vty_out(vty, " cell selection state: %s",
cs_state_names[ms->cellsel.state]);
if (ms->rrlayer.state == GSM48_RR_ST_IDLE && ms->cellsel.selected)
- vty_out(vty, " (ARFCN %d)", ms->cellsel.sel_arfcn);
+ vty_out(vty, " (ARFCN %s)",
+ gsm_print_arfcn(ms->cellsel.sel_arfcn));
vty_out(vty, "%s", VTY_NEWLINE);
vty_out(vty, " radio ressource layer state: %s%s",
gsm48_rr_state_names[ms->rrlayer.state], VTY_NEWLINE);
return CMD_SUCCESS;
}
-DEFUN(show_cell_si, show_cell_si_cmd, "show cell MS_NAME <0-1023>",
+DEFUN(show_cell_si, show_cell_si_cmd, "show cell MS_NAME <0-1023> [pcs]",
SHOW_STR "Display information about received cell\n"
- "Name of MS (see \"show ms\")\nRadio frequency number")
+ "Name of MS (see \"show ms\")\nRadio frequency number\n"
+ "Given frequency is PCS band (1900) rather than DCS band.")
{
struct osmocom_ms *ms;
- int i;
struct gsm48_sysinfo *s;
+ uint16_t arfcn = atoi(argv[1]);
ms = get_ms(argv[0], vty);
if (!ms)
return CMD_WARNING;
- i = atoi(argv[1]);
- if (i < 0 || i > 1023) {
- vty_out(vty, "Given ARFCN '%s' not in range (0..1023)%s",
- argv[1], VTY_NEWLINE);
- return CMD_WARNING;
+ if (argc > 2) {
+ if (arfcn < 512 || arfcn > 810) {
+ vty_out(vty, "Given ARFCN not in PCS band%s",
+ VTY_NEWLINE);
+ return CMD_WARNING;
+ }
+ arfcn |= ARFCN_PCS;
}
- s = ms->cellsel.list[i].sysinfo;
+
+ s = ms->cellsel.list[arfcn2index(arfcn)].sysinfo;
if (!s) {
vty_out(vty, "Given ARFCN '%s' has no sysinfo available%s",
argv[1], VTY_NEWLINE);
return CMD_SUCCESS;
}
- gsm48_sysinfo_dump(s, i, print_vty, vty);
+ gsm48_sysinfo_dump(s, arfcn, print_vty, vty, ms->settings.freq_map);
return CMD_SUCCESS;
}
else
vty_out(vty, " no simulated-delay%s", VTY_NEWLINE);
if (set->stick)
- vty_out(vty, " stick %d%s", set->stick_arfcn,
+ vty_out(vty, " stick %d%s%s", set->stick_arfcn & 1023,
+ (set->stick_arfcn & ARFCN_PCS) ? " pcs" : "",
VTY_NEWLINE);
else
vty_out(vty, " no stick%s", VTY_NEWLINE);
SUP_WRITE(p_gsm, "p-gsm");
SUP_WRITE(e_gsm, "e-gsm");
SUP_WRITE(r_gsm, "r-gsm");
+ SUP_WRITE(pcs, "gsm-850");
+ SUP_WRITE(gsm_480, "gsm-480");
+ SUP_WRITE(gsm_450, "gsm-450");
SUP_WRITE(dcs, "dcs");
- vty_out(vty, " class-900 %d%s", set->class_900, VTY_NEWLINE);
- vty_out(vty, " class-dcs %d%s", set->class_dcs, VTY_NEWLINE);
+ SUP_WRITE(pcs, "pcs");
+ if (sup->r_gsm || sup->e_gsm || sup->p_gsm)
+ vty_out(vty, " class-900 %d%s", set->class_900, VTY_NEWLINE);
+ if (sup->gsm_850)
+ vty_out(vty, " class-850 %d%s", set->class_850, VTY_NEWLINE);
+ if (sup->gsm_480 || sup->gsm_450)
+ vty_out(vty, " class-400 %d%s", set->class_400, VTY_NEWLINE);
+ if (sup->dcs)
+ vty_out(vty, " class-dcs %d%s", set->class_dcs, VTY_NEWLINE);
+ if (sup->pcs)
+ vty_out(vty, " class-pcs %d%s", set->class_pcs, VTY_NEWLINE);
switch (set->ch_cap) {
case GSM_CAP_SDCCH:
vty_out(vty, " channel-capability sdcch%s", VTY_NEWLINE);
return CMD_SUCCESS;
}
-DEFUN(cfg_ms_stick, cfg_ms_stick_cmd, "stick <0-1023>",
- "Stick to the given cell\nARFCN of the cell to stick to")
+DEFUN(cfg_ms_stick, cfg_ms_stick_cmd, "stick <0-1023> [pcs]",
+ "Stick to the given cell\nARFCN of the cell to stick to\n"
+ "Given frequency is PCS band (1900) rather than DCS band.")
