ 'Text::Iconv' => 1.7,
+ 'Text::Wrap' => 2005.082401,
+ 'Time::HiRes' => 1.86,
+ 'Time::localtime' => 1.02,
+ 'Unicode::Normalize' => 0.32,
+ 'URI::Escape' => 1.36,
+ 'XML::Dumper' => 0.81,
+ 'XML::LibXML' => 1.59,
+ 'XML::LibXSLT' => 1.59,
+ 'XML::SAX::ParserFactory' => 1.01,
+ 'XML::SAX::Writer' => 0.44,
+ 'XML::Simple' => 2.14,
+ 'XML::RSS' => 1.31,
+ 'YAML::Syck' => 0.71,
+ },
- # need to set ownerships
- # need to load koha.sql
- # need to link koha-httpd.conf
- # need to start z3950-daemon
+ # File tree mapping
+ PM => $file_map,
+
+ # Man pages generated from POD
+ # ExtUtils::MakeMaker already manage $(DESTDIR)
+ INSTALLMAN1DIR => File::Spec->catdir(_strip_destdir($target_directories->{'MAN_DIR'}), 'man1'),
+ INSTALLMAN3DIR => File::Spec->catdir(_strip_destdir($target_directories->{'MAN_DIR'}), 'man3'),
+
+ PL_FILES => $pl_files,
);
=head1 FUNCTIONS
-=head2 map_tree
+=head2 hashdir
-This function lists all files and where to install each one.
-It returns a hash reference suitable for the PM variable above.
+This function recurses through the directory structure and builds
+a hash of hashes containing the structure with arrays holding filenames.
+This directory hashing routine was taken from BrowserUK @ http://www.perlmonks.org/?node_id=219919
=cut
-sub map_tree {
- my %result => ();
+sub hashdir{
+ my $dir = shift;
+ opendir my $dh, $dir or die $!;
+ my $tree = {}->{$dir} = {};
+ while( my $file = readdir($dh) ) {
+ next if $file =~ m/^\.{1,2}/ and $file !~ /^\.htaccess/; # .htaccess is a special case
+ my $path = $dir .'/' . $file;
+ $tree->{$file} = hashdir($path), next if -d $path;
+ push @{$tree->{'.'}}, $file;
+ }
+ return $tree;
+}
+
+=head2 get_file_map
+
+This function combines the target_map and file hash to
+map each source file to its destination relative to
+the set of installation targets.
-=pod
+Output will be a hash mapping from each source file
+to its destination value, like this:
-C4/*.pm is copied to perl's lib namespace.
+'mainpage.pl' => '$(INTRANET_CGI_DIR)/mainpage.pl'
=cut
- foreach my $src (glob("C4/*.pm")) {
- $result{$src} = '$(INST_LIBDIR)/'.$src;
- }
-=pod
+sub get_file_map {
+ my $target_map = shift;
+ my $dirtree = shift;
+ my $file_map = shift;
+ my $install_zebra = shift;
+ my $curr_path = @_ ? shift : ['.'];
+
+ # Traverse the directory tree.
+ # For each file or directory, identify the
+ # most specific match in the target_map
+ foreach my $dir (sort keys %{ $dirtree }) {
+ if ($dir eq '.') {
+ # deal with files in directory
+ foreach my $file (sort @{ $dirtree->{$dir} }) {
+ my $targetdir = undef;
+ my $matchlevel = undef;
+ # first, see if there is a match on this specific
+ # file in the target map
+ my $filepath = join("/", @$curr_path, $file);
+ if (exists $target_map->{$filepath}) {
+ $targetdir = $target_map->{$filepath};
+ $matchlevel = scalar(@$curr_path) + 1;
+ } else {
+ # no match on the specific file; look for
+ # a directory match
+ for (my $i = scalar(@$curr_path) - 1; $i >= 0; $i--) {
+ my $dirpath = join("/", @$curr_path[0..$i]);
+ if (exists $target_map->{$dirpath}) {
+ $targetdir = $target_map->{$dirpath};
+ $matchlevel = $i + 1;
+ last;
+ }
+ }
+ }
+ if (defined $targetdir) {
+ _add_to_file_map($file_map, $targetdir, $curr_path, $file, $matchlevel, $install_zebra);
+ } else {
+ my $path = join("/", @$curr_path);
+ print "failed to map: $path/$file\n" if $DEBUG;
+ }
+ }
+ } else {
+ # dealing with subdirectory
+ push @$curr_path, $dir;
+ get_file_map($target_map, $dirtree->{$dir}, $file_map, $install_zebra, $curr_path);
+ pop @$curr_path;
+ }
+ }
+}
-CGIs are copied to $(INSTALL_BASE)/lib/cgi-bin/koha/
-and other scripts to koha/
+sub _add_to_file_map {
+ my $file_map = shift;
+ my $targetdir = shift;
+ my $curr_path = shift;
+ my $file = shift;
+ my $matchlevel = shift;
+ my $install_zebra = shift;
+ my $dest_path = @_ ? shift : $curr_path;
+
+ # The target can be one of the following:
+ # 1. scalar representing target symbol
+ # 2. hash ref containing target and trimdir keys
+ #
+ # Consequently, this routine traverses this structure,
+ # calling itself recursively, until it deals with
+ # all of the scalar target symbols.
+ if (ref $targetdir eq 'HASH') {
+ my $subtarget = $targetdir->{target};
+ if (exists $targetdir->{trimdir}) {
+ # if we get here, we've specified that
+ # rather than installing the file to
+ # $(TARGET)/matching/dirs/subdirs/file,
+ # we want to install it to
+ # $(TARGET)/subdirs/file
+ #
+ # Note that this the only place where
+ # $matchlevel is used.
