--- /dev/null
+EtherLike-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
+ Counter32, mib-2, transmission
+ FROM SNMPv2-SMI
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF
+ ifIndex, InterfaceIndex
+ FROM IF-MIB;
+
+ etherMIB MODULE-IDENTITY
+ LAST-UPDATED "9908240400Z" -- August 24, 1999
+ ORGANIZATION "IETF Ethernet Interfaces and Hub MIB
+ Working Group"
+ CONTACT-INFO
+ "WG E-mail: hubmib@hprnd.rose.hp.com
+ To subscribe: hubmib-request@hprnd.rose.hp.com
+
+ Chair: Dan Romascanu
+ Postal: Lucent Technologies
+ Atidum Technology Park, Bldg. 3
+ Tel Aviv 61131
+ Israel
+ Tel: +972 3 645 8414
+ E-mail: dromasca@lucent.com
+
+ Editor: John Flick
+ Postal: Hewlett-Packard Company
+ 8000 Foothills Blvd. M/S 5557
+ Roseville, CA 95747-5557
+ USA
+ Tel: +1 916 785 4018
+ Fax: +1 916 785 1199
+ E-mail: johnf@rose.hp.com
+
+ Editor: Jeffrey Johnson
+ Postal: RedBack Networks
+ 2570 North First Street, Suite 410
+ San Jose, CA, 95131
+ USA
+ Tel: +1 408 571 2699
+ Fax: +1 408 571 2698
+ E-Mail: jeff@redbacknetworks.com"
+ DESCRIPTION "The MIB module to describe generic objects for
+
+ Ethernet-like network interfaces.
+
+ The following reference is used throughout this
+ MIB module:
+
+ [IEEE 802.3 Std] refers to:
+ IEEE Std 802.3, 1998 Edition: 'Information
+ technology - Telecommunications and
+ information exchange between systems -
+ Local and metropolitan area networks -
+ Specific requirements - Part 3: Carrier
+ sense multiple access with collision
+ detection (CSMA/CD) access method and
+ physical layer specifications',
+ September 1998.
+
+ Of particular interest is Clause 30, '10Mb/s,
+ 100Mb/s and 1000Mb/s Management'."
+
+ REVISION "9908240400Z" -- August 24, 1999
+ DESCRIPTION "Updated to include support for 1000 Mb/sec
+ interfaces and full-duplex interfaces.
+ This version published as RFC 2665."
+
+ REVISION "9806032150Z"
+ DESCRIPTION "Updated to include support for 100 Mb/sec
+ interfaces.
+ This version published as RFC 2358."
+
+ REVISION "9402030400Z"
+ DESCRIPTION "Initial version, published as RFC 1650."
+ ::= { mib-2 35 }
+
+ etherMIBObjects OBJECT IDENTIFIER ::= { etherMIB 1 }
+
+ dot3 OBJECT IDENTIFIER ::= { transmission 7 }
+
+ -- the Ethernet-like Statistics group
+
+ dot3StatsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot3StatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Statistics for a collection of ethernet-like
+ interfaces attached to a particular system.
+ There will be one row in this table for each
+
+ ethernet-like interface in the system."
+ ::= { dot3 2 }
+
+ dot3StatsEntry OBJECT-TYPE
+ SYNTAX Dot3StatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Statistics for a particular interface to an
+ ethernet-like medium."
+ INDEX { dot3StatsIndex }
+ ::= { dot3StatsTable 1 }
+
+ Dot3StatsEntry ::=
+ SEQUENCE {
+ dot3StatsIndex InterfaceIndex,
+ dot3StatsAlignmentErrors Counter32,
+ dot3StatsFCSErrors Counter32,
+ dot3StatsSingleCollisionFrames Counter32,
+ dot3StatsMultipleCollisionFrames Counter32,
+ dot3StatsSQETestErrors Counter32,
+ dot3StatsDeferredTransmissions Counter32,
+ dot3StatsLateCollisions Counter32,
+ dot3StatsExcessiveCollisions Counter32,
+ dot3StatsInternalMacTransmitErrors Counter32,
+ dot3StatsCarrierSenseErrors Counter32,
+ dot3StatsFrameTooLongs Counter32,
+ dot3StatsInternalMacReceiveErrors Counter32,
+ dot3StatsEtherChipSet OBJECT IDENTIFIER,
+ dot3StatsSymbolErrors Counter32,
+ dot3StatsDuplexStatus INTEGER
+ }
+
+ dot3StatsIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "An index value that uniquely identifies an
+ interface to an ethernet-like medium. The
+ interface identified by a particular value of
+ this index is the same interface as identified
+ by the same value of ifIndex."
