Revert "Revert "and added files""

[bcm963xx.git] / userapps / opensource / ipsec-tools / rpm / suse / racoon.init

diff --git a/userapps/opensource/ipsec-tools/rpm/suse/racoon.init b/userapps/opensource/ipsec-tools/rpm/suse/racoon.init
new file mode 100755 (executable)
index 0000000..15321ce
--- /dev/null
+++ b/userapps/opensource/ipsec-tools/rpm/suse/racoon.init
@@ -0,0 +1,168 @@
+#! /bin/sh
+# Copyright (c) 2001-2002 SuSE GmbH Nuernberg, Germany.
+#
+# Author: Michal Ludvig <feedback@suse.de>, 2004
+#
+# /etc/init.d/ipsec-tools
+#   and its symbolic link
+# /usr/sbin/rcipsec-tools
+#
+# System startup script for the IPsec key management daemon
+#
+### BEGIN INIT INFO
+# Provides:       racoon
+# Required-Start: $remote_fs $named $syslog
+# Required-Stop:  $remote_fs $named $syslog
+# Default-Start:  3 5
+# Default-Stop:   0 1 2 6
+# Description:    IPsec key management daemon
+### END INIT INFO
+
+SETKEY="IPsec policies"
+SETKEY_BIN=/usr/sbin/setkey
+SETKEY_CONF=/etc/racoon/setkey.conf
+
+RACOON="IPsec IKE daemon (racoon)"
+RACOON_BIN=/usr/sbin/racoon
+RACOON_CONF=/etc/racoon/racoon.conf
+RACOON_PIDFILE=/var/run/racoon.pid
+
+test -x $SETKEY_BIN || exit 5
+test -x $RACOON_BIN || exit 5
+
+test -f /etc/sysconfig/racoon && . /etc/sysconfig/racoon
+
+# Shell functions sourced from /etc/rc.status:
+#      rc_check         check and set local and overall rc status
+#      rc_status        check and set local and overall rc status
+#      rc_status -v     ditto but be verbose in local rc status
+#      rc_status -v -r  ditto and clear the local rc status
+#      rc_failed        set local and overall rc status to failed
+#      rc_failed <num>  set local and overall rc status to <num><num>
+#      rc_reset         clear local rc status (overall remains)
+#      rc_exit          exit appropriate to overall rc status
+. /etc/rc.status
+
+# First reset status of this service
+rc_reset
+
+# Return values acc. to LSB for all commands but status:
+# 0 - success
+# 1 - generic or unspecified error
+# 2 - invalid or excess argument(s)
+# 3 - unimplemented feature (e.g. "reload")
+# 4 - insufficient privilege
+# 5 - program is not installed
+# 6 - program is not configured
+# 7 - program is not running
+# 
+# Note that starting an already running service, stopping
+# or restarting a not-running service as well as the restart
+# with force-reload (in case signalling is not supported) are
+# considered a success.
+
+case "$1" in
+    start)
+       # Setting up SPD policies is not required.
+       if [ -f $SETKEY_CONF ]; then
+               echo -n "Setting up $SETKEY"
+               $SETKEY_BIN $SETKEY_OPTIONS -f $SETKEY_CONF
+               rc_status -v
+               rc_reset
+       fi
+       
+       echo -n "Starting $RACOON "
+       ## If there is no conf file, skip starting of ddtd
+       ## and return with "program not configured"
+       if ! [ -f $RACOON_CONF ]; then
+               echo -e -n "... no configuration file found"
+               rc_status -s
+               # service is not configured
+               rc_failed 6
+               rc_exit
+       fi
+
+       # startproc should return 0, even if service is 
+       # already running to match LSB spec.
+       startproc $RACOON_BIN $RACOON_OPTIONS -f $RACOON_CONF
+       rc_status -v
+       ;;
+
+    stop)
+       echo -n "Shutting down $RACOON"
+       ## Stop daemon with killproc(8) and if this fails
+       ## set echo the echo return value.
+
+       killproc -p $RACOON_PIDFILE -TERM $RACOON_BIN
+
+       # Remember status and be verbose
+       rc_status -v
+       rc_reset
+
+       # Flush SPD policies if required
+       if [ -n "$SETKEY_FLUSH_OPTIONS" ]; then
+               echo -n "Flushing $SETKEY"
+               $SETKEY_BIN $SETKEY_FLUSH_OPTIONS
+               rc_status -v
+       fi
+       ;;
+    try-restart)
+       ## Stop the service and if this succeeds (i.e. the 
+       ## service was running before), start it again.
+       $0 stop  &&  $0 start
+
+       # Remember status and be quiet
+       rc_status
+       ;;
+    restart)
+       ## Stop the service and regardless of whether it was
+       ## running or not, start it again.
+       $0 stop
+       $0 start
+
+       # Remember status and be quiet
+       rc_status
+       ;;
+    force-reload)
+       ## Signal the daemon to reload its config. Most daemons
+       ## do this on signal 1 (SIGHUP).
+       ## If it does not support it, restart.
+
+       echo -n "Reload service $RACOON"
+       killproc -p $RACOON_PIDFILE -HUP $RACOON_BIN
+       rc_status -v
+       ;;
+    reload)
+       ## Like force-reload, but if daemon does not support
+       ## signalling, do nothing (!)
+
+       echo -n "Reload service $RACOON"
+       killproc -p $RACOON_PIDFILE -HUP $RACOON_BIN
+       rc_status -v
+       ;;
+    status)
+       echo -n "Checking for $RACOON: "
+       ## Check status with checkproc(8), if process is running
+       ## checkproc will return with exit status 0.
+
+       # Status has a slightly different for the status command:
+       # 0 - service running
+       # 1 - service dead, but /var/run/  pid  file exists
+       # 2 - service dead, but /var/lock/ lock file exists
+       # 3 - service not running
+
+       checkproc -p $RACOON_PIDFILE $RACOON_BIN
+       rc_status -v
+       ;;
+    probe)
+       ## Optional: Probe for the necessity of a reload,
+       ## give out the argument which is required for a reload.
+
+       test "$RACOON_CONF" -nt "$RACOON_PIDFILE" && echo reload
+       ;;
+    *)
+       echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
+       exit 1
+       ;;
+esac
+rc_exit