{
struct osmocom_ms *ms = vty->index;
struct gsm_settings *set = &ms->settings;
+ uint16_t arfcn = atoi(argv[0]);
+ if (argc > 1) {
+ if (arfcn < 512 || arfcn > 810) {
+ vty_out(vty, "Given ARFCN not in PCS band%s",
+ VTY_NEWLINE);
+ return CMD_WARNING;
+ }
+ arfcn |= ARFCN_PCS;
+ }
set->stick = 1;
- set->stick_arfcn = atoi(argv[0]);
+ set->stick_arfcn = arfcn;
return CMD_SUCCESS;
}
"R-GSM (850)", 1);
SUP_EN(cfg_ms_sup_dcs, cfg_ms_sup_dcs_cmd, dcs, "dcs", "DCS (1800)", 0);
SUP_DI(cfg_ms_sup_no_dcs, cfg_ms_sup_no_dcs_cmd, dcs, "dcs", "DCS (1800)", 0);
+SUP_EN(cfg_ms_sup_gsm_850, cfg_ms_sup_gsm_850_cmd, gsm_850, "gsm-850",
+ "GSM 850", 0);
+SUP_DI(cfg_ms_sup_no_gsm_850, cfg_ms_sup_no_gsm_850_cmd, gsm_850, "gsm-850",
+ "GSM 850", 0);
+SUP_EN(cfg_ms_sup_pcs, cfg_ms_sup_pcs_cmd, pcs, "pcs", "PCS (1900)", 0);
+SUP_DI(cfg_ms_sup_no_pcs, cfg_ms_sup_no_pcs_cmd, pcs, "pcs", "PCS (1900)", 0);
+SUP_EN(cfg_ms_sup_gsm_480, cfg_ms_sup_gsm_480_cmd, gsm_480, "gsm-480",
+ "GSM 480", 0);
+SUP_DI(cfg_ms_sup_no_gsm_480, cfg_ms_sup_no_gsm_480_cmd, gsm_480, "gsm-480",
+ "GSM 480", 0);
+SUP_EN(cfg_ms_sup_gsm_450, cfg_ms_sup_gsm_450_cmd, gsm_450, "gsm-450",
+ "GSM 450", 0);
+SUP_DI(cfg_ms_sup_no_gsm_450, cfg_ms_sup_no_gsm_450_cmd, gsm_450, "gsm-450",
+ "GSM 450", 0);
DEFUN(cfg_ms_sup_class_900, cfg_ms_sup_class_900_cmd, "class-900 (1|2|3|4|5)",
- "Select power class for GSM 850/900\n"
+ "Select power class for GSM 900\n"
"20 Watts\n"
"8 Watts\n"
"5 Watts\n"
set->class_900 = atoi(argv[0]);
if (set->class_900 < sup->class_900 && !vty_reading)
- vty_out(vty, "You selected an higher class than supported "
+ vty_out(vty, "Note: You selected a higher class than supported "
+ " by hardware!%s", VTY_NEWLINE);
+
+ return CMD_SUCCESS;
+}
+
+DEFUN(cfg_ms_sup_class_850, cfg_ms_sup_class_850_cmd, "class-850 (1|2|3|4|5)",
+ "Select power class for GSM 850\n"
+ "20 Watts\n"
+ "8 Watts\n"
+ "5 Watts\n"
+ "2 Watts\n"
+ "0.8 Watts")
+{
+ struct osmocom_ms *ms = vty->index;
+ struct gsm_settings *set = &ms->settings;
+ struct gsm_support *sup = &ms->support;
+
+ set->class_850 = atoi(argv[0]);
+
+ if (set->class_850 < sup->class_850 && !vty_reading)
+ vty_out(vty, "Note: You selected a higher class than supported "
+ " by hardware!%s", VTY_NEWLINE);
+
+ return CMD_SUCCESS;
+}
+
+DEFUN(cfg_ms_sup_class_400, cfg_ms_sup_class_400_cmd, "class-400 (1|2|3|4|5)",