+ REFERENCE "RFC 2233, ifIndex"
+ ::= { dot3StatsEntry 1 }
+
+ dot3StatsAlignmentErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A count of frames received on a particular
+ interface that are not an integral number of
+ octets in length and do not pass the FCS check.
+
+ The count represented by an instance of this
+ object is incremented when the alignmentError
+ status is returned by the MAC service to the
+ LLC (or other MAC user). Received frames for
+ which multiple error conditions obtain are,
+ according to the conventions of IEEE 802.3
+ Layer Management, counted exclusively according
+ to the error status presented to the LLC.
+
+ This counter does not increment for 8-bit wide
+ group encoding schemes.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.7,
+ aAlignmentErrors"
+ ::= { dot3StatsEntry 2 }
+
+ dot3StatsFCSErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A count of frames received on a particular
+ interface that are an integral number of octets
+ in length but do not pass the FCS check. This
+ count does not include frames received with
+ frame-too-long or frame-too-short error.
+
+ The count represented by an instance of this
+ object is incremented when the frameCheckError
+ status is returned by the MAC service to the
+ LLC (or other MAC user). Received frames for
+ which multiple error conditions obtain are,
+ according to the conventions of IEEE 802.3
+ Layer Management, counted exclusively according
+ to the error status presented to the LLC.
+
+ Note: Coding errors detected by the physical
+ layer for speeds above 10 Mb/s will cause the
+ frame to fail the FCS check.
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.6,
+ aFrameCheckSequenceErrors."
+ ::= { dot3StatsEntry 3 }
+
+ dot3StatsSingleCollisionFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A count of successfully transmitted frames on
+ a particular interface for which transmission
+ is inhibited by exactly one collision.
+
+ A frame that is counted by an instance of this
+ object is also counted by the corresponding
+ instance of either the ifOutUcastPkts,
+ ifOutMulticastPkts, or ifOutBroadcastPkts,
+ and is not counted by the corresponding
+ instance of the dot3StatsMultipleCollisionFrames
+ object.
+
+ This counter does not increment when the
+ interface is operating in full-duplex mode.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.3,
+ aSingleCollisionFrames."
+ ::= { dot3StatsEntry 4 }
+
+ dot3StatsMultipleCollisionFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A count of successfully transmitted frames on
+ a particular interface for which transmission
+ is inhibited by more than one collision.
+
+ A frame that is counted by an instance of this
+ object is also counted by the corresponding
+ instance of either the ifOutUcastPkts,
+ ifOutMulticastPkts, or ifOutBroadcastPkts,
+ and is not counted by the corresponding
+ instance of the dot3StatsSingleCollisionFrames
+ object.
+
+ This counter does not increment when the
+ interface is operating in full-duplex mode.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.4,
+ aMultipleCollisionFrames."
+ ::= { dot3StatsEntry 5 }
+
+ dot3StatsSQETestErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A count of times that the SQE TEST ERROR
+ message is generated by the PLS sublayer for a
+ particular interface. The SQE TEST ERROR
+ is set in accordance with the rules for
+ verification of the SQE detection mechanism in
+ the PLS Carrier Sense Function as described in
+ IEEE Std. 802.3, 1998 Edition, section 7.2.4.6.
+
+ This counter does not increment on interfaces
+ operating at speeds greater than 10 Mb/s, or on
+ interfaces operating in full-duplex mode.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ REFERENCE "[IEEE 802.3 Std.], 7.2.4.6, also 30.3.2.1.4,
+ aSQETestErrors."
+ ::= { dot3StatsEntry 6 }
+
+ dot3StatsDeferredTransmissions OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A count of frames for which the first
+ transmission attempt on a particular interface
+ is delayed because the medium is busy.
+ The count represented by an instance of this
+ object does not include frames involved in
+ collisions.
