add definitions for sciphone G2

diff --git a/src/target/firmware/include/mtk/bpi.h b/src/target/firmware/include/mtk/bpi.h
index 7328c15..8aa8ee5 100644 (file)
--- a/src/target/firmware/include/mtk/bpi.h
+++ b/src/target/firmware/include/mtk/bpi.h
@@ -7,6 +7,8 @@
 
 #define BPI_BUF(n)     (BPI_BUF0 + ((n) * 4))
 
 
 #define BPI_BUF(n)     (BPI_BUF0 + ((n) * 4))
 

+#define MTK_BPI(n)     (n)
+

 enum mtk_bpi_reg {
        BPI_CON         = 0x0000,
        BPI_BUF0        = 0x0004,
 enum mtk_bpi_reg {
        BPI_CON         = 0x0000,
        BPI_BUF0        = 0x0004,

diff --git a/src/target/firmware/include/mtk/mt6235_sciphone_g2.h b/src/target/firmware/include/mtk/mt6235_sciphone_g2.h
new file mode 100644 (file)
index 0000000..74d9e7b
--- /dev/null
+++ b/src/target/firmware/include/mtk/mt6235_sciphone_g2.h
@@ -0,0 +1,38 @@
+#ifndef _SCIPHONE_G2_H
+#define _SCIPHONE_G2_H
+/* Bluelans Sciphone G2 support */
+
+/* Use of the Baseband Parallel Interface by the G2 board */
+#define HB_TX          MTK_BPI(0)
+#define PCS_RX         MTK_BPI(1)
+#define LB_TX          MTK_BPI(2)
+#define PA_EN          MTK_BPI(4)
+#define BAND_SW                MTK_BPI(5)
+#define MODE_PA                MTK_BPI(7)
+#define RF_VCO_EN      MTK_BPI(9)
+
+#define GPIO_GPS_PWR_EN        MTK_GPIO(19)
+#define GPIO_WIFI_EN   MTK_GPIO(20)
+#define GPIO_OP1_EN    MTK_GPIO(22)
+#define GPIO_BT_PWR_EN MTK_GPIO(39)
+#define GPIO_BT_RST    MTK_GPIO(62)
+#define GPIO_USB_CHR_ID        MTK_GPIO(73)
+#define GPIO_FM_SCL    MTK_GPIO(46)
+#define GPIO_FM_SDA    MTK_GPIO(47)
+#define GPIO_GS_SCL    MTK_GPIO(48)
+#define GPIO_GS_SDA    MTK_GPIO(58)
+#define GPIO_GS_EN     MTK_GPIO(26)
+
+#define GPIO_GPS_EINT  MTK_GPIO(42)
+
+#define EINT_HEADSET   MTK_EINT(0)
+#define EINT_BT                MTK_EINT(1)
+#define EINT_GPS2GSM   MTK_EINT(2)
+#define EINT_WIFI      MTK_EINT(3)
+
+#define CLKM_BT_32k    MTK_CLKM(2)
+#define CLKM_WIFI_32k  MTK_CLKM(3)
+#define CLKM_FM_32k    MTK_CLKM(4)
+
+
+#endif /* _SCIPHONE_G2_H */