+++ /dev/null
-SNMP-NOTIFICATION-MIB DEFINITIONS ::= BEGIN
-
-IMPORTS
- MODULE-IDENTITY,
- OBJECT-TYPE,
- snmpModules
- FROM SNMPv2-SMI
-
- RowStatus,
- StorageType
- FROM SNMPv2-TC
-
- SnmpAdminString
- FROM SNMP-FRAMEWORK-MIB
-
- SnmpTagValue,
- snmpTargetParamsName
- FROM SNMP-TARGET-MIB
-
- MODULE-COMPLIANCE,
- OBJECT-GROUP
- FROM SNMPv2-CONF;
-
-snmpNotificationMIB MODULE-IDENTITY
- LAST-UPDATED "200210140000Z"
- ORGANIZATION "IETF SNMPv3 Working Group"
- CONTACT-INFO
- "WG-email: snmpv3@lists.tislabs.com
- Subscribe: majordomo@lists.tislabs.com
- In message body: subscribe snmpv3
-
- Co-Chair: Russ Mundy
- Network Associates Laboratories
- Postal: 15204 Omega Drive, Suite 300
- Rockville, MD 20850-4601
- USA
- EMail: mundy@tislabs.com
- Phone: +1 301-947-7107
-
- Co-Chair: David Harrington
- Enterasys Networks
- Postal: 35 Industrial Way
- P. O. Box 5004
- Rochester, New Hampshire 03866-5005
- USA
- EMail: dbh@enterasys.com
- Phone: +1 603-337-2614
-
- Co-editor: David B. Levi
- Nortel Networks
- Postal: 3505 Kesterwood Drive
- Knoxville, Tennessee 37918
- EMail: dlevi@nortelnetworks.com
- Phone: +1 865 686 0432
-
- Co-editor: Paul Meyer
- Secure Computing Corporation
- Postal: 2675 Long Lake Road
- Roseville, Minnesota 55113
- EMail: paul_meyer@securecomputing.com
- Phone: +1 651 628 1592
-
- Co-editor: Bob Stewart
- Retired"
- DESCRIPTION
- "This MIB module defines MIB objects which provide
- mechanisms to remotely configure the parameters
- used by an SNMP entity for the generation of
- notifications.
-
- Copyright (C) The Internet Society (2002). This
- version of this MIB module is part of RFC 3413;
- see the RFC itself for full legal notices.
- "
- REVISION "200210140000Z" -- 14 October 2002
- DESCRIPTION "Clarifications, published as
- RFC 3413."
- REVISION "199808040000Z" -- 4 August 1998
- DESCRIPTION "Clarifications, published as
- RFC 2573."
- REVISION "199707140000Z" -- 14 July 1997
- DESCRIPTION "The initial revision, published as RFC2273."
- ::= { snmpModules 13 }
-
-snmpNotifyObjects OBJECT IDENTIFIER ::=
- { snmpNotificationMIB 1 }
-snmpNotifyConformance OBJECT IDENTIFIER ::=
- { snmpNotificationMIB 3 }
-
---
---
--- The snmpNotifyObjects group
---
---
-
-snmpNotifyTable OBJECT-TYPE
- SYNTAX SEQUENCE OF SnmpNotifyEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to select management targets which should
- receive notifications, as well as the type of notification
- which should be sent to each selected management target."
- ::= { snmpNotifyObjects 1 }
-
-snmpNotifyEntry OBJECT-TYPE
- SYNTAX SnmpNotifyEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "An entry in this table selects a set of management targets
- which should receive notifications, as well as the type of
-
- notification which should be sent to each selected
- management target.
-
- Entries in the snmpNotifyTable are created and
- deleted using the snmpNotifyRowStatus object."
- INDEX { IMPLIED snmpNotifyName }
- ::= { snmpNotifyTable 1 }
-
-SnmpNotifyEntry ::= SEQUENCE {
- snmpNotifyName SnmpAdminString,
- snmpNotifyTag SnmpTagValue,
- snmpNotifyType INTEGER,
- snmpNotifyStorageType StorageType,
- snmpNotifyRowStatus RowStatus
-}
-
-snmpNotifyName OBJECT-TYPE
- SYNTAX SnmpAdminString (SIZE(1..32))
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "The locally arbitrary, but unique identifier associated
- with this snmpNotifyEntry."