+
+ This counter does not increment when the
+ interface is operating in full-duplex mode.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.9,
+ aFramesWithDeferredXmissions."
+ ::= { dot3StatsEntry 7 }
+
+ dot3StatsLateCollisions OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The number of times that a collision is
+ detected on a particular interface later than
+ one slotTime into the transmission of a packet.
+
+ A (late) collision included in a count
+ represented by an instance of this object is
+ also considered as a (generic) collision for
+ purposes of other collision-related
+ statistics.
+
+ This counter does not increment when the
+ interface is operating in full-duplex mode.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.10,
+ aLateCollisions."
+ ::= { dot3StatsEntry 8 }
+
+ dot3StatsExcessiveCollisions OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A count of frames for which transmission on a
+ particular interface fails due to excessive
+ collisions.
+ This counter does not increment when the
+ interface is operating in full-duplex mode.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.11,
+ aFramesAbortedDueToXSColls."
+ ::= { dot3StatsEntry 9 }
+
+ dot3StatsInternalMacTransmitErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A count of frames for which transmission on a
+ particular interface fails due to an internal
+ MAC sublayer transmit error. A frame is only
+ counted by an instance of this object if it is
+ not counted by the corresponding instance of
+ either the dot3StatsLateCollisions object, the
+ dot3StatsExcessiveCollisions object, or the
+ dot3StatsCarrierSenseErrors object.
+
+ The precise meaning of the count represented by
+ an instance of this object is implementation-
+ specific. In particular, an instance of this
+ object may represent a count of transmission
+ errors on a particular interface that are not
+ otherwise counted.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.12,
+ aFramesLostDueToIntMACXmitError."
+ ::= { dot3StatsEntry 10 }
+
+ dot3StatsCarrierSenseErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The number of times that the carrier sense
+ condition was lost or never asserted when
+ attempting to transmit a frame on a particular
+ interface.
+
+ The count represented by an instance of this
+ object is incremented at most once per
+ transmission attempt, even if the carrier sense
+ condition fluctuates during a transmission
+ attempt.
+
+ This counter does not increment when the
+ interface is operating in full-duplex mode.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.13,
+ aCarrierSenseErrors."
+ ::= { dot3StatsEntry 11 }
+
+ -- { dot3StatsEntry 12 } is not assigned
+
+ dot3StatsFrameTooLongs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A count of frames received on a particular
+ interface that exceed the maximum permitted
+ frame size.
+
+ The count represented by an instance of this
+ object is incremented when the frameTooLong
+ status is returned by the MAC service to the
+ LLC (or other MAC user). Received frames for
+ which multiple error conditions obtain are,
+ according to the conventions of IEEE 802.3
+ Layer Management, counted exclusively according
+ to the error status presented to the LLC.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.25,
+ aFrameTooLongErrors."
+ ::= { dot3StatsEntry 13 }
+
+ -- { dot3StatsEntry 14 } is not assigned
+
+ -- { dot3StatsEntry 15 } is not assigned
+
+ dot3StatsInternalMacReceiveErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A count of frames for which reception on a
+ particular interface fails due to an internal
+ MAC sublayer receive error. A frame is only
+ counted by an instance of this object if it is
+ not counted by the corresponding instance of
+
+ either the dot3StatsFrameTooLongs object, the
+ dot3StatsAlignmentErrors object, or the
+ dot3StatsFCSErrors object.
+
+ The precise meaning of the count represented by
+ an instance of this object is implementation-
+ specific. In particular, an instance of this
+ object may represent a count of receive errors
+ on a particular interface that are not
+ otherwise counted.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.15,
+ aFramesLostDueToIntMACRcvError."
+ ::= { dot3StatsEntry 16 }
+
+ dot3StatsEtherChipSet OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION "******** THIS OBJECT IS DEPRECATED ********
+
+ This object contains an OBJECT IDENTIFIER
+ which identifies the chipset used to
+ realize the interface. Ethernet-like
+ interfaces are typically built out of
+ several different chips. The MIB implementor
+ is presented with a decision of which chip
+ to identify via this object. The implementor
+ should identify the chip which is usually
+ called the Medium Access Control chip.