+ my @new_dest_path = @$dest_path;
+ if ($targetdir->{trimdir} == -1) {
+ splice @new_dest_path, 0, $matchlevel;
+ } else {
+ splice @new_dest_path, 0, $targetdir->{trimdir};
+ }
+ _add_to_file_map($file_map, $subtarget, $curr_path, $file, $matchlevel, $install_zebra, \@new_dest_path);
+ } else {
+ # actually getting here means that the
+ # target was unnecessarily listed
+ # as a hash, but we'll forgive that
+ _add_to_file_map($file_map, $subtarget, $curr_path, $file, $matchlevel, $install_zebra);
+ }
+ } elsif ($targetdir ne 'NONE' and $targetdir ne '') {
+ my $source = File::Spec->catfile(@$curr_path, $file);
+ my $destination = File::Spec->catfile('blib', $targetdir, @$dest_path, $file);
+ #print "$source => $destination\n"; # DEBUG
+ # quote spaces in file names
+ # FIXME: this is of questionable portability and
+ # probably depends on user's make recognizing this
+ # quoting syntax -- probably better to remove
+ # spaces and shell metacharacters from all file names
+ $source =~ s/ /\\ /g;
+ $destination =~ s/ /\\ /g;
+
+ $file_map->{$source} = $destination unless (!$install_zebra and $targetdir =~ /ZEBRA/);
+ }
+}
+
+=head2 get_install_log_values
+
+Reads value from the Koha install log specified by
+--prev-install-log
=cut
- foreach my $src ("mainpage.pl","help.pl","kohaversion.pl",glob("*/*.pl"),glob("installer/*"),glob("installer/*/*/*/*"),glob("installer/*/*/*/*/*"),glob("*/*/*.pl"),glob("*/*/*/*.pl"),glob("installer/*/*/*.sql"))
-{
- if (-f $src) {
- if ($src =~ /(misc|updater|rss)\//) {
- $result{$src} = '$(INST_BIN)/koha/'.$src;
- }
- elsif ($src =~ /opac\//){
- $result{$src} = '$(INST_BIN)/cgi-bin/'.$src;
- } else {
- $result{$src} = '$(INST_BIN)/cgi-bin/koha/'.$src;
- }
- }
- }
-=pod
+sub get_install_log_values {
+ my $install_log = shift;
+ my $values = shift;
+
+ open LOG, "<$install_log" or die "Cannot open install log $install_log: $!\n";
+ while (<LOG>) {
+ chomp;
+ next if /^#/ or /^\s*$/;
+ next if /^=/;
+ next unless m/=/;
+ s/\s+$//g;
+ my ($key, $value) = split /=/, $_, 2;
+ $values->{$key} = $value;
+ }
+ close LOG;
+
+ print <<_EXPLAIN_INSTALL_LOG_;
+Reading values from install log $install_log. You
+will be prompted only for settings that have been
+added since the last time you installed Koha. To
+be prompted for all settings, run 'perl Makefile.PL'
+without the --prev-install-log option.
+_EXPLAIN_INSTALL_LOG_
+}
+
+=head2 get_configuration
+
+This prompts the user for various configuration options.
+
+=cut
+
+sub get_configuration {
+ my $defaults = shift;
+ my $valid_values = shift;
+ my $install_log_values = shift;
+ my %config = ();
+
+ my $msg = q(
+By default, Koha can be installed in one of three ways:
+
+standard: Install files in conformance with the Filesystem
+ Hierarchy Standard (FHS). This is the default mode
+ and should be used when installing a production
+ Koha system. On Unix systems, root access is
+ needed to complete a standard installation.
+
+single: Install files under a single directory. This option
+ is useful for installing Koha without root access, e.g.,
+ on a web host that allows CGI scripts and MySQL databases
+ but requires the user to keep all files under the user's
+ HOME directory.
+
+dev: Create a set of symbolic links and configuration files to
+ allow Koha to run directly from the source distribution.
+ This mode is useful for developers who want to run
+ Koha from a git clone.
-Templates are copied to koha/templates,
+Installation mode);
+ $msg .= _add_valid_values_disp('INSTALL_MODE', $valid_values);
+ $config{'INSTALL_MODE'} = _get_value('INSTALL_MODE', $msg, $defaults->{'INSTALL_MODE'}, $valid_values, $install_log_values);
+
+ # set message and default value for INSTALL_BASE
+ # depending on value of INSTALL_MODE
+ my $install_base_default = $defaults->{'INSTALL_BASE'};
+ if ($config{'INSTALL_MODE'} eq 'dev') {
+ $msg = q(
+Please specify the directory in which to install Koha's
+active configuration files and (if applicable) the
+Zebra database. Koha's CGI scripts and templates will
+be run from the current directory.
+
+Configuration directory:);
+ # FIXME - home directory portability consideration apply
+ $install_base_default = (exists $ENV{'HOME'}) ? "$ENV{'HOME'}/koha-dev" : "$defaults->{'INSTALL_BASE'}-dev";
+ } elsif ($config{'INSTALL_MODE'} eq 'single') {
+ $msg = "\nPlease specify the directory in which to install Koha";
+ # FIXME -- we're assuming under a 'single' mode install
+ # that user will likely want to install under the home
+ # directory. This is OK in and of itself, but we should
+ # use File::HomeDir to locate the home directory portably.
+ # This is deferred for now because File::HomeDir is not yet
+ # core.
+ # --we must also keep this portable to the major OS's -fbcit
+ $install_base_default = (exists $ENV{'HOME'}) ? "$ENV{'HOME'}/koha" : $defaults->{'INSTALL_BASE'};
+ } else {
+ # must be standard
+ $msg = q(
+Please specify the directory under which most Koha files
+will be installed.
+
+Note that if you are planning in installing more than
+one instance of Koha, you may want to modify the last
+component of the directory path, which will be used
+as the package name in the FHS layout.
+
+Base installation directory);
+ }
+ $config{'INSTALL_BASE'} = _get_value('INSTALL_BASE', $msg, $install_base_default, $valid_values, $install_log_values);
+
+ $config{'INSTALL_BASE'} = File::Spec->rel2abs($config{'INSTALL_BASE'});
+ print "INSTALL_BASE=$config{'INSTALL_BASE'}\r\n" if $DEBUG;
+ if ($config{'INSTALL_MODE'} eq "standard") {
+ $msg = q(
+Since you are using the 'standard' install
+mode, you should run 'make install' as root.
+However, it is recommended that a non-root
+user (on Unix and Linux platforms) have
+ownership of Koha's files, including the
+Zebra indexes if applicable.
