finally in sync with archive

[bcm963xx.git] / userapps / opensource / net-snmp / mibs / IPV6-UDP-MIB.txt

diff --git a/userapps/opensource/net-snmp/mibs/IPV6-UDP-MIB.txt b/userapps/opensource/net-snmp/mibs/IPV6-UDP-MIB.txt
deleted file mode 100755 (executable)
index 6c929eb..0000000
--- a/userapps/opensource/net-snmp/mibs/IPV6-UDP-MIB.txt
+++ /dev/null
@@ -1,141 +0,0 @@
-IPV6-UDP-MIB DEFINITIONS ::= BEGIN
-
-IMPORTS
-   MODULE-COMPLIANCE, OBJECT-GROUP      FROM SNMPv2-CONF
-   MODULE-IDENTITY, OBJECT-TYPE,
-   mib-2, experimental                  FROM SNMPv2-SMI
-   Ipv6Address, Ipv6IfIndexOrZero       FROM IPV6-TC;
-
-ipv6UdpMIB MODULE-IDENTITY
-   LAST-UPDATED "9801290000Z"
-   ORGANIZATION "IETF IPv6 MIB Working Group"
-   CONTACT-INFO
-        "               Mike Daniele
-
-                Postal: Compaq Computer Corporation
-                        110 Spitbrook Rd
-                        Nashua, NH 03062.
-                        US
-
-                Phone:  +1 603 884 1423
-                Email:  daniele@zk3.dec.com"
-   DESCRIPTION
-        "The MIB module for entities implementing UDP over IPv6."
-   ::= { experimental 87 }
-
--- objects specific to UDP for IPv6
-
-udp      OBJECT IDENTIFIER ::= { mib-2 7 }
-
--- the UDP over IPv6 Listener table
-
--- This table contains information about this entity's
--- UDP/IPv6 endpoints.  Only endpoints utilizing IPv6 addresses
--- are contained in this table.  This entity's UDP/IPv4 endpoints
--- are contained in udpTable.
-
-ipv6UdpTable OBJECT-TYPE
-   SYNTAX      SEQUENCE OF Ipv6UdpEntry
-   MAX-ACCESS  not-accessible
-   STATUS      current
-   DESCRIPTION
-        "A table containing UDP listener information for
-         UDP/IPv6 endpoints."
-   ::= { udp 6 }
-
-ipv6UdpEntry OBJECT-TYPE
-   SYNTAX      Ipv6UdpEntry
-   MAX-ACCESS  not-accessible
-   STATUS      current
-   DESCRIPTION
-        "Information about a particular current UDP listener.
-
-         Note that conceptual rows in this table require an
-         additional index object compared to udpTable, since
-         IPv6 addresses are not guaranteed to be unique on the
-         managed node."
-   INDEX   { ipv6UdpLocalAddress,
-             ipv6UdpLocalPort,
-             ipv6UdpIfIndex }
-   ::= { ipv6UdpTable 1 }
-
-Ipv6UdpEntry ::= SEQUENCE {
-   ipv6UdpLocalAddress    Ipv6Address,
-   ipv6UdpLocalPort       INTEGER (0..65535),
-   ipv6UdpIfIndex         Ipv6IfIndexOrZero }
-
-ipv6UdpLocalAddress OBJECT-TYPE
-   SYNTAX       Ipv6Address
-   MAX-ACCESS   not-accessible
-   STATUS       current
-   DESCRIPTION
-        "The local IPv6 address for this UDP listener.
-         In the case of a UDP listener which is willing
-         to accept datagrams for any IPv6 address
-         associated with the managed node, the value ::0
-         is used."
-   ::= { ipv6UdpEntry 1 }
-
-ipv6UdpLocalPort OBJECT-TYPE
-    SYNTAX     INTEGER (0..65535)
-    MAX-ACCESS not-accessible
-    STATUS     current
-    DESCRIPTION
-        "The local port number for this UDP listener."
-    ::= { ipv6UdpEntry 2 }
-
-ipv6UdpIfIndex OBJECT-TYPE
-   SYNTAX     Ipv6IfIndexOrZero
-   MAX-ACCESS   read-only
-   STATUS     current
-   DESCRIPTION
-        "An index object used to disambiguate conceptual rows in
-         the table, since the ipv6UdpLocalAddress/ipv6UdpLocalPort
-         pair may not be unique.
-
-         This object identifies the local interface that is
-         associated with ipv6UdpLocalAddress for this UDP listener.
-         If such a local interface cannot be determined, this object
-         should take on the value 0.  (A possible example of this
-         would be if the value of ipv6UdpLocalAddress is ::0.)
-
-         The interface identified by a particular non-0 value of
-         this index is the same interface as identified by the same
-         value of ipv6IfIndex.
-
-         The value of this object must remain constant during
-         the life of this UDP endpoint."
-   ::= { ipv6UdpEntry 3 }
-
---
--- conformance information
---
-
-ipv6UdpConformance OBJECT IDENTIFIER ::= { ipv6UdpMIB 2 }
-
-ipv6UdpCompliances OBJECT IDENTIFIER ::= { ipv6UdpConformance 1 }
-ipv6UdpGroups      OBJECT IDENTIFIER ::= { ipv6UdpConformance 2 }
-
--- compliance statements
-
-ipv6UdpCompliance MODULE-COMPLIANCE
-   STATUS  current
-   DESCRIPTION
-        "The compliance statement for SNMPv2 entities which
-         implement UDP over IPv6."
-   MODULE  -- this module
-   MANDATORY-GROUPS { ipv6UdpGroup }
-   ::= { ipv6UdpCompliances 1 }
-
-ipv6UdpGroup OBJECT-GROUP
-   OBJECTS   { -- these are defined in this module
-               -- ipv6UdpLocalAddress (not-accessible)
-               -- ipv6UdpLocalPort (not-accessible)
-               ipv6UdpIfIndex }
-   STATUS    current
-   DESCRIPTION
-        "The group of objects providing management of
-         UDP over IPv6."
-   ::= { ipv6UdpGroups 1 }
-
-END