--- /dev/null
+SNMP-PROXY-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY,
+ OBJECT-TYPE,
+ snmpModules
+ FROM SNMPv2-SMI
+
+ RowStatus,
+ StorageType
+ FROM SNMPv2-TC
+
+ SnmpEngineID,
+ SnmpAdminString
+ FROM SNMP-FRAMEWORK-MIB
+
+ SnmpTagValue
+ FROM SNMP-TARGET-MIB
+
+ MODULE-COMPLIANCE,
+ OBJECT-GROUP
+ FROM SNMPv2-CONF;
+
+snmpProxyMIB MODULE-IDENTITY
+ LAST-UPDATED "200210140000Z"
+ ORGANIZATION "IETF SNMPv3 Working Group"
+ CONTACT-INFO
+ "WG-email: snmpv3@lists.tislabs.com
+ Subscribe: majordomo@lists.tislabs.com
+ In message body: subscribe snmpv3
+
+ Co-Chair: Russ Mundy
+ Network Associates Laboratories
+ Postal: 15204 Omega Drive, Suite 300
+ Rockville, MD 20850-4601
+ USA
+ EMail: mundy@tislabs.com
+ Phone: +1 301-947-7107
+
+ Co-Chair: David Harrington
+ Enterasys Networks
+ Postal: 35 Industrial Way
+ P. O. Box 5004
+ Rochester, New Hampshire 03866-5005
+ USA
+ EMail: dbh@enterasys.com
+ Phone: +1 603-337-2614
+
+ Co-editor: David B. Levi
+ Nortel Networks
+ Postal: 3505 Kesterwood Drive
+ Knoxville, Tennessee 37918
+ EMail: dlevi@nortelnetworks.com
+ Phone: +1 865 686 0432
+
+ Co-editor: Paul Meyer
+ Secure Computing Corporation
+ Postal: 2675 Long Lake Road
+ Roseville, Minnesota 55113
+ EMail: paul_meyer@securecomputing.com
+ Phone: +1 651 628 1592
+
+ Co-editor: Bob Stewart
+ Retired"
+ DESCRIPTION
+ "This MIB module defines MIB objects which provide
+ mechanisms to remotely configure the parameters
+ used by a proxy forwarding application.
+
+ Copyright (C) The Internet Society (2002). This
+ version of this MIB module is part of RFC 3413;
+ see the RFC itself for full legal notices.
+ "
+ REVISION "200210140000Z" -- 14 October 2002
+ DESCRIPTION "Clarifications, published as
+ RFC 3413."
+ REVISION "199808040000Z" -- 4 August 1998
+ DESCRIPTION "Clarifications, published as
+ RFC 2573."
+ REVISION "199707140000Z" -- 14 July 1997
+ DESCRIPTION "The initial revision, published as RFC2273."
+ ::= { snmpModules 14 }
+
+snmpProxyObjects OBJECT IDENTIFIER ::= { snmpProxyMIB 1 }
+snmpProxyConformance OBJECT IDENTIFIER ::= { snmpProxyMIB 3 }
+
+--
+
+--
+-- The snmpProxyObjects group
+--
+--
+
+snmpProxyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SnmpProxyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table of translation parameters used by proxy forwarder
+ applications for forwarding SNMP messages."
+ ::= { snmpProxyObjects 2 }
+
+snmpProxyEntry OBJECT-TYPE
+ SYNTAX SnmpProxyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of translation parameters used by a proxy forwarder
+ application for forwarding SNMP messages.
+
+ Entries in the snmpProxyTable are created and deleted
+ using the snmpProxyRowStatus object."
+ INDEX { IMPLIED snmpProxyName }
+ ::= { snmpProxyTable 1 }
+
+SnmpProxyEntry ::= SEQUENCE {
+ snmpProxyName SnmpAdminString,
+ snmpProxyType INTEGER,
+ snmpProxyContextEngineID SnmpEngineID,
+ snmpProxyContextName SnmpAdminString,
+ snmpProxyTargetParamsIn SnmpAdminString,
+ snmpProxySingleTargetOut SnmpAdminString,
+ snmpProxyMultipleTargetOut SnmpTagValue,
+ snmpProxyStorageType StorageType,
+ snmpProxyRowStatus RowStatus
+}
+
+snmpProxyName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The locally arbitrary, but unique identifier associated
+ with this snmpProxyEntry."