+
+Please specify a user account. This
+user account does not need to exist
+right now, but it needs to exist
+before you run 'make install'. Please
+note that for security reasons, this
+user should not be the same as the user
+account Apache runs under.
+
+User account);
+ $config{'KOHA_USER'} = _get_value('KOHA_USER', $msg, $defaults->{'KOHA_USER'}, $valid_values, $install_log_values);
+
+ $msg = q(
+Please specify the group that should own
+Koha's files. As above, this group need
+not exist right now, but should be created
+before you run 'make install'.
+
+Group);
+ $config{'KOHA_GROUP'} = _get_value('KOHA_GROUP', $msg, $defaults->{'KOHA_GROUP'}, $valid_values, $install_log_values);
+ }
+
+ $msg = q(
+Please specify which database engine you will use
+to store data in Koha. The choices are MySQL and
+PostgreSQL; please note that at the moment
+PostgreSQL support is highly experimental.
+
+DBMS to use);
+ $msg .= _add_valid_values_disp('DB_TYPE', $valid_values);
+ $config{'DB_TYPE'} = _get_value('DB_TYPE', $msg, $defaults->{'DB_TYPE'}, $valid_values, $install_log_values);
+
+ $msg = q(
+Please specify the name or address of your
+database server. Note that the database
+does not have to exist at this point, it
+can be created after running 'make install'
+and before you try using Koha for the first time.
+
+Database server);
+ $config{'DB_HOST'} = _get_value('DB_HOST', $msg, $defaults->{'DB_HOST'}, $valid_values, $install_log_values);
+
+ $msg = q(
+Please specify the port used to connect to the
+DMBS);
+ my $db_port_default = $config{'DB_TYPE'} eq 'mysql' ? '3306' : '5432';
+ $config{'DB_PORT'} = _get_value('DB_PORT', $msg, $db_port_default, $valid_values, $install_log_values);
+
+ $msg = q(
+Please specify the name of the database to be
+used by Koha);
+ $config{'DB_NAME'} = _get_value('DB_NAME', $msg, $defaults->{'DB_NAME'}, $valid_values, $install_log_values);
+
+ $msg = q(
+Please specify the user that owns the database to be
+used by Koha);
+ $config{'DB_USER'} = _get_value('DB_USER', $msg, $defaults->{'DB_USER'}, $valid_values, $install_log_values);
+
+ $msg = q(
+Please specify the password of the user that owns the
+database to be used by Koha);
+ $config{'DB_PASS'} = _get_value('DB_PASS', $msg, $defaults->{'DB_PASS'}, $valid_values, $install_log_values);
+
+ $msg = q(
+Koha can use the Zebra search engine for high-performance
+searching of bibliographic and authority records. If you
+have installed the Zebra software and would like to use it,
+please answer 'yes' to the following question. Otherwise,
+Koha will default to using its internal search engine.
+
+Please note that if you choose *NOT* to install Zebra,
+koha-conf.xml will still contain some references to Zebra
+settings. Those references will be ignored by Koha.
+
+Install the Zebra configuration files?);
+ $msg .= _add_valid_values_disp('INSTALL_ZEBRA', $valid_values);
+ $config{'INSTALL_ZEBRA'} = _get_value('INSTALL_ZEBRA', $msg, $defaults->{'INSTALL_ZEBRA'}, $valid_values, $install_log_values);
+
+ if ($config{'INSTALL_ZEBRA'} eq 'yes') {
+
+ if (defined(my $zebra_path = find_zebra())) {
+ $config{'PATH_TO_ZEBRA'} = $zebra_path;
+ print qq(
+Found 'zebrasrv' and 'zebraidx' in $zebra_path.
+);
+ } else {
+ print q(
+Unable to find the Zebra programs 'zebrasrv' and 'zebraidx'
+in your PATH or in some of the usual places. If you haven't
+installed Zebra yet, please do so and run Makefile.PL again.
+
+);
+ }
+
+ $msg = q(
+Since you've chosen to use Zebra with Koha,
+you must specify the primary MARC format of the
+records to be indexed by Zebra.
+
+Koha provides Zebra configuration files for MARC 21
+and UNIMARC.
+
+MARC format for Zebra indexing);
+ $msg .= _add_valid_values_disp('ZEBRA_MARC_FORMAT', $valid_values);
+ $config{'ZEBRA_MARC_FORMAT'} = _get_value('ZEBRA_MARC_FORMAT', $msg, $defaults->{'ZEBRA_MARC_FORMAT'}, $valid_values, $install_log_values);
+ $msg = q(
+Koha supplies Zebra configuration files tuned for
+searching either English (en) or French (fr) MARC
+records.
+
+Primary language for Zebra indexing);
+ $msg .= _add_valid_values_disp('ZEBRA_LANGUAGE', $valid_values);
+ $config{'ZEBRA_LANGUAGE'} = _get_value('ZEBRA_LANGUAGE', $msg, $defaults->{'ZEBRA_LANGUAGE'}, $valid_values, $install_log_values);
+
+ $msg = q(
+Koha can use one of two different indexing modes
+for the MARC authorities records:
+
+grs1 - uses the Zebra GRS-1 filter, available
+ for legacy support
+dom - uses the DOM XML filter; offers improved
+ functionality.
+
+Authorities indexing mode);
+ $msg .= _add_valid_values_disp('AUTH_INDEX_MODE', $valid_values);
+ $config{'AUTH_INDEX_MODE'} = _get_value('AUTH_INDEX_MODE', $msg, $defaults->{'AUTH_INDEX_MODE'}, $valid_values, $install_log_values);
+
+ $msg = q(
+Please specify Zebra database user);
+ $config{'ZEBRA_USER'} = _get_value('ZEBRA_USER', $msg, $defaults->{'ZEBRA_USER'}, $valid_values, $install_log_values);
+
+ $msg = q(
+Please specify the Zebra database password);
+ $config{'ZEBRA_PASS'} = _get_value('ZEBRA_PASS', $msg, $defaults->{'ZEBRA_PASS'}, $valid_values, $install_log_values);
+
+ $msg = q(
+Since you've chosen to use Zebra, you can enable the SRU/
+Z39.50 Server if you so choose, but you must specify a
+few configuration options for it.
