Sylvain Munaut [Wed, 12 Jan 2011 14:39:25 +0000 (15:39 +0100)]
fw/calypso/dsp: Add comment about meaning of bit 11 of ndb->d_tch_mode
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Steve Markgraf [Tue, 11 Jan 2011 19:03:35 +0000 (20:03 +0100)]
target/simtest: remove delay functions
Signed-off-by: Steve Markgraf <steve@steve-m.de>
Thomas Waldmann [Tue, 11 Jan 2011 18:38:59 +0000 (19:38 +0100)]
fixed typos in comments
Signed-off-by: Steve Markgraf <steve@steve-m.de>
Steve Markgraf [Sat, 8 Jan 2011 19:58:25 +0000 (20:58 +0100)]
documentation: fix some typos
Thanks to Thomas Waldmann who provided this patch
Signed-off-by: Steve Markgraf <steve@steve-m.de>
Andreas Oberritter [Fri, 7 Jan 2011 22:50:04 +0000 (23:50 +0100)]
Fix flash chip detection by using a volatile pointer
* This might be a workaround for a compiler bug
(gcc 4.5.2, binutils 2.21)
Signed-off-by: Andreas Oberritter <obi@saftware.de>
Signed-off-by: Steve Markgraf <steve@steve-m.de>
Steve Markgraf [Wed, 5 Jan 2011 22:48:06 +0000 (23:48 +0100)]
Sylvain Munaut [Mon, 3 Jan 2011 21:19:40 +0000 (22:19 +0100)]
vty: Fix typo testing return value of bind
Thanks to playya__ (Dr. Fred) on IRC for pointing this out
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Steve Markgraf [Sun, 2 Jan 2011 15:54:54 +0000 (16:54 +0100)]
display/st7558: remove delays, since the bug in the i2c driver is fixed
Signed-off-by: Steve Markgraf <steve@steve-m.de>
Christian Vogel [Mon, 4 Oct 2010 18:10:42 +0000 (20:10 +0200)]
Testing for the idle i2c bus was done backwards, we have
to wait for the bit to become 0, not 1.
Steve Markgraf [Sun, 2 Jan 2011 00:36:04 +0000 (01:36 +0100)]
display/td014: add short delay after initializing uwire
This should fix the initialization of the C139/C140 display
Signed-off-by: Steve Markgraf <steve@steve-m.de>
Holger Hans Peter Freyther [Wed, 29 Dec 2010 20:14:20 +0000 (21:14 +0100)]
smscb: Add definition of a warning message
Holger Hans Peter Freyther [Wed, 29 Dec 2010 20:13:44 +0000 (21:13 +0100)]
smscb: Ignore the very simple test application.
Holger Hans Peter Freyther [Wed, 29 Dec 2010 11:00:01 +0000 (12:00 +0100)]
smscb: Mention 23.041 and fix the size of the update number
Holger Hans Peter Freyther [Wed, 29 Dec 2010 10:57:48 +0000 (11:57 +0100)]
smscb: Add some simple decoding routines for SMSCB.
Andreas.Eversberg [Tue, 28 Dec 2010 12:22:39 +0000 (12:22 +0000)]
[layer23] Enable half rate support in support.c
Andreas.Eversberg [Tue, 28 Dec 2010 12:21:18 +0000 (12:21 +0000)]
[layer23] Timer 3126 must be stopped even if starting time is given
Holger Hans Peter Freyther [Mon, 27 Dec 2010 19:03:27 +0000 (20:03 +0100)]
layer2: Make it possible to disable or increase the number of RA bursts
Holger Hans Peter Freyther [Mon, 27 Dec 2010 13:51:13 +0000 (14:51 +0100)]
layer23: Enable combining the long options
Combine the long options from the base and the application. Provide
the long option for the cell log application.
Holger Hans Peter Freyther [Mon, 27 Dec 2010 07:58:57 +0000 (08:58 +0100)]
layer23: Make the logfile configurable with cell_log
Be able to add extra (short) options from the 'applet' to
the main application. Use this to print the help mentioning
app specific options, pass the getopt string and handle the
command line parsing for it.