+ ::= { snmpProxyEntry 1 }
+
+snmpProxyType OBJECT-TYPE
+ SYNTAX INTEGER {
+ read(1),
+ write(2),
+ trap(3),
+ inform(4)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of message that may be forwarded using
+ the translation parameters defined by this entry."
+ ::= { snmpProxyEntry 2 }
+
+snmpProxyContextEngineID OBJECT-TYPE
+ SYNTAX SnmpEngineID
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The contextEngineID contained in messages that
+ may be forwarded using the translation parameters
+ defined by this entry."
+ ::= { snmpProxyEntry 3 }
+
+snmpProxyContextName OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The contextName contained in messages that may be
+ forwarded using the translation parameters defined
+ by this entry.
+
+ This object is optional, and if not supported, the
+ contextName contained in a message is ignored when
+ selecting an entry in the snmpProxyTable."
+ ::= { snmpProxyEntry 4 }
+
+snmpProxyTargetParamsIn OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object selects an entry in the snmpTargetParamsTable.
+ The selected entry is used to determine which row of the
+ snmpProxyTable to use for forwarding received messages."
+ ::= { snmpProxyEntry 5 }
+
+snmpProxySingleTargetOut OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object selects a management target defined in the
+ snmpTargetAddrTable (in the SNMP-TARGET-MIB). The
+ selected target is defined by an entry in the
+ snmpTargetAddrTable whose index value (snmpTargetAddrName)
+ is equal to this object.
+
+ This object is only used when selection of a single
+ target is required (i.e. when forwarding an incoming
+ read or write request)."
+ ::= { snmpProxyEntry 6 }
+
+snmpProxyMultipleTargetOut OBJECT-TYPE
+ SYNTAX SnmpTagValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object selects a set of management targets defined
+ in the snmpTargetAddrTable (in the SNMP-TARGET-MIB).
+
+ This object is only used when selection of multiple
+ targets is required (i.e. when forwarding an incoming
+ notification)."
+ ::= { snmpProxyEntry 7 }
+
+snmpProxyStorageType OBJECT-TYPE
+ SYNTAX StorageType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The storage type of this conceptual row.
+ Conceptual rows having the value 'permanent' need not
+ allow write-access to any columnar objects in the row."
+ DEFVAL { nonVolatile }
+ ::= { snmpProxyEntry 8 }
+
+snmpProxyRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row.
+
+ To create a row in this table, a manager must
+
+ set this object to either createAndGo(4) or
+ createAndWait(5).
+
+ The following objects may not be modified while the
+ value of this object is active(1):
+ - snmpProxyType
+ - snmpProxyContextEngineID
+ - snmpProxyContextName
+ - snmpProxyTargetParamsIn
+ - snmpProxySingleTargetOut
+ - snmpProxyMultipleTargetOut"
+ ::= { snmpProxyEntry 9 }
+
+--
+--
+-- Conformance information
+--
+--
+
+snmpProxyCompliances OBJECT IDENTIFIER ::=
+ { snmpProxyConformance 1 }
+snmpProxyGroups OBJECT IDENTIFIER ::=
+ { snmpProxyConformance 2 }
+
+--
+--
+-- Compliance statements
+--
+--
+
+snmpProxyCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for SNMP entities which include
+ a proxy forwarding application."
+ MODULE SNMP-TARGET-MIB
+ MANDATORY-GROUPS { snmpTargetBasicGroup,
+ snmpTargetResponseGroup }
+ MODULE -- This Module
+ MANDATORY-GROUPS { snmpProxyGroup }
+ ::= { snmpProxyCompliances 1 }
+
+snmpProxyGroup OBJECT-GROUP
+ OBJECTS {
+ snmpProxyType,
+ snmpProxyContextEngineID,
+ snmpProxyContextName,
+ snmpProxyTargetParamsIn,
+ snmpProxySingleTargetOut,
+ snmpProxyMultipleTargetOut,
+ snmpProxyStorageType,
+ snmpProxyRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing remote configuration of
+ management target translation parameters for use by
+ proxy forwarder applications."
+ ::= { snmpProxyGroups 3 }
+
+END
projects / bcm963xx.git / blobdiff