+ If no such chip is easily identifiable,
+ the implementor should identify the chip
+ which actually gathers the transmit
+ and receive statistics and error
+ indications. This would allow a
+ manager station to correlate the
+ statistics and the chip generating
+ them, giving it the ability to take
+ into account any known anomalies
+ in the chip."
+ ::= { dot3StatsEntry 17 }
+
+ dot3StatsSymbolErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "For an interface operating at 100 Mb/s, the
+ number of times there was an invalid data symbol
+ when a valid carrier was present.
+
+ For an interface operating in half-duplex mode
+ at 1000 Mb/s, the number of times the receiving
+ media is non-idle (a carrier event) for a period
+ of time equal to or greater than slotTime, and
+ during which there was at least one occurrence
+ of an event that causes the PHY to indicate
+ 'Data reception error' or 'carrier extend error'
+ on the GMII.
+
+ For an interface operating in full-duplex mode
+ at 1000 Mb/s, the number of times the receiving
+ media is non-idle a carrier event) for a period
+ of time equal to or greater than minFrameSize,
+ and during which there was at least one
+ occurrence of an event that causes the PHY to
+ indicate 'Data reception error' on the GMII.
+
+ The count represented by an instance of this
+ object is incremented at most once per carrier
+ event, even if multiple symbol errors occur
+ during the carrier event. This count does
+ not increment if a collision is present.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.2.1.5,
+ aSymbolErrorDuringCarrier."
+ ::= { dot3StatsEntry 18 }
+
+ dot3StatsDuplexStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ halfDuplex(2),
+ fullDuplex(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The current mode of operation of the MAC
+ entity. 'unknown' indicates that the current
+ duplex mode could not be determined.
+
+ Management control of the duplex mode is
+ accomplished through the MAU MIB. When
+ an interface does not support autonegotiation,
+ or when autonegotiation is not enabled, the
+ duplex mode is controlled using
+ ifMauDefaultType. When autonegotiation is
+ supported and enabled, duplex mode is controlled
+ using ifMauAutoNegAdvertisedBits. In either
+ case, the currently operating duplex mode is
+ reflected both in this object and in ifMauType.
+
+ Note that this object provides redundant
+ information with ifMauType. Normally, redundant
+ objects are discouraged. However, in this
+ instance, it allows a management application to
+ determine the duplex status of an interface
+ without having to know every possible value of
+ ifMauType. This was felt to be sufficiently
+ valuable to justify the redundancy."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.32,
+ aDuplexStatus."
+ ::= { dot3StatsEntry 19 }
+
+ -- the Ethernet-like Collision Statistics group
+
+ -- Implementation of this group is optional; it is appropriate
+ -- for all systems which have the necessary metering
+
+ dot3CollTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot3CollEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "A collection of collision histograms for a
+ particular set of interfaces."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.30,
+ aCollisionFrames."
+ ::= { dot3 5 }
+
+ dot3CollEntry OBJECT-TYPE
+ SYNTAX Dot3CollEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "A cell in the histogram of per-frame
+ collisions for a particular interface. An
+ instance of this object represents the
+ frequency of individual MAC frames for which
+ the transmission (successful or otherwise) on a
+ particular interface is accompanied by a
+
+ particular number of media collisions."
+ INDEX { ifIndex, dot3CollCount }
+ ::= { dot3CollTable 1 }
+
+ Dot3CollEntry ::=
+ SEQUENCE {
+ dot3CollCount INTEGER,
+ dot3CollFrequencies Counter32
+ }
+
+ -- { dot3CollEntry 1 } is no longer in use
+
+ dot3CollCount OBJECT-TYPE
+ SYNTAX INTEGER (1..16)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "The number of per-frame media collisions for
+ which a particular collision histogram cell
+ represents the frequency on a particular
+ interface."
+ ::= { dot3CollEntry 2 }
+
+ dot3CollFrequencies OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A count of individual MAC frames for which the
+ transmission (successful or otherwise) on a
+ particular interface occurs after the
+ frame has experienced exactly the number
+ of collisions in the associated
+ dot3CollCount object.
+
+ For example, a frame which is transmitted
+ on interface 77 after experiencing
+ exactly 4 collisions would be indicated
+ by incrementing only dot3CollFrequencies.77.4.