Change cell_log to keep the logname in the app_cell_log.c
and then access it from the cell_log.c implementation.
Holger Hans Peter Freyther [Sun, 26 Dec 2010 20:29:51 +0000 (21:29 +0100)]
layer23: Not every application supports every option add enum
Allow each application to specify the options it is supporting.
Holger Hans Peter Freyther [Sun, 26 Dec 2010 18:15:48 +0000 (19:15 +0100)]
layer23: Create an l23_app_info for various information and cb's
Make it possible that each l23 app can inject the copyright string,
also prepare to have callbacks for the config handling and other
places. This will be useful to add app specific config options.
Andreas.Eversberg [Mon, 27 Dec 2010 17:11:28 +0000 (17:11 +0000)]
[cell_log] Use GPS signal, even if it becomes valid during scanning
Sylvain Munaut [Mon, 27 Dec 2010 15:07:30 +0000 (16:07 +0100)]
fw/layer1: Resync TCH primitive on mode changes
This is needed for audio to work properly in VEA mode
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Harald Welte [Fri, 24 Dec 2010 14:10:14 +0000 (15:10 +0100)]
Use the app_info->name instead of the hostname
This makes more sense in case you run BCS, SGSN and other components
on the same host. Having multiple telnet sessions with the same
prompt can otherwise be confusing.
Holger Hans Peter Freyther [Mon, 20 Dec 2010 20:01:22 +0000 (21:01 +0100)]
stdint.h: Next attempt at making this work with various compilers
Newer GCC with GNU LIBC do not like our minimalistic version of
stdint.h and will have conflicts. Older GCC with older C Libs do
not have a stdint.h yet and the #include_next trick is failing. To
make matters worse NEWLIB does not export its version via the
pre-processor.
We will have to guess once more about the compiler. This code now
assumes that if we have a GCC < 4 that it does not have a stdint.h
and we will not try to include the next stdint.h file.
Holger Hans Peter Freyther [Mon, 20 Dec 2010 12:38:22 +0000 (13:38 +0100)]
rate_ctr: No need to include the inttypes.h
There should not be any u_int*_t types in this file, no need
to include this file. It is breaking compilation with the last
x86 build of GNU ARM for GCC 3.4.
Harald Welte [Sat, 18 Dec 2010 23:25:46 +0000 (00:25 +0100)]
update list of networks with information from ITU
http://www.itu.int/dms_pub/itu-t/opb/sp/T-SP-E.212B-2010-PDF-E.pdf
Harald Welte [Sat, 11 Dec 2010 19:04:31 +0000 (20:04 +0100)]
[mtk] Add initial / unfinished MT6139 driver
Harald Welte [Sat, 11 Dec 2010 04:23:58 +0000 (05:23 +0100)]
add perl scripts to compute MTK RF Transceiver PLL settings
Harald Welte [Sat, 11 Dec 2010 03:38:59 +0000 (11:38 +0800)]
README update about transmit as well as development
David Wilson [Thu, 9 Dec 2010 03:33:02 +0000 (03:33 +0000)]
layer23: use correct sizeof(sockaddr) for connecting to L1CTL socket
connect's addrlen should be sizeof(local), not the contained path's length.
With the previous code, on OS X connect() will fail with ENOENT.
This permits layer23 to work on OS X using the pl2303 driver,
/dev/tty.usbserial , MacPorts arm-elf-gcc and RANLIB=arm-elf-ranlib
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Sylvain Munaut [Sun, 28 Nov 2010 14:31:20 +0000 (15:31 +0100)]
Alex Badea [Sat, 27 Nov 2010 21:35:08 +0000 (23:35 +0200)]
protocol: introduce gsm_03_41.h
This currently contains definitions for the BTS->MS SMSCB message.