+
+Please note that if you choose *NOT* to configure SRU,
+koha-conf.xml will still contain some references to SRU
+settings. Those references will be ignored by Koha.
+
+Install the SRU configuration files?);
+ $msg .= _add_valid_values_disp('INSTALL_SRU', $valid_values);
+ $config{'INSTALL_SRU'} = _get_value('INSTALL_SRU', $msg, $defaults->{'INSTALL_SRU'}, $valid_values, $install_log_values);
+
+ if ($config{'INSTALL_SRU'} eq 'yes') {
+ $msg = q(
+Since you've chosen to configure SRU, you must
+specify the host and port(s) that the SRU
+Servers (bibliographic and authority) should run on.
+);
+ $msg = q(
+SRU Database host?);
+ $config{'ZEBRA_SRU_HOST'} = _get_value('ZEBRA_SRU_HOST', $msg, $defaults->{'ZEBRA_SRU_HOST'}, $valid_values, $install_log_values);
+
+ $msg = q(
+SRU port for bibliographic data?);
+ $config{'ZEBRA_SRU_BIBLIOS_PORT'} = _get_value('ZEBRA_SRU_BIBLIOS_PORT', $msg, $defaults->{'ZEBRA_SRU_BIBLIOS_PORT'}, $valid_values, $install_log_values);
+
+ $msg = q(
+SRU port for authority data?);
+ $config{'ZEBRA_SRU_AUTHORITIES_PORT'} = _get_value('ZEBRA_SRU_AUTHORITIES_PORT', $msg, $defaults->{'ZEBRA_SRU_AUTHORITIES_PORT'}, $valid_values, $install_log_values);
+
+ }
+
+ $msg = q(
+Since you've chosen to use Zebra, you can also choose to
+install PazPar2, which is a metasearch tool. With PazPar2,
+Koha can perform on-the-fly merging of bibliographic
+records during searching, allowing for FRBRization of
+the results list.
+
+Install the PazPar2 configuration files?);
+ $msg .= _add_valid_values_disp('INSTALL_PAZPAR2', $valid_values);
+ $config{'INSTALL_PAZPAR2'} = _get_value('INSTALL_PAZPAR2', $msg, $defaults->{'INSTALL_PAZPAR2'}, $valid_values, $install_log_values);
+
+ if ($config{'INSTALL_PAZPAR2'} eq 'yes') {
+ $msg = q(
+Since you've chosen to configure PazPar2, you must
+specify the host and port(s) that PazPar2
+uses:
+);
+ $msg = q(
+Zebra bibliographic server host?);
+ $config{'MERGE_SERVER_HOST'} = _get_value('MERGE_SERVER_HOST', $msg, $defaults->{'MERGE_SERVER_HOST'}, $valid_values, $install_log_values);
+
+ $msg = q(
+Zebra bibliographic port for PazPar2 to use?);
+ $config{'MERGE_SERVER_PORT'} = _get_value('MERGE_SERVER_PORT', $msg, $defaults->{'MERGE_SERVER_PORT'}, $valid_values, $install_log_values);
+
+ $msg = q(
+PazPar2 host?);
+ $config{'PAZPAR2_HOST'} = _get_value('PAZPAR2_HOST', $msg, $defaults->{'PAZPAR2_HOST'}, $valid_values, $install_log_values);
+
+ $msg = q(
+PazPar2 port?);
+ $config{'PAZPAR2_PORT'} = _get_value('PAZPAR2_PORT', $msg, $defaults->{'PAZPAR2_PORT'}, $valid_values, $install_log_values);
+
+ }
+ }
+
+ $msg = q(
+Would you like to run the database-dependent test suite?);
+ $msg .= _add_valid_values_disp( 'RUN_DATABASE_TESTS', $valid_values );
+ $config{'RUN_DATABASE_TESTS'} = _get_value( 'RUN_DATABASE_TESTS', $msg, $defaults->{'RUN_DATABASE_TESTS'}, $valid_values, $install_log_values );
+
+ if ( $config{'RUN_DATABASE_TESTS'} eq 'yes' ) {
+ $config{'TEST_DB_TYPE'} = $config{'DB_TYPE'};
+ $config{'TEST_DB_HOST'} = $config{'DB_HOST'};
+ $msg = q(TEST DATABASE
+
+THE DATA IN THIS DATABASE WILL BE DESTROYED during the process of
+testing. Please don't do this on your production database. It is not
+reversable.
+
+YOU WILL SUFFER DATA LOSS if you run this test suite on your test
+database. You are better off not running this optional test suite than
+doing it in a database that you don't want to lose.
+
+Please specify the name of the test database to be
+used by Koha);
+
+ $config{'TEST_DB_NAME'} = _get_value('TEST_DB_NAME', $msg, $defaults->{'TEST_DB_NAME'}, $valid_values, $install_log_values);
+ while ( $config{'TEST_DB_NAME'} eq $config{'DB_NAME'} ) {
+ $msg = q(Please do not use the same database for testing as you do for production. You run the severe risk of data loss.);
+ $config{'TEST_DB_NAME'} = _get_value('TEST_DB_NAME', $msg, $defaults->{'TEST_DB_NAME'}, $valid_values, $install_log_values);
+ }
+
+ $msg = q(
+Please specify the user that owns the database to be
+used by Koha);
+ $config{'TEST_DB_USER'} = _get_value('TEST_DB_USER', $msg, $defaults->{'TEST_DB_USER'}, $valid_values, $install_log_values);
+
+ $msg = q(
+Please specify the password of the user that owns the
+database to be used by Koha);
+ $config{'TEST_DB_PASS'} = _get_value('TEST_DB_PASS', $msg, $defaults->{'TEST_DB_PASS'}, $valid_values, $install_log_values);
+ }
+
+ print "\n\n";
+
+ # add version number
+ my $version = "no_version_found";
+ eval {
+ require 'kohaversion.pl';
+ $version = kohaversion();
+ };
+ $config{'KOHA_INSTALLED_VERSION'} = $version;
+
+ return %config;
+}
+
+sub _add_valid_values_disp {
+ my $key = shift;
+ my $valid_values = shift;
+
+ my $disp = "";
+ if (exists $valid_values->{$key}) {
+ $disp = " (" . join(", ", sort keys %{ $valid_values->{$key} }) . ")";
+ }
+ return $disp;
+}
+
+sub _get_value {
+ my $key = shift;
+ my $msg = shift;
+ my $default = shift;
+ my $valid_values = shift;
+ my $install_log_values = shift;
+
+ # take value from install log if present
+ if (exists $install_log_values{$key}) {
+ return $install_log_values{$key};
+ }
+
+ # override default value from environment
+ if (exists $ENV{$key}) {
+ $default = $ENV{$key};
+ $msg .= " (default from environment)";
+ }
+
+ my $val = prompt($msg, $default);
+
+ while (exists $valid_values->{$key} and
+ $val ne $default and
+ not exists $valid_values->{$key}->{$val}) {
+ my $retry_msg = "Value '$val' is not a valid option.\n";
+ $retry_msg .= "Please enter a value";
+ $retry_msg .= _add_valid_values_disp($key, $valid_values);
+ $val = prompt($retry_msg, $default);
+ }
+ return $val;
+}
+
+=head2 get_target_directories
+
+Creates a hash mapping from symbols for installation target
+directories to actual directory paths.
