+++ /dev/null
-#! /bin/sh
-# Copyright (c) 2001-2002 SuSE GmbH Nuernberg, Germany.
-#
-# Author: Michal Ludvig <feedback@suse.de>, 2004
-#
-# /etc/init.d/ipsec-tools
-# and its symbolic link
-# /usr/sbin/rcipsec-tools
-#
-# System startup script for the IPsec key management daemon
-#
-### BEGIN INIT INFO
-# Provides: racoon
-# Required-Start: $remote_fs $named $syslog
-# Required-Stop: $remote_fs $named $syslog
-# Default-Start: 3 5
-# Default-Stop: 0 1 2 6
-# Description: IPsec key management daemon
-### END INIT INFO
-
-SETKEY="IPsec policies"
-SETKEY_BIN=/usr/sbin/setkey
-SETKEY_CONF=/etc/racoon/setkey.conf
-
-RACOON="IPsec IKE daemon (racoon)"
-RACOON_BIN=/usr/sbin/racoon
-RACOON_CONF=/etc/racoon/racoon.conf
-RACOON_PIDFILE=/var/run/racoon.pid
-
-test -x $SETKEY_BIN || exit 5
-test -x $RACOON_BIN || exit 5
-
-test -f /etc/sysconfig/racoon && . /etc/sysconfig/racoon
-
-# Shell functions sourced from /etc/rc.status:
-# rc_check check and set local and overall rc status
-# rc_status check and set local and overall rc status
-# rc_status -v ditto but be verbose in local rc status
-# rc_status -v -r ditto and clear the local rc status
-# rc_failed set local and overall rc status to failed
-# rc_failed <num> set local and overall rc status to <num><num>
-# rc_reset clear local rc status (overall remains)
-# rc_exit exit appropriate to overall rc status
-. /etc/rc.status
-
-# First reset status of this service
-rc_reset
-
-# Return values acc. to LSB for all commands but status:
-# 0 - success
-# 1 - generic or unspecified error
-# 2 - invalid or excess argument(s)
-# 3 - unimplemented feature (e.g. "reload")
-# 4 - insufficient privilege
-# 5 - program is not installed
-# 6 - program is not configured
-# 7 - program is not running
-#
-# Note that starting an already running service, stopping
-# or restarting a not-running service as well as the restart
-# with force-reload (in case signalling is not supported) are
-# considered a success.
-
-case "$1" in
- start)
- # Setting up SPD policies is not required.
- if [ -f $SETKEY_CONF ]; then
- echo -n "Setting up $SETKEY"
- $SETKEY_BIN $SETKEY_OPTIONS -f $SETKEY_CONF
- rc_status -v
- rc_reset
- fi
-
- echo -n "Starting $RACOON "
- ## If there is no conf file, skip starting of ddtd
- ## and return with "program not configured"
- if ! [ -f $RACOON_CONF ]; then
- echo -e -n "... no configuration file found"
- rc_status -s
- # service is not configured
- rc_failed 6
- rc_exit
- fi
-
- # startproc should return 0, even if service is
- # already running to match LSB spec.
- startproc $RACOON_BIN $RACOON_OPTIONS -f $RACOON_CONF
- rc_status -v
- ;;
-
- stop)
- echo -n "Shutting down $RACOON"
- ## Stop daemon with killproc(8) and if this fails
- ## set echo the echo return value.
-
- killproc -p $RACOON_PIDFILE -TERM $RACOON_BIN
-
- # Remember status and be verbose
- rc_status -v
- rc_reset
-
- # Flush SPD policies if required
- if [ -n "$SETKEY_FLUSH_OPTIONS" ]; then
- echo -n "Flushing $SETKEY"
- $SETKEY_BIN $SETKEY_FLUSH_OPTIONS
- rc_status -v
- fi
- ;;
- try-restart)
- ## Stop the service and if this succeeds (i.e. the
- ## service was running before), start it again.
- $0 stop && $0 start
-
- # Remember status and be quiet
- rc_status
- ;;
- restart)
- ## Stop the service and regardless of whether it was
- ## running or not, start it again.
- $0 stop
- $0 start
-
- # Remember status and be quiet
- rc_status
- ;;
- force-reload)
- ## Signal the daemon to reload its config. Most daemons
- ## do this on signal 1 (SIGHUP).
- ## If it does not support it, restart.
-
- echo -n "Reload service $RACOON"
- killproc -p $RACOON_PIDFILE -HUP $RACOON_BIN
- rc_status -v
- ;;
- reload)
- ## Like force-reload, but if daemon does not support
- ## signalling, do nothing (!)
-
- echo -n "Reload service $RACOON"
- killproc -p $RACOON_PIDFILE -HUP $RACOON_BIN
- rc_status -v
- ;;
- status)
- echo -n "Checking for $RACOON: "
- ## Check status with checkproc(8), if process is running
- ## checkproc will return with exit status 0.
-
- # Status has a slightly different for the status command:
- # 0 - service running
- # 1 - service dead, but /var/run/ pid file exists
- # 2 - service dead, but /var/lock/ lock file exists
- # 3 - service not running
-
- checkproc -p $RACOON_PIDFILE $RACOON_BIN
- rc_status -v
- ;;
- probe)
- ## Optional: Probe for the necessity of a reload,
- ## give out the argument which is required for a reload.
-
- test "$RACOON_CONF" -nt "$RACOON_PIDFILE" && echo reload
- ;;
- *)
- echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
- exit 1
- ;;
-esac
-rc_exit
projects / bcm963xx.git / blobdiff