+ No other instance of dot3CollFrequencies would
+ be incremented in this example.
+
+ This counter does not increment when the
+ interface is operating in full-duplex mode.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ ::= { dot3CollEntry 3 }
+
+ dot3ControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot3ControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "A table of descriptive and status information
+ about the MAC Control sublayer on the
+ ethernet-like interfaces attached to a
+ particular system. There will be one row in
+ this table for each ethernet-like interface in
+ the system which implements the MAC Control
+ sublayer. If some, but not all, of the
+ ethernet-like interfaces in the system implement
+ the MAC Control sublayer, there will be fewer
+ rows in this table than in the dot3StatsTable."
+ ::= { dot3 9 }
+
+ dot3ControlEntry OBJECT-TYPE
+ SYNTAX Dot3ControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "An entry in the table, containing information
+ about the MAC Control sublayer on a single
+ ethernet-like interface."
+ INDEX { dot3StatsIndex }
+ ::= { dot3ControlTable 1 }
+
+ Dot3ControlEntry ::=
+ SEQUENCE {
+ dot3ControlFunctionsSupported BITS,
+ dot3ControlInUnknownOpcodes Counter32
+ }
+
+ dot3ControlFunctionsSupported OBJECT-TYPE
+ SYNTAX BITS {
+ pause(0) -- 802.3x flow control
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A list of the possible MAC Control functions
+ implemented for this interface."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.3.2,
+ aMACControlFunctionsSupported."
+ ::= { dot3ControlEntry 1 }
+
+ dot3ControlInUnknownOpcodes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A count of MAC Control frames received on this
+ interface that contain an opcode that is not
+ supported by this device.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.3.5,
+ aUnsupportedOpcodesReceived"
+ ::= { dot3ControlEntry 2 }
+
+ dot3PauseTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot3PauseEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "A table of descriptive and status information
+ about the MAC Control PAUSE function on the
+ ethernet-like interfaces attached to a
+ particular system. There will be one row in
+ this table for each ethernet-like interface in
+ the system which supports the MAC Control PAUSE
+ function (i.e., the 'pause' bit in the
+ corresponding instance of
+ dot3ControlFunctionsSupported is set). If some,
+ but not all, of the ethernet-like interfaces in
+ the system implement the MAC Control PAUSE
+ function (for example, if some interfaces only
+ support half-duplex), there will be fewer rows
+ in this table than in the dot3StatsTable."
+ ::= { dot3 10 }
+
+ dot3PauseEntry OBJECT-TYPE
+ SYNTAX Dot3PauseEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "An entry in the table, containing information
+ about the MAC Control PAUSE function on a single
+ ethernet-like interface."
+ INDEX { dot3StatsIndex }
+ ::= { dot3PauseTable 1 }
+
+ Dot3PauseEntry ::=
+ SEQUENCE {
+ dot3PauseAdminMode INTEGER,
+ dot3PauseOperMode INTEGER,
+ dot3InPauseFrames Counter32,
+ dot3OutPauseFrames Counter32
+
+ }
+
+ dot3PauseAdminMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(1),
+ enabledXmit(2),
+ enabledRcv(3),
+ enabledXmitAndRcv(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object is used to configure the default
+ administrative PAUSE mode for this interface.
+
+ This object represents the
+ administratively-configured PAUSE mode for this
+ interface. If auto-negotiation is not enabled
+ or is not implemented for the active MAU
+ attached to this interface, the value of this
+ object determines the operational PAUSE mode
+ of the interface whenever it is operating in
+ full-duplex mode. In this case, a set to this
+ object will force the interface into the
+ specified mode.
+
+ If auto-negotiation is implemented and enabled
+ for the MAU attached to this interface, the
+ PAUSE mode for this interface is determined by
+ auto-negotiation, and the value of this object
+ denotes the mode to which the interface will
+ automatically revert if/when auto-negotiation is
+ later disabled. Note that when auto-negotiation
+ is running, administrative control of the PAUSE
+ mode may be accomplished using the
+ ifMauAutoNegCapAdvertisedBits object in the
+ MAU-MIB.
+
+ Note that the value of this object is ignored
+ when the interface is not operating in
+ full-duplex mode.