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Alex Badea [Sat, 27 Nov 2010 21:34:46 +0000 (23:34 +0200)]
gsm_08_58: add struct and constants for RSL_IE_CB_CMD_TYPE
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Alex Badea [Sat, 27 Nov 2010 18:00:39 +0000 (20:00 +0200)]
gsm_04_12: fix 04.13 typos
There are two occurrences of "413" in the 04.12 header file.
These are probably typos; correct them to "412".
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Alex Badea [Sun, 28 Nov 2010 13:45:17 +0000 (15:45 +0200)]
wireshark: fixes for the SMSCB dissector
Fix dissection of message ID, and cosmetic adjustments
to line up the bitfields.
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Sylvain Munaut [Sun, 28 Nov 2010 13:40:08 +0000 (14:40 +0100)]
fw/layer1: Fix reset of dedicated channel state
Thanks to Alex Badea <vamposdecampos@gmail.com> for pointing
this out.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Sylvain Munaut [Wed, 24 Nov 2010 09:05:49 +0000 (10:05 +0100)]
build: Use absolute path in the CFLAGS for libosmocore target build
There is now subdirectories to build !
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Alex Badea [Sat, 27 Nov 2010 16:31:49 +0000 (18:31 +0200)]
wireshark: update SMSCB dissector patch
Now factored out to its own dissector module, and supporting
message block reassembly.
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Sylvain Munaut [Wed, 24 Nov 2010 08:43:11 +0000 (09:43 +0100)]
fw/layer1: Fix missing include in prim_pm.c
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Alex Badea [Tue, 23 Nov 2010 19:03:03 +0000 (21:03 +0200)]
wireshark: add CBS/SMSCB dissector patch [WIP]
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Alex Badea [Sun, 21 Nov 2010 20:46:11 +0000 (22:46 +0200)]
host layer23: add a small cbch_sniff application
Tune to the ARFCN specified on the commandline (-a). Then, if
a CBCH Channel Description IE is found in System Information Type 4,
switch to dedicated mode on that particular channel to receive
the CBCH.
Alex Badea [Sun, 21 Nov 2010 20:45:23 +0000 (22:45 +0200)]
layer23 sysinfo: fix parsing of CBCH Mobile Allocation
When calling gsm48_decode_mobile_alloc(), read the length
byte from payload data[], rather than from si->data[].
Alex Badea [Sun, 21 Nov 2010 20:45:22 +0000 (22:45 +0200)]
layer23 sysinfo: store chan_nr when decoding CBCH Channel Description
Harald Welte [Sun, 21 Nov 2010 17:24:10 +0000 (18:24 +0100)]
Makefile: introduce 'make nofirmware' target to build host-only tools
Harald Welte [Sun, 21 Nov 2010 17:10:46 +0000 (18:10 +0100)]
rita_pll: Compute values for T-GSM 810
Andreas.Eversberg [Sat, 20 Nov 2010 08:58:44 +0000 (08:58 +0000)]
[layer23] VTY uses CAPITAL letters for all optional parameter names
This makes it easier to understand the VTY help. Every parameter name
is shown in capital letters, every keyword is shown in lower case.
Andreas.Eversberg [Sat, 20 Nov 2010 08:34:31 +0000 (08:34 +0000)]
[layer23] VTY supports "show this" to show current MS node only
Andreas.Eversberg [Sat, 20 Nov 2010 08:32:32 +0000 (08:32 +0000)]
[layer23] Adding LAC and TMSI (both optional) to test card (rplmn)
Andreas.Eversberg [Sat, 20 Nov 2010 08:30:45 +0000 (08:30 +0000)]
[layer23] Adding LAI to debug output of LOCATION UPDATING REQEST
Andreas.Eversberg [Sat, 20 Nov 2010 08:19:38 +0000 (08:19 +0000)]
[layer23] Bugfix: Exit, if init function fails
Holger Hans Peter Freyther [Fri, 19 Nov 2010 18:20:46 +0000 (19:20 +0100)]
utils: Fix typo. It is ascii.