+
+Also returns a hash indicating targets for which
+files need not be copied -- this is used for the 'dev'
+mode installation, where some files are installed in place.
=cut
- foreach my $src (glob("koha-tmpl/*"),glob("koha-tmpl/intranet-tmpl/*/*/*"),glob("koha-tmpl/intranet-tmpl/*/*/*/*"),glob("koha-tmpl/intranet-tmpl/*/*/*/*/*"),glob("koha-tmpl/opac-tmpl/*/*/*"),glob("koha-tmpl/opac-tmpl/*/*/*/*"),glob("koha-tmpl/opac-tmpl/*/*/*/*/*")) {
-=pod
+sub get_target_directories {
+ my $config = shift;
+
+ my $base = $config->{'INSTALL_BASE'};
+ my $mode = $config->{'INSTALL_MODE'};
-excluding non-files and whitespace in filenames.
+ # get last component of install base directory
+ # to treat as package name
+ my ($volume, $directories, $file) = File::Spec->splitpath($base, 1);
+
+ my @basedir = File::Spec->splitdir($directories);
+
+ # for Win32 we need to prepend the volume to the directory path
+ if ( $^O eq 'MSWin32' ) { shift @basedir; unshift @basedir, $volume; }
+ elsif ( $^O eq 'cygwin' ) { shift @basedir; unshift @basedir, 'c:'; } # in a cygwin environment, $volume is returned empty
+
+ my $package = pop @basedir;
+
+
+ my %dirmap = ();
+ my %skipdirs = ();
+ if ($mode eq 'single') {
+ $dirmap{'INTRANET_CGI_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'cgi-bin');
+ $dirmap{'INTRANET_TMPL_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'htdocs', 'intranet-tmpl');
+ $dirmap{'INTRANET_WWW_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'htdocs');
+ $dirmap{'OPAC_CGI_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'cgi-bin');
+ $dirmap{'OPAC_TMPL_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'htdocs', 'opac-tmpl');
+ $dirmap{'OPAC_WWW_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'htdocs');
+ $dirmap{'PERL_MODULE_DIR'} = File::Spec->catdir(@basedir, $package, 'lib');
+ $dirmap{'KOHA_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc');
+ $dirmap{'ZEBRA_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc', 'zebradb');
+ $dirmap{'PAZPAR2_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc', 'pazpar2');
+ $dirmap{'MISC_DIR'} = File::Spec->catdir(@basedir, $package, 'misc');
+ $dirmap{'SCRIPT_DIR'} = File::Spec->catdir(@basedir, $package, 'bin');
+ $dirmap{'SCRIPT_NONDEV_DIR'} = $dirmap{'SCRIPT_DIR'};
+ $dirmap{'MAN_DIR'} = File::Spec->catdir(@basedir, $package, 'man');
+ $dirmap{'DOC_DIR'} = File::Spec->catdir(@basedir, $package, 'doc');
+ $dirmap{'ZEBRA_LOCK_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'lock', 'zebradb');
+ $dirmap{'LOG_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'log');
+ $dirmap{'ZEBRA_DATA_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'lib', 'zebradb');
+ $dirmap{'ZEBRA_RUN_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'run', 'zebradb');
+ } elsif ($mode eq 'dev') {
+ my $curdir = File::Spec->rel2abs(File::Spec->curdir());
+ $dirmap{'INTRANET_CGI_DIR'} = File::Spec->catdir($curdir);
+ $skipdirs{'INTRANET_CGI_DIR'} = 1;
+ $dirmap{'INTRANET_TMPL_DIR'} = File::Spec->catdir($curdir, 'koha-tmpl', 'intranet-tmpl');
+ $skipdirs{'INTRANET_TMPL_DIR'} = 1;
+ $dirmap{'INTRANET_WWW_DIR'} = File::Spec->catdir($curdir, 'koha-tmpl');
+ $skipdirs{'INTRANET_WWW_DIR'} = 1;
+ $dirmap{'OPAC_CGI_DIR'} = File::Spec->catdir($curdir);
+ $skipdirs{'OPAC_CGI_DIR'} = 1;
+ $dirmap{'OPAC_TMPL_DIR'} = File::Spec->catdir($curdir, 'koha-tmpl', 'opac-tmpl');
+ $skipdirs{'OPAC_TMPL_DIR'} = 1;
+ $dirmap{'OPAC_WWW_DIR'} = File::Spec->catdir($curdir, 'koha-tmpl');
+ $skipdirs{'OPAC_WWW_DIR'} = 1;
+ $dirmap{'PERL_MODULE_DIR'} = File::Spec->catdir($curdir);
+ $skipdirs{'PERL_MODULE_DIR'} = 1;
+ $dirmap{'KOHA_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc');
+ $dirmap{'ZEBRA_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc', 'zebradb');
+ $dirmap{'PAZPAR2_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc', 'pazpar2');
+ $dirmap{'MISC_DIR'} = File::Spec->catdir(@basedir, $package, 'misc');
+ $dirmap{'SCRIPT_DIR'} = File::Spec->catdir(@basedir, $package, 'bin');
+ $dirmap{'SCRIPT_NONDEV_DIR'} = $dirmap{'SCRIPT_DIR'};
+ $skipdirs{'SCRIPT_NONDEV_DIR'} = 1;
+ $dirmap{'MAN_DIR'} = File::Spec->catdir(@basedir, $package, 'man');
+ $dirmap{'DOC_DIR'} = File::Spec->catdir(@basedir, $package, 'doc');
+ $dirmap{'ZEBRA_LOCK_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'lock', 'zebradb');
+ $dirmap{'LOG_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'log');