+
+ An attempt to set this object to
+ 'enabledXmit(2)' or 'enabledRcv(3)' will fail
+ on interfaces that do not support operation
+ at greater than 100 Mb/s."
+ ::= { dot3PauseEntry 1 }
+
+ dot3PauseOperMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(1),
+ enabledXmit(2),
+ enabledRcv(3),
+ enabledXmitAndRcv(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object reflects the PAUSE mode currently
+ in use on this interface, as determined by
+ either (1) the result of the auto-negotiation
+ function or (2) if auto-negotiation is not
+ enabled or is not implemented for the active MAU
+ attached to this interface, by the value of
+ dot3PauseAdminMode. Interfaces operating at
+ 100 Mb/s or less will never return
+ 'enabledXmit(2)' or 'enabledRcv(3)'. Interfaces
+ operating in half-duplex mode will always return
+ 'disabled(1)'. Interfaces on which
+ auto-negotiation is enabled but not yet
+ completed should return the value
+ 'disabled(1)'."
+ ::= { dot3PauseEntry 2 }
+
+ dot3InPauseFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A count of MAC Control frames received on this
+ interface with an opcode indicating the PAUSE
+ operation.
+
+ This counter does not increment when the
+ interface is operating in half-duplex mode.
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.4.3,
+ aPAUSEMACCtrlFramesReceived."
+ ::= { dot3PauseEntry 3 }
+
+ dot3OutPauseFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A count of MAC Control frames transmitted on
+ this interface with an opcode indicating the
+
+ PAUSE operation.
+
+ This counter does not increment when the
+ interface is operating in half-duplex mode.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management
+ system, and at other times as indicated by the
+ value of ifCounterDiscontinuityTime."
+ REFERENCE "[IEEE 802.3 Std.], 30.3.4.2,
+ aPAUSEMACCtrlFramesTransmitted."
+ ::= { dot3PauseEntry 4 }
+
+ -- 802.3 Tests
+
+ dot3Tests OBJECT IDENTIFIER ::= { dot3 6 }
+
+ dot3Errors OBJECT IDENTIFIER ::= { dot3 7 }
+
+ -- TDR Test
+
+ dot3TestTdr OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION "The Time-Domain Reflectometry (TDR) test is
+ specific to ethernet-like interfaces of type
+ 10Base5 and 10Base2. The TDR value may be
+ useful in determining the approximate distance
+ to a cable fault. It is advisable to repeat
+ this test to check for a consistent resulting
+ TDR value, to verify that there is a fault.
+
+ A TDR test returns as its result the time
+ interval, measured in 10 MHz ticks or 100 nsec
+ units, between the start of TDR test
+ transmission and the subsequent detection of a
+ collision or deassertion of carrier. On
+ successful completion of a TDR test, the result
+ is stored as the value of an appropriate
+ instance of an appropriate vendor specific MIB
+ object, and the OBJECT IDENTIFIER of that
+ instance is stored in the appropriate instance
+ of the appropriate test result code object
+ (thereby indicating where the result has been
+ stored)."
+ ::= { dot3Tests 1 }
+
+ -- Loopback Test
+
+ dot3TestLoopBack OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION "This test configures the MAC chip and executes
+ an internal loopback test of memory, data paths,
+ and the MAC chip logic. This loopback test can
+ only be executed if the interface is offline.
+ Once the test has completed, the MAC chip should
+ be reinitialized for network operation, but it
+ should remain offline.
+
+ If an error occurs during a test, the
+ appropriate test result object will be set
+ to indicate a failure. The two OBJECT
+ IDENTIFIER values dot3ErrorInitError and
+ dot3ErrorLoopbackError may be used to provided
+ more information as values for an appropriate
+ test result code object."
+ ::= { dot3Tests 2 }
+
+ dot3ErrorInitError OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION "Couldn't initialize MAC chip for test."
+ ::= { dot3Errors 1 }
+
+ dot3ErrorLoopbackError OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION "Expected data not received (or not received
+ correctly) in loopback test."