+ "Select power class for GSM 400 (480 and 450)\n"
+ "20 Watts\n"
+ "8 Watts\n"
+ "5 Watts\n"
+ "2 Watts\n"
+ "0.8 Watts")
+{
+ struct osmocom_ms *ms = vty->index;
+ struct gsm_settings *set = &ms->settings;
+ struct gsm_support *sup = &ms->support;
+
+ set->class_400 = atoi(argv[0]);
+
+ if (set->class_400 < sup->class_400 && !vty_reading)
+ vty_out(vty, "Note: You selected a higher class than supported "
" by hardware!%s", VTY_NEWLINE);
return CMD_SUCCESS;
if (((set->class_dcs + 1) & 3) < ((sup->class_dcs + 1) & 3)
&& !vty_reading)
- vty_out(vty, "You selected an higher class than supported "
+ vty_out(vty, "Note: You selected a higher class than supported "
+ " by hardware!%s", VTY_NEWLINE);
+
+ return CMD_SUCCESS;
+}
+
+DEFUN(cfg_ms_sup_class_pcs, cfg_ms_sup_class_pcs_cmd, "class-pcs (1|2|3)",
+ "Select power class for PCS 1900\n"
+ "1 Watt\n"
+ "0.25 Watts\n"
+ "4 Watts")
+{
+ struct osmocom_ms *ms = vty->index;
+ struct gsm_settings *set = &ms->settings;
+ struct gsm_support *sup = &ms->support;
+
+ set->class_pcs = atoi(argv[0]);
+
+ if (((set->class_pcs + 1) & 3) < ((sup->class_pcs + 1) & 3)
+ && !vty_reading)
+ vty_out(vty, "Note: You selected a higher class than supported "
" by hardware!%s", VTY_NEWLINE);
return CMD_SUCCESS;
install_element(SUPPORT_NODE, &cfg_ms_sup_no_r_gsm_cmd);
install_element(SUPPORT_NODE, &cfg_ms_sup_dcs_cmd);
install_element(SUPPORT_NODE, &cfg_ms_sup_no_dcs_cmd);
+ install_element(SUPPORT_NODE, &cfg_ms_sup_gsm_850_cmd);
+ install_element(SUPPORT_NODE, &cfg_ms_sup_no_gsm_850_cmd);
+ install_element(SUPPORT_NODE, &cfg_ms_sup_pcs_cmd);
+ install_element(SUPPORT_NODE, &cfg_ms_sup_no_pcs_cmd);
+ install_element(SUPPORT_NODE, &cfg_ms_sup_gsm_480_cmd);
+ install_element(SUPPORT_NODE, &cfg_ms_sup_no_gsm_480_cmd);
+ install_element(SUPPORT_NODE, &cfg_ms_sup_gsm_450_cmd);
+ install_element(SUPPORT_NODE, &cfg_ms_sup_no_gsm_450_cmd);
install_element(SUPPORT_NODE, &cfg_ms_sup_class_900_cmd);
install_element(SUPPORT_NODE, &cfg_ms_sup_class_dcs_cmd);
+ install_element(SUPPORT_NODE, &cfg_ms_sup_class_850_cmd);
+ install_element(SUPPORT_NODE, &cfg_ms_sup_class_pcs_cmd);
+ install_element(SUPPORT_NODE, &cfg_ms_sup_class_400_cmd);
install_element(SUPPORT_NODE, &cfg_ms_sup_ch_cap_cmd);
install_element(SUPPORT_NODE, &cfg_ms_sup_full_v1_cmd);
install_element(SUPPORT_NODE, &cfg_ms_sup_no_full_v1_cmd);
projects / osmocom-bb.git / blobdiff