+ $dirmap{'ZEBRA_DATA_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'lib', 'zebradb');
+ $dirmap{'ZEBRA_RUN_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'run', 'zebradb');
+ } else {
+ # mode is standard, i.e., 'fhs'
+ $dirmap{'INTRANET_CGI_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'cgi-bin');
+ $dirmap{'INTRANET_TMPL_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'htdocs', 'intranet-tmpl');
+ $dirmap{'INTRANET_WWW_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'htdocs');
+ $dirmap{'OPAC_CGI_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'cgi-bin');
+ $dirmap{'OPAC_TMPL_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'htdocs', 'opac-tmpl');
+ $dirmap{'OPAC_WWW_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'htdocs');
+ $dirmap{'PERL_MODULE_DIR'} = File::Spec->catdir(@basedir, $package, 'lib');
+ $dirmap{'KOHA_CONF_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'etc', $package);
+ $dirmap{'ZEBRA_CONF_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'etc', $package, 'zebradb');
+ $dirmap{'PAZPAR2_CONF_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'etc', $package, 'pazpar2');
+ $dirmap{'MISC_DIR'} = File::Spec->catdir(@basedir, $package, 'misc');
+ $dirmap{'SCRIPT_DIR'} = File::Spec->catdir(@basedir, $package, 'bin');
+ $dirmap{'SCRIPT_NONDEV_DIR'} = $dirmap{'SCRIPT_DIR'};
+ $dirmap{'MAN_DIR'} = File::Spec->catdir(@basedir, $package, 'man');
+ $dirmap{'DOC_DIR'} = File::Spec->catdir(@basedir, $package, 'doc');
+ $dirmap{'ZEBRA_LOCK_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'lock', $package, 'zebradb');
+ $dirmap{'LOG_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'log', $package);
+ $dirmap{'ZEBRA_DATA_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'lib', $package, 'zebradb');
+ $dirmap{'ZEBRA_RUN_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'run', $package, 'zebradb');
+ }
+
+ _get_env_overrides(\%dirmap);
+ _get_argv_overrides(\%dirmap);
+ _add_destdir(\%dirmap);
+
+ return \%dirmap, \%skipdirs;
+}
+
+=head2 get_test_dir
+
+Map a directory target to the corresponding path for
+the test suite.
+
+=cut
+
+sub get_test_dir {
+ my ($dirname) = @_;
+
+ my @basedir = (File::Spec->rel2abs(File::Spec->curdir()), 't', 'run');
+ if (exists $test_suite_override_dirs{$dirname}) {
+ return File::Spec->catdir(@basedir, @{ $test_suite_override_dirs{$dirname} });
+ } else {
+ return;
+ }
+
+}
+
+sub _get_env_overrides {
+ my $dirmap = shift;
+
+ foreach my $key (keys %$dirmap) {
+ if (exists $ENV{$key}) {
+ $dirmap->{$key} = $ENV{$key};
+ print "Setting $key from environment\n";
+ }
+ }
+}
+
+sub _get_argv_overrides {
+ my $dirmap = shift;
+
+ my @new_argv = ();
+ for (my $i = 0; $i <= $#ARGV; $i++) {
+ if ($ARGV[$i] =~ /^([^=]+)=([^=]+)$/ and exists $dirmap->{$1}) {
+ $dirmap->{$1} = $2;
+ } else {
+ push @new_argv, $ARGV[$i];
+ }
+ }
+ @ARGV = @new_argv;
+}
+
+sub _strip_destdir {
+ my $dir = shift;
+ $dir =~ s/^\$\(DESTDIR\)//;
+ return $dir;
+}
+
+sub _add_destdir {
+ my $dirmap = shift;
+
+ foreach my $key (keys %$dirmap) {
+ $dirmap->{$key} = '$(DESTDIR)'.$dirmap->{$key};
+ }
+}
+
+sub display_configuration {
+ my $config = shift;
+ my $dirmap = shift;
+ print "\n\nKoha will be installed with the following configuration parameters:\n\n";
+ foreach my $key (sort keys %$config) {
+ print sprintf("%-25.25s%s\n", $key, $config->{$key});
+ }
+
+ print "\nand in the following directories:\n\n";
+ foreach my $key (sort keys %$dirmap) {
+ print sprintf("%-25.25s%s\n", $key, $dirmap->{$key});
+ }
+ print "\n\nTo change any configuration setting, please run\n";
+ print "perl Makefile.PL again. To override one of the target\n";
+ print "directories, you can do so on the command line like this:\n";
+ print "\nperl Makefile.PL PERL_MODULE_DIR=/usr/share/perl/5.8\n\n";
+ print "You can also set different default values for parameters\n";
+ print "or override directory locations by using environment variables.\n";
+ print "\nFor example:\n\n";
+ print "export DB_USER=my_koha\n";
+ print "perl Makefile.PL\n";
+ print "\nor\n\n";
+ print "DB_USER=my_koha DOC_DIR=/usr/local/info perl Makefile.PL\n\n";
+ print "If installing on a Win32 platform, be sure to use:\n";
+ print "'dmake -x MAXLINELENGTH=300000'\n\n";
+}
+
+=head2 find_zebra
+
+Attempt to find Zebra - check user's PATH and
+a few other directories for zebrasrv and zebraidx.