- ::= { snmpNotifyEntry 1 }
-
-snmpNotifyTag OBJECT-TYPE
- SYNTAX SnmpTagValue
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object contains a single tag value which is used
- to select entries in the snmpTargetAddrTable. Any entry
- in the snmpTargetAddrTable which contains a tag value
- which is equal to the value of an instance of this
- object is selected. If this object contains a value
- of zero length, no entries are selected."
- DEFVAL { "" }
- ::= { snmpNotifyEntry 2 }
-
-snmpNotifyType OBJECT-TYPE
- SYNTAX INTEGER {
- trap(1),
- inform(2)
- }
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object determines the type of notification to
-
- be generated for entries in the snmpTargetAddrTable
- selected by the corresponding instance of
- snmpNotifyTag. This value is only used when
- generating notifications, and is ignored when
- using the snmpTargetAddrTable for other purposes.
-
- If the value of this object is trap(1), then any
- messages generated for selected rows will contain
- Unconfirmed-Class PDUs.
-
- If the value of this object is inform(2), then any
- messages generated for selected rows will contain
- Confirmed-Class PDUs.
-
- Note that if an SNMP entity only supports
- generation of Unconfirmed-Class PDUs (and not
- Confirmed-Class PDUs), then this object may be
- read-only."
- DEFVAL { trap }
- ::= { snmpNotifyEntry 3 }
-
-snmpNotifyStorageType OBJECT-TYPE
- SYNTAX StorageType
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "The storage type for this conceptual row.
- Conceptual rows having the value 'permanent' need not
- allow write-access to any columnar objects in the row."
- DEFVAL { nonVolatile }
- ::= { snmpNotifyEntry 4 }
-
-snmpNotifyRowStatus OBJECT-TYPE
- SYNTAX RowStatus
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "The status of this conceptual row.
-
- To create a row in this table, a manager must
- set this object to either createAndGo(4) or
- createAndWait(5)."
- ::= { snmpNotifyEntry 5 }
-
-snmpNotifyFilterProfileTable OBJECT-TYPE
- SYNTAX SEQUENCE OF SnmpNotifyFilterProfileEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to associate a notification filter
- profile with a particular set of target parameters."
- ::= { snmpNotifyObjects 2 }
-
-snmpNotifyFilterProfileEntry OBJECT-TYPE
- SYNTAX SnmpNotifyFilterProfileEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "An entry in this table indicates the name of the filter
- profile to be used when generating notifications using
- the corresponding entry in the snmpTargetParamsTable.
-
- Entries in the snmpNotifyFilterProfileTable are created
- and deleted using the snmpNotifyFilterProfileRowStatus
- object."
- INDEX { IMPLIED snmpTargetParamsName }
- ::= { snmpNotifyFilterProfileTable 1 }
-
-SnmpNotifyFilterProfileEntry ::= SEQUENCE {
- snmpNotifyFilterProfileName SnmpAdminString,
- snmpNotifyFilterProfileStorType StorageType,
- snmpNotifyFilterProfileRowStatus RowStatus
-}
-
-snmpNotifyFilterProfileName OBJECT-TYPE
- SYNTAX SnmpAdminString (SIZE(1..32))
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "The name of the filter profile to be used when generating
- notifications using the corresponding entry in the
- snmpTargetAddrTable."
- ::= { snmpNotifyFilterProfileEntry 1 }
-
-snmpNotifyFilterProfileStorType OBJECT-TYPE
- SYNTAX StorageType
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "The storage type for this conceptual row.
- Conceptual rows having the value 'permanent' need not
- allow write-access to any columnar objects in the row."
- DEFVAL { nonVolatile }
- ::= { snmpNotifyFilterProfileEntry 2 }
-
-snmpNotifyFilterProfileRowStatus OBJECT-TYPE
- SYNTAX RowStatus
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "The status of this conceptual row.
-
- To create a row in this table, a manager must
- set this object to either createAndGo(4) or
- createAndWait(5).
-
- Until instances of all corresponding columns are
- appropriately configured, the value of the
- corresponding instance of the
- snmpNotifyFilterProfileRowStatus column is 'notReady'.
-
- In particular, a newly created row cannot be made
- active until the corresponding instance of
- snmpNotifyFilterProfileName has been set."