Harald Welte [Thu, 18 Nov 2010 22:54:20 +0000 (23:54 +0100)]
gsmtap.h: Add GSMTAP_TYPE_SIM
Alex Badea [Wed, 17 Nov 2010 21:35:18 +0000 (23:35 +0200)]
toplevel Makefile: accept arguments for host ./configure calls
Append $(HOST_CONFARGS) to ./configure scripts for 'host' applications.
This allows e.g. cross-compiling on an x86 build system for an OpenMoko
gta0x host, using an invocation such as:
$ make HOST_CONFARGS="--host=arm-angstrom-linux-gnueabi"
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Alex Badea [Wed, 17 Nov 2010 21:35:17 +0000 (23:35 +0200)]
target uart: remove REG_OFFS() macro side-effect
Don't assign to the variable given as argument. This prevents
clobbering the local 'reg' variables in uart_reg_{read,write}(),
which would in turn prevent the latch bits from being restored
correctly.
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Alex Badea [Wed, 17 Nov 2010 21:35:16 +0000 (23:35 +0200)]
target uart: fix preservation of LCR
Store old_lcr only when switching to LCR == 0xBF. We don't want
to clobber old_lcr when switching back, otherwise we can't restore
the previous LCR value.
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Alex Badea [Wed, 17 Nov 2010 21:35:15 +0000 (23:35 +0200)]
osmocon: make beacon interval configurable via cmdline
Beacons with the default 50 mS interval are too far apart to
be picked up by the OpenMoko gta0x Calypso chip. Make them
configurable via a -i commandline argument.
As recommended in the OpenMoko wiki[1], an interval of 13 mS works.
[1] http://wiki.openmoko.org/wiki/GSM/Flashing (-od fluid argument)
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Sylvain Munaut [Sun, 14 Nov 2010 09:13:04 +0000 (10:13 +0100)]
fw/l1/mframe_sched: Fix the TCH_A entries to include the MF_F_SACCH flag
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Sylvain Munaut [Sun, 14 Nov 2010 15:08:08 +0000 (16:08 +0100)]
fw/layer1: Use dbm2rxlev instead of just '+110' so that overflows are handled
Without this, we would sometime get +143 dBm reported ... which is obviously
false.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Andreas.Eversberg [Sun, 14 Nov 2010 15:15:38 +0000 (15:15 +0000)]
[layer23/mobile] Better overview of "show ms" VTY command
Combined "sh ms" and "sh states" to a more detailed "sh ms". The
look-and-feel is more router like now.
Andreas.Eversberg [Sun, 14 Nov 2010 11:52:57 +0000 (11:52 +0000)]
[layer23] Cleanup of mobile application
All functions for handling mobile instances and mobile relevant parts are
moved to mobile/app_mobile.c, the mobile/main.c and mobile/mncc.c become a
simple out-of-the-box mobile application. (making calls)
The mobile/main.c can be replaced easily by a different application now.
this application may have it's own call control implementation (layer 4).
Full configurations via VTY is still possible and required in this case.
Andreas.Eversberg [Sun, 14 Nov 2010 11:50:14 +0000 (11:50 +0000)]
[layer23] Prevent layer23 apps from abort, if socket to layer1 fails
Sylvain Munaut [Sat, 13 Nov 2010 21:48:15 +0000 (22:48 +0100)]
Sylvain Munaut [Sat, 13 Nov 2010 21:47:47 +0000 (22:47 +0100)]
Move the generate backtrace call from MSGB_ABORT to osmo_panic handler
This has two benefits:
- All people calling osmo_panic() will have the backtrace
- It makes the thing build in 'target' mode in osmocom-bb
And one downside:
- The osmo_panic handler is now in the backtrace
(I can live with that :)
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Andreas.Eversberg [Sat, 13 Nov 2010 18:45:09 +0000 (18:45 +0000)]
[layer23] Added support for multiple MS instances
To create another instance: 'ms <name> create'
To remove an instance: 'no ms <name>'
If no instance exists, 'ms 1' is created automatically on startup.
Each instance can be enabled / disabled by using 'shutdown' or
'no shutdown'. Multiple instances may share the same layer2 socket (same
phone hardware), but in this case only one instance can be enabled at the
same time. This makes it much easier to select different settings without
modifying them.