+
+FIXME: doesn't handle Win32
=cut
- if ((-f $src) && ($src !~ /(\s)/)) {
- $result{$src} = '$(INST_LIBDIR)/koha/templates/'.$src;
+
+sub find_zebra {
+ my @search_dirs = map {
+ my $abs = File::Spec->rel2abs($_);
+ my ($toss, $directories);
+ ($toss, $directories, $toss) = File::Spec->splitpath($abs, 1);
+ $directories;
+ } split /:/, $ENV{PATH};
+ push @search_dirs, qw(/usr/local/bin /opt/local/bin /usr/bin);
+ my @zebrasrv_dirs = grep { -x File::Spec->catpath('', $_, 'zebrasrv') } @search_dirs;
+ return unless @zebrasrv_dirs;
+ # verify that directory that contains zebrasrv also contains zebraidx
+ foreach my $dir (@zebrasrv_dirs) {
+ return $dir if -x File::Spec->catpath('', $dir, 'zebraidx');
+ }
+ return;
+}
+
+package MY;
+
+# This will have to be reworked in order to accommodate Win32...
+
+sub test {
+ my $self = shift;
+ my $test = $self->SUPER::test(@_);
+ $test =~ s!\$\(INST_LIB\)!blib/PERL_MODULE_DIR!g;
+
+ # set KOHA_CONF
+ $test =~ s!\$\(FULLPERLRUN\)!KOHA_CONF=blib/KOHA_CONF_DIR/koha-conf.xml \$(FULLPERLRUN)!g;
+ return $test;
+}
+
+sub install {
+ my $self = shift;
+ my $install = "";
+ # NOTE: we're *not* doing this: my $install = $self->SUPER::install(@_);
+ # This means that we're completely overriding EU::MM's default
+ # installation and uninstallation targets.
+
+# If installation is on Win32, we need to do permissions different from *nix
+ if ( $^O =~ /darwin|linux|cygwin|freebsd|solaris/ ) { # this value needs to be verified for each platform and modified accordingly
+ foreach my $key (sort keys %$target_directories) {
+ $install .= qq(
+KOHA_INST_$key = blib/$key
+KOHA_DEST_$key = $target_directories->{$key}
+) unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
+ }
+ $install .= qq(
+install :: all install_koha set_koha_ownership set_koha_permissions warn_koha_env_vars
+\t\$(NOECHO) \$(NOOP)
+);
+ $install .= "install_koha ::\n";
+ $install .= "\t\$(NOECHO) umask 022; \$(MOD_INSTALL) \\\n";
+ foreach my $key (sort keys %$target_directories) {
+ $install .= "\t\t\$(KOHA_INST_$key) \$(KOHA_DEST_$key) \\\n"
+ unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
+ }
+ $install .= "\t\t\$(INST_MAN1DIR) \$(DESTINSTALLMAN1DIR) \\\n";
+ $install .= "\t\t\$(INST_MAN3DIR) \$(DESTINSTALLMAN3DIR)\n";
+
+ $install .= "\n";
+ $install .= "set_koha_ownership ::\n";
+# Do not try to change ownership if DESTDIR is set
+ if ($config{'INSTALL_MODE'} eq 'standard' and $config{'KOHA_USER'} ne "root") {
+ foreach my $key (sort keys %$target_directories) {
+ $install .= "\t\$(NOECHO) if test -z \"\$(DESTDIR)\"; then chown -R $config{'KOHA_USER'}:$config{'KOHA_GROUP'} \$(KOHA_DEST_$key); fi\n"
+ unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
+ }
+ } else {
+ $install .= "\t\t\$(NOECHO) \$(NOOP)\n\n";
+ }
+
+ $install .= "\n";
+ $install .= "set_koha_permissions ::\n";
+ # This is necessary because EU::MM installs files
+ # as either 0444 or 0555, and we want the owner
+ # of Koha's files to have write permission by default.
+ foreach my $key (sort keys %$target_directories) {
+ $install .= "\t\$(NOECHO) chmod -R u+w \$(KOHA_DEST_$key)\n"
+ unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
+ }
+ }
+ elsif ($^O eq 'MSWin32' ) { # On Win32, the install probably needs to be done under the user account koha will be running as...
+ # We can attempt some creative things with command line utils such as CACLS which allows permission
+ # management from Win32 cmd.exe, but permissions really only apply to NTFS.
+ foreach my $key (sort keys %$target_directories) {
+ $install .= qq(
+KOHA_INST_$key = blib/$key
+KOHA_DEST_$key = $target_directories->{$key}
+) unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
+ }
+ $install .= qq(
+install :: all install_koha warn_koha_env_vars
+\t\$(NOECHO) \$(NOOP)
+);
+ $install .= "install_koha ::\n";
+ $install .= "\t\$(MOD_INSTALL) \\\n";
+ foreach my $key (sort keys %$target_directories) {
+ $install .= "\t\t\$(KOHA_INST_$key) \$(KOHA_DEST_$key) \\\n"
+ unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
}
}
-
-=pod
+ $install .= "\n";
+
+ $install .= "warn_koha_env_vars ::\n";
+ $install .= "\t\$(NOECHO) \$(ECHO)\n";
+ $install .= "\t\$(NOECHO) \$(ECHO) Koha\\'s files have now been installed. \n";
+ $install .= "\t\$(NOECHO) \$(ECHO)\n";
+ $install .= "\t\$(NOECHO) \$(ECHO) In order to use Koha\\'s command-line batch jobs,\n";
+ $install .= "\t\$(NOECHO) \$(ECHO) you should set the following environment variables:\n";
+ $install .= "\t\$(NOECHO) \$(ECHO)\n";
+ $install .= "\t\$(NOECHO) \$(ECHO) export KOHA_CONF=\$(KOHA_DEST_KOHA_CONF_DIR)/koha-conf.xml\n";
+ $install .= "\t\$(NOECHO) \$(ECHO) export PERL5LIB=$target_directories->{'PERL_MODULE_DIR'}\n";
+ $install .= "\t\$(NOECHO) \$(ECHO)\n";
+ $install .= "\t\$(NOECHO) \$(ECHO) For other post-installation tasks, please consult the README.\n";
+ $install .= "\t\$(NOECHO) \$(ECHO)\n";
+
+ if ($config{'INSTALL_ZEBRA'} eq "yes") {
+ $install .= _update_zebra_conf_target();
+ }
-etc files are copied to /usr/share/koha/etc/
+ $install .= upgrade();
+
+ return $install;
+}
+
+=head2 _update_zebra_conf_target
+
+Add an installation target for updating
+Zebra's configuration files.