+ ::= { dot3Errors 2 }
+
+ -- { dot3 8 }, the dot3ChipSets tree, is defined in [28]
+
+ -- conformance information
+
+ etherConformance OBJECT IDENTIFIER ::= { etherMIB 2 }
+
+ etherGroups OBJECT IDENTIFIER ::= { etherConformance 1 }
+ etherCompliances OBJECT IDENTIFIER ::= { etherConformance 2 }
+
+ -- compliance statements
+
+ etherCompliance MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION "******** THIS COMPLIANCE IS DEPRECATED ********
+
+ The compliance statement for managed network
+ entities which have ethernet-like network
+ interfaces.
+
+ This compliance is deprecated and replaced by
+ dot3Compliance."
+
+ MODULE -- this module
+ MANDATORY-GROUPS { etherStatsGroup }
+
+ GROUP etherCollisionTableGroup
+ DESCRIPTION "This group is optional. It is appropriate
+ for all systems which have the necessary
+ metering. Implementation in such systems is
+ highly recommended."
+ ::= { etherCompliances 1 }
+
+ ether100MbsCompliance MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION "******** THIS COMPLIANCE IS DEPRECATED ********
+
+ The compliance statement for managed network
+ entities which have 100 Mb/sec ethernet-like
+ network interfaces.
+
+ This compliance is deprecated and replaced by
+ dot3Compliance."
+
+ MODULE -- this module
+ MANDATORY-GROUPS { etherStats100MbsGroup }
+
+ GROUP etherCollisionTableGroup
+ DESCRIPTION "This group is optional. It is appropriate
+ for all systems which have the necessary
+ metering. Implementation in such systems is
+ highly recommended."
+ ::= { etherCompliances 2 }
+
+ dot3Compliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION "The compliance statement for managed network
+ entities which have ethernet-like network
+ interfaces."
+
+ MODULE -- this module
+ MANDATORY-GROUPS { etherStatsBaseGroup }
+
+ GROUP etherDuplexGroup
+ DESCRIPTION "This group is mandatory for all
+ ethernet-like network interfaces which are
+ capable of operating in full-duplex mode.
+ It is highly recommended for all
+
+ ethernet-like network interfaces."
+
+ GROUP etherStatsLowSpeedGroup
+ DESCRIPTION "This group is mandatory for all
+ ethernet-like network interfaces which are
+ capable of operating at 10 Mb/s or slower in
+ half-duplex mode."
+
+ GROUP etherStatsHighSpeedGroup
+ DESCRIPTION "This group is mandatory for all
+ ethernet-like network interfaces which are
+ capable of operating at 100 Mb/s or faster."
+
+ GROUP etherControlGroup
+ DESCRIPTION "This group is mandatory for all
+ ethernet-like network interfaces that
+ support the MAC Control sublayer."
+
+ GROUP etherControlPauseGroup
+ DESCRIPTION "This group is mandatory for all
+ ethernet-like network interfaces that
+ support the MAC Control PAUSE function."
+
+ GROUP etherCollisionTableGroup
+ DESCRIPTION "This group is optional. It is appropriate
+ for all ethernet-like network interfaces
+ which are capable of operating in
+ half-duplex mode and have the necessary
+ metering. Implementation in systems with
+ such interfaces is highly recommended."
+ ::= { etherCompliances 3 }
+
+ -- units of conformance
+
+ etherStatsGroup OBJECT-GROUP
+ OBJECTS { dot3StatsIndex,
+ dot3StatsAlignmentErrors,
+ dot3StatsFCSErrors,
+ dot3StatsSingleCollisionFrames,
+ dot3StatsMultipleCollisionFrames,
+ dot3StatsSQETestErrors,
+ dot3StatsDeferredTransmissions,
+ dot3StatsLateCollisions,
+ dot3StatsExcessiveCollisions,
+ dot3StatsInternalMacTransmitErrors,
+ dot3StatsCarrierSenseErrors,
+ dot3StatsFrameTooLongs,
+ dot3StatsInternalMacReceiveErrors,
+ dot3StatsEtherChipSet
+ }
+ STATUS deprecated
+ DESCRIPTION "********* THIS GROUP IS DEPRECATED **********
+
+ A collection of objects providing information
+ applicable to all ethernet-like network
+ interfaces.
+
+ This object group has been deprecated and
+ replaced by etherStatsBaseGroup and
+ etherStatsLowSpeedGroup."