A 'shutdown' initiates the IMSI detach procedure before shutdown is
completed. A 'shutdown force' will immidiately shutdown.
There is no need to restart the software anymore, if fundamental settings
are changed. In this case, a 'shutdown' followed by a 'no shutdown' will
do the job.
If you already have an old osmocom.cfg, you need to "no shutdown" it.
Everything else behaves as before.
Andreas.Eversberg [Sat, 13 Nov 2010 18:23:57 +0000 (18:23 +0000)]
[layer23] msgb_free() must in l1ctl.c must called after reading its header
Sylvain Munaut [Sat, 13 Nov 2010 17:00:25 +0000 (18:00 +0100)]
panic: Fix type warning - osmo_panic_handler_t is already a pointer ...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Sylvain Munaut [Sat, 13 Nov 2010 16:51:37 +0000 (17:51 +0100)]
gsm_utils: Define 4 upper bits as "flags" and mask them out in utility functions
This way those function don't care about the flags they don't know about
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Harald Welte [Tue, 9 Nov 2010 18:17:48 +0000 (19:17 +0100)]
add definitions for sciphone G2
Harald Welte [Tue, 9 Nov 2010 17:19:06 +0000 (18:19 +0100)]
add some header files about MTK GSM related peripherals
Harald Welte [Tue, 9 Nov 2010 12:42:26 +0000 (13:42 +0100)]
msgb: fix printing of msgb pointer during MSGB_ABORT()
Harald Welte [Tue, 9 Nov 2010 12:41:48 +0000 (13:41 +0100)]
msgb: don't compare unsigned int with int (fix lcr build)
Sylvain Munaut [Thu, 30 Sep 2010 21:12:06 +0000 (23:12 +0200)]
target_dsp/calypso: Makefile rework
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Sylvain Munaut [Wed, 29 Sep 2010 16:45:58 +0000 (18:45 +0200)]
target_dsp/calypso: Small updates bin2cfile.py script
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Sylvain Munaut [Wed, 29 Sep 2010 18:13:26 +0000 (20:13 +0200)]
target/fw/dsp: Implement section loading with bootloader
This works for both the default ROM bootloader and for our
custom one.
This will allow to implement easy patch loading.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Sylvain Munaut [Wed, 29 Sep 2010 16:43:56 +0000 (18:43 +0200)]
target/fw/dsp: Create a common function to start running code
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Sylvain Munaut [Fri, 22 Oct 2010 09:52:38 +0000 (11:52 +0200)]
layer23/mobile: Enable half_v1 support
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Sylvain Munaut [Sat, 6 Nov 2010 15:00:12 +0000 (16:00 +0100)]
target/fw/l1: Fix TCH/H1 by properly loading the TCH mode during TCH_A task
Altough quite counterintuitive, the TCH_A task does some voice coding
work ... at least during TCH/H subchannel 1 ...
Go figure ...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Sylvain Munaut [Sat, 30 Oct 2010 19:13:41 +0000 (21:13 +0200)]
target/fw/l1: Fix TCH/H by properly scheduling the TCHD task during 'off' slots
Apparently the DSP needs to be run even during the slots without
actual bursts exchange.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Andreas.Eversberg [Sun, 7 Nov 2010 10:48:12 +0000 (10:48 +0000)]
[layer23] Call application sends CC Capability on incoming call
It is required to make DTMF work on incoming calls also.
Steve Markgraf [Sat, 6 Nov 2010 13:52:12 +0000 (14:52 +0100)]
layer23/misc: Update .gitignore for ./cell_log
Signed-off-by: Steve Markgraf <steve@steve-m.de>
Steve Markgraf [Sat, 6 Nov 2010 13:45:39 +0000 (14:45 +0100)]
layer23/mobile: Fix 'implicit declaration' warning for mncc_answer()
Signed-off-by: Steve Markgraf <steve@steve-m.de>
Harald Welte [Fri, 5 Nov 2010 06:50:40 +0000 (07:50 +0100)]
msgb_abort(): better formatting
Harald Welte [Fri, 5 Nov 2010 06:49:39 +0000 (07:49 +0100)]
generate backtrace in msgb_abort()
This helps us to debug where we encounter insufficient headroom...