=cut
- # Misc etc to koha/etc
- foreach my $src (glob("etc/zebradb/*/*/*"),glob("etc/zebradb/*/*"),glob("etc/zebradb/*"),glob("etc/*")) {
- if (-f $src) {
- $result{$src} = '$(INST_LIBDIR)/'.$src;
- }
+
+sub _update_zebra_conf_target {
+
+ my $target = "\nupdate_zebra_conf ::\n";
+ $target .= "\tumask 022; \$(MOD_INSTALL) \\\n";
+ $target .= "\t\t\$(KOHA_INST_ZEBRA_CONF_DIR) \$(KOHA_DEST_ZEBRA_CONF_DIR) \n";
+ $target .= "\t\$(NOECHO) chmod -R u+w \$(KOHA_DEST_ZEBRA_CONF_DIR)\n" unless $^O eq "MSWin32";
+ $target .= "\tumask 022; \$(MOD_INSTALL) \\\n";
+ $target .= "\t\t\$(KOHA_INST_PAZPAR2_CONF_DIR) \$(KOHA_DEST_PAZPAR2_CONF_DIR) \n";
+ $target .= "\t\$(NOECHO) chmod -R u+w \$(KOHA_DEST_PAZPAR2_CONF_DIR)\n" unless $^O eq "MSWin32";
+
+ return $target;
+}
+
+sub upgrade {
+ my $upgrade = "";
+
+ my $backup_suffix;
+ if (exists $install_log_values{'KOHA_INSTALLED_VERSION'}) {
+ my $version = $install_log_values{'KOHA_INSTALLED_VERSION'};
+ $version =~ s/\./_/g;
+ $backup_suffix = "_koha_$version";
+ } else {
+ $backup_suffix = "_upgrade_backup";
+ }
+
+ $upgrade .= qq/
+MOD_BACKUP = \$(ABSPERLRUN) -Minstall_misc::UpgradeBackup -e 'backup_changed_files({\@ARGV}, '$backup_suffix', '\''\$(VERBINST)'\'', '\''\$(UNINST)'\'');' --
+
+upgrade :: make_upgrade_backup install
+\t\$(NOECHO) \$(NOOP)
+make_upgrade_backup ::
+\t\$(NOECHO) umask 022; \$(MOD_BACKUP) \\
+/;
+ foreach my $key (qw/KOHA_CONF_DIR INTRANET_TMPL_DIR INTRANET_WWW_DIR OPAC_TMPL_DIR OPAC_WWW_DIR
+ PAZPAR2_CONF_DIR ZEBRA_CONF_DIR/) {
+ $upgrade .= "\t\t\$(KOHA_INST_$key) \$(KOHA_DEST_$key) \\\n"
+ unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or
+ exists $skip_directories->{$key} or
+ not exists $target_directories->{$key};
+ }
+ $upgrade =~ s/\\\n$/\n/;
+
+ return $upgrade;
+}
+
+sub postamble {
+ # put directory mappings into Makefile
+ # so that Make will export as environment
+ # variables -- this is for the use of
+ # rewrite-confg.PL
+
+ # quote '$' in the two password parameters
+ my %config = %config;
+ $config{'DB_PASS'} =~ s/\$/\$\$/g;
+ if ($config{'INSTALL_ZEBRA'} eq "yes") {
+ $config{'ZEBRA_PASS'} =~ s/\$/\$\$/g;
+ }
+
+ my $env;
+ # Hereagain, we must alter syntax per platform...
+ if ( $^O eq 'MSWin32' ) {
+ # NOTE: it is imperative that there be no whitespaces in ENV=value...
+ $env = join("\n", map { "__${_}__=$target_directories->{$_}" } keys %$target_directories);
+ $env .= "\n\n";
+ $env .= join("\n", map { "__${_}__=$config{$_}" } keys %config);
+ }
+ else {
+ $env = join("\n", map { "export __${_}__ := $target_directories->{$_}" } keys %$target_directories);
+ $env .= "\n\n";
+ $env .= join("\n", map { "export __${_}__ := $config{$_}" } keys %config);
}
-
- # set up zebra with the appropriate language and marc config
- $result{"etc/zebradb/lang_defs/sort-string-$lang_value.chr"} = '$(INST_LIBDIR)/etc/zebradb/etc/sort-string-utf.chr';
- $result{"etc/zebradb/marc_defs/biblios-$marc_value.abs"} = '$(INST_LIBDIR)/etc/zebradb/biblios/etc/record.abs';
- $result{"etc/zebradb/marc_defs/authorities-$marc_value.abs"} = '$(INST_LIBDIR)/etc/zebradb/authorities/etc/record.abs';
- return \%result;
+
+ if ( $config{'RUN_DATABASE_TESTS'} eq 'yes' ) {
+ if ( open( my $confhandle, '>', 't/test-config.txt' ) ) {
+ print $confhandle "# This configuration file lets the t/Makefile prepare a test koha-conf.xml file.\n";
+ print $confhandle "# It is generated by the top-level Makefile.PL.\n";
+ print $confhandle "# It is separate from the standard koha-conf.xml so that you can edit this by hand and test with different configurations.\n";
+
+ # these directories will be relocated to the 't' directory
+ foreach my $dirname ( keys %$target_directories ) {
+ my $dir = main::_strip_destdir( $target_directories->{$dirname} );
+ if ( exists $test_suite_override_dirs{$dirname} ) {
+ $dir = main::get_test_dir($dirname);
+ }
+ print $confhandle "$dirname = $dir\n"
+ }
+ print $confhandle "\n";
+
+ print $confhandle join( "\n", map { "$_ = $config{$_}" } keys( %config ) ), "\n";
+ close( $confhandle );
+ } else {
+ warn 'unable to open conf file for database dependent tests: $!';
+ }
+
+ }
+ return "$env\n";
}
+
__END__
ExtUtils::MakeMaker(3)
-=head1 AUTHOR
+=head1 AUTHORS
MJ Ray mjr at phonecoop.coop
+Galen Charlton galen.charlton at liblime.com
=cut
-
+FIXME: deal with .htaccess
projects / koha.git / blobdiff