+ ::= { etherGroups 1 }
+
+ etherCollisionTableGroup OBJECT-GROUP
+ OBJECTS { dot3CollFrequencies
+ }
+ STATUS current
+ DESCRIPTION "A collection of objects providing a histogram
+ of packets successfully transmitted after
+ experiencing exactly N collisions."
+ ::= { etherGroups 2 }
+
+ etherStats100MbsGroup OBJECT-GROUP
+ OBJECTS { dot3StatsIndex,
+ dot3StatsAlignmentErrors,
+ dot3StatsFCSErrors,
+ dot3StatsSingleCollisionFrames,
+ dot3StatsMultipleCollisionFrames,
+ dot3StatsDeferredTransmissions,
+ dot3StatsLateCollisions,
+ dot3StatsExcessiveCollisions,
+ dot3StatsInternalMacTransmitErrors,
+ dot3StatsCarrierSenseErrors,
+ dot3StatsFrameTooLongs,
+ dot3StatsInternalMacReceiveErrors,
+ dot3StatsEtherChipSet,
+ dot3StatsSymbolErrors
+ }
+ STATUS deprecated
+ DESCRIPTION "********* THIS GROUP IS DEPRECATED **********
+
+ A collection of objects providing information
+ applicable to 100 Mb/sec ethernet-like network
+ interfaces.
+
+ This object group has been deprecated and
+
+ replaced by etherStatsBaseGroup and
+ etherStatsHighSpeedGroup."
+ ::= { etherGroups 3 }
+
+ etherStatsBaseGroup OBJECT-GROUP
+ OBJECTS { dot3StatsIndex,
+ dot3StatsAlignmentErrors,
+ dot3StatsFCSErrors,
+ dot3StatsSingleCollisionFrames,
+ dot3StatsMultipleCollisionFrames,
+ dot3StatsDeferredTransmissions,
+ dot3StatsLateCollisions,
+ dot3StatsExcessiveCollisions,
+ dot3StatsInternalMacTransmitErrors,
+ dot3StatsCarrierSenseErrors,
+ dot3StatsFrameTooLongs,
+ dot3StatsInternalMacReceiveErrors
+ }
+ STATUS current
+ DESCRIPTION "A collection of objects providing information
+ applicable to all ethernet-like network
+ interfaces."
+ ::= { etherGroups 4 }
+
+ etherStatsLowSpeedGroup OBJECT-GROUP
+ OBJECTS { dot3StatsSQETestErrors }
+ STATUS current
+ DESCRIPTION "A collection of objects providing information
+ applicable to ethernet-like network interfaces
+ capable of operating at 10 Mb/s or slower in
+ half-duplex mode."
+ ::= { etherGroups 5 }
+
+ etherStatsHighSpeedGroup OBJECT-GROUP
+ OBJECTS { dot3StatsSymbolErrors }
+ STATUS current
+ DESCRIPTION "A collection of objects providing information
+ applicable to ethernet-like network interfaces
+ capable of operating at 100 Mb/s or faster."
+ ::= { etherGroups 6 }
+
+ etherDuplexGroup OBJECT-GROUP
+ OBJECTS { dot3StatsDuplexStatus }
+ STATUS current
+ DESCRIPTION "A collection of objects providing information
+ about the duplex mode of an ethernet-like
+ network interface."
+ ::= { etherGroups 7 }
+
+ etherControlGroup OBJECT-GROUP
+ OBJECTS { dot3ControlFunctionsSupported,
+ dot3ControlInUnknownOpcodes
+ }
+ STATUS current
+ DESCRIPTION "A collection of objects providing information
+ about the MAC Control sublayer on ethernet-like
+ network interfaces."
+ ::= { etherGroups 8 }
+
+ etherControlPauseGroup OBJECT-GROUP
+ OBJECTS { dot3PauseAdminMode,
+ dot3PauseOperMode,
+ dot3InPauseFrames,
+ dot3OutPauseFrames
+ }
+ STATUS current
+ DESCRIPTION "A collection of objects providing information
+ about and control of the MAC Control PAUSE
+ function on ethernet-like network interfaces."
+ ::= { etherGroups 9 }
+
+END
projects / bcm963xx.git / blobdiff