http://code.google.com/p/rc-switch/

[Arduino] / libraries / RCSwitch / .svn / pristine / 66 / 66df6b64da2e53c6da047bf7df391bf8f2fa6fd7.svn-base

diff --git a/libraries/RCSwitch/.svn/pristine/66/66df6b64da2e53c6da047bf7df391bf8f2fa6fd7.svn-base b/libraries/RCSwitch/.svn/pristine/66/66df6b64da2e53c6da047bf7df391bf8f2fa6fd7.svn-base
new file mode 100644 (file)
index 0000000..0441276
--- /dev/null
+++ b/libraries/RCSwitch/.svn/pristine/66/66df6b64da2e53c6da047bf7df391bf8f2fa6fd7.svn-base
@@ -0,0 +1,56 @@
+/*
+  Example for different sending methods
+  
+  http://code.google.com/p/rc-switch/
+*/
+
+#include <RCSwitch.h>
+
+RCSwitch mySwitch = RCSwitch();
+
+void setup() {
+
+  Serial.begin(9600);
+  
+  // Transmitter is connected to Arduino Pin #10  
+  mySwitch.enableTransmit(10);
+
+  // Optional set pulse length.
+  // mySwitch.setPulseLength(320);
+  
+  // Optional set protocol (default is 1, will work for most outlets)
+  // mySwitch.setProtocol(2);
+  
+  // Optional set number of transmission repetitions.
+  // mySwitch.setRepeatTransmit(15);
+  
+}
+
+void loop() {
+
+  /* See Example: TypeA_WithDIPSwitches */
+  mySwitch.switchOn("11111", "00010")
+  delay(1000);
+  mySwitch.switchOn("11111", "00010")
+  deleay(1000);
+
+  /* Same switch as above, but using decimal code */
+  mySwitch.send(5393, 24);
+  delay(1000);  
+  mySwitch.send(5396, 24);
+  delay(1000);  
+
+  /* Same switch as above, but using binary code */
+  mySwitch.send("000000000001010100010001");
+  delay(1000);  
+  mySwitch.send("000000000001010100010100");
+  delay(1000);
+
+  /* Same switch as above, but tri-state code */ 
+  mySwitch.sendTriState("00000FFF0F0F");
+  delay(1000);  
+  mySwitch.sendTriState("00000FFF0FF0");
+  delay(1000);
+
+  delay(20000);
+}