Harald Welte [Fri, 5 Nov 2010 06:47:41 +0000 (07:47 +0100)]
Change msgb_abort() function in MSGB_ABORT argument with variable arguments
This enables callers to provide format string and arguments to it
Also, put conditionals into the macro, and remove them from the caller
site.
Holger Hans Peter Freyther [Thu, 4 Nov 2010 11:42:50 +0000 (12:42 +0100)]
gsm0808: Move the clear request from bsc_msc_ip to here
This method should use the msgb_tlv_put routines instead
of the stuff it is doing. This will be cleaned up.
Holger Hans Peter Freyther [Thu, 4 Nov 2010 11:26:06 +0000 (12:26 +0100)]
gsm0808: Add a method to create a new DTAP message with a msgb
Harald Welte [Sun, 31 Oct 2010 12:56:45 +0000 (13:56 +0100)]
select.c: Change license terms from GPLv2 (from ulogd) to GPLv2+
Andreas.Eversberg [Sat, 30 Oct 2010 15:30:59 +0000 (17:30 +0200)]
layer23: Use the new rach_req format in l1ctl and update l23 apps to use it
This removes an old hack
Written-by: Andreas Eversberg <jolly@eversberg.eu>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Andreas.Eversberg [Sat, 30 Oct 2010 15:27:03 +0000 (17:27 +0200)]
target/fw/layer1: Change L1CTL RACH req to properly use all slots
Written-by: Andreas Eversberg <jolly@eversberg.eu>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Andreas.Eversberg [Sat, 30 Oct 2010 12:30:00 +0000 (12:30 +0000)]
[layer23] cell_log's scanning depth now depends on movement speed
Andreas.Eversberg [Sat, 30 Oct 2010 08:53:22 +0000 (08:53 +0000)]
[layer23] Fixed T3 value in RACH confirm message
Steve Markgraf [Wed, 27 Oct 2010 18:30:13 +0000 (20:30 +0200)]
layer23/mobile: Add configuration option for automatically answering calls
Signed-off-by: Steve Markgraf <steve@steve-m.de>
Steve Markgraf [Wed, 27 Oct 2010 18:26:05 +0000 (20:26 +0200)]
layer23: typo/cosmetic fixes in cell_log.c and mnccms.c
Signed-off-by: Steve Markgraf <steve@steve-m.de>
Holger Hans Peter Freyther [Wed, 27 Oct 2010 10:36:05 +0000 (12:36 +0200)]
gsm0808: Fix the format of the clear IE...
This is really TLV...
Holger Hans Peter Freyther [Wed, 27 Oct 2010 09:49:24 +0000 (11:49 +0200)]
gsm0808: Add a method to create a clear command message.
Use the msgb_tv_put functions for putting the data into
the message. Do not support the extended error reports.
Holger Hans Peter Freyther [Tue, 26 Oct 2010 07:31:16 +0000 (09:31 +0200)]
msgfile: Allow to have comments in the simple CSV file
Steve Markgraf [Mon, 25 Oct 2010 16:05:04 +0000 (18:05 +0200)]
target/fw/layer1: correctly initialize afc_retries
Otherwise, when it reached AFC_RETRY_COUNT, no new FB0 tasks
were scheduled, and you needed to restart the phone in order to
successfully sync to a cell
Signed-off-by: Steve Markgraf <steve@steve-m.de>
Sylvain Munaut [Mon, 18 Oct 2010 20:38:08 +0000 (22:38 +0200)]
target/fw/l23_api: Enable/Disable audio path appropriately
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Sylvain Munaut [Mon, 18 Oct 2010 20:37:32 +0000 (22:37 +0200)]
target/fw/l23_api: Properly sync tch in DM EST REQ
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>