- ::= { snmpNotifyFilterProfileEntry 3 }
-
-snmpNotifyFilterTable OBJECT-TYPE
- SYNTAX SEQUENCE OF SnmpNotifyFilterEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "The table of filter profiles. Filter profiles are used
- to determine whether particular management targets should
- receive particular notifications.
-
- When a notification is generated, it must be compared
- with the filters associated with each management target
- which is configured to receive notifications, in order to
- determine whether it may be sent to each such management
- target.
-
- A more complete discussion of notification filtering
- can be found in section 6. of [SNMP-APPL]."
- ::= { snmpNotifyObjects 3 }
-
-snmpNotifyFilterEntry OBJECT-TYPE
- SYNTAX SnmpNotifyFilterEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "An element of a filter profile.
-
- Entries in the snmpNotifyFilterTable are created and
- deleted using the snmpNotifyFilterRowStatus object."
- INDEX { snmpNotifyFilterProfileName,
- IMPLIED snmpNotifyFilterSubtree }
- ::= { snmpNotifyFilterTable 1 }
-
-SnmpNotifyFilterEntry ::= SEQUENCE {
- snmpNotifyFilterSubtree OBJECT IDENTIFIER,
- snmpNotifyFilterMask OCTET STRING,
- snmpNotifyFilterType INTEGER,
- snmpNotifyFilterStorageType StorageType,
- snmpNotifyFilterRowStatus RowStatus
-}
-
-snmpNotifyFilterSubtree OBJECT-TYPE
- SYNTAX OBJECT IDENTIFIER
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "The MIB subtree which, when combined with the corresponding
- instance of snmpNotifyFilterMask, defines a family of
- subtrees which are included in or excluded from the
- filter profile."
- ::= { snmpNotifyFilterEntry 1 }
-
-snmpNotifyFilterMask OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE(0..16))
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "The bit mask which, in combination with the corresponding
- instance of snmpNotifyFilterSubtree, defines a family of
- subtrees which are included in or excluded from the
- filter profile.
-
- Each bit of this bit mask corresponds to a
- sub-identifier of snmpNotifyFilterSubtree, with the
- most significant bit of the i-th octet of this octet
- string value (extended if necessary, see below)
- corresponding to the (8*i - 7)-th sub-identifier, and
- the least significant bit of the i-th octet of this
- octet string corresponding to the (8*i)-th
- sub-identifier, where i is in the range 1 through 16.
-
- Each bit of this bit mask specifies whether or not
- the corresponding sub-identifiers must match when
- determining if an OBJECT IDENTIFIER matches this
- family of filter subtrees; a '1' indicates that an
- exact match must occur; a '0' indicates 'wild card',
- i.e., any sub-identifier value matches.
-
- Thus, the OBJECT IDENTIFIER X of an object instance
- is contained in a family of filter subtrees if, for
- each sub-identifier of the value of
- snmpNotifyFilterSubtree, either:
-
- the i-th bit of snmpNotifyFilterMask is 0, or
-
- the i-th sub-identifier of X is equal to the i-th
- sub-identifier of the value of
- snmpNotifyFilterSubtree.
-
- If the value of this bit mask is M bits long and
- there are more than M sub-identifiers in the
- corresponding instance of snmpNotifyFilterSubtree,
- then the bit mask is extended with 1's to be the
- required length.
-
- Note that when the value of this object is the
- zero-length string, this extension rule results in
- a mask of all-1's being used (i.e., no 'wild card'),
- and the family of filter subtrees is the one
- subtree uniquely identified by the corresponding
- instance of snmpNotifyFilterSubtree."
- DEFVAL { ''H }
- ::= { snmpNotifyFilterEntry 2 }
-
-snmpNotifyFilterType OBJECT-TYPE
- SYNTAX INTEGER {
- included(1),
- excluded(2)
- }
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object indicates whether the family of filter subtrees
- defined by this entry are included in or excluded from a
- filter. A more detailed discussion of the use of this
- object can be found in section 6. of [SNMP-APPL]."
- DEFVAL { included }
- ::= { snmpNotifyFilterEntry 3 }
-
-snmpNotifyFilterStorageType OBJECT-TYPE
- SYNTAX StorageType
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "The storage type for this conceptual row.
- Conceptual rows having the value 'permanent' need not
-
- allow write-access to any columnar objects in the row."
- DEFVAL { nonVolatile }
- ::= { snmpNotifyFilterEntry 4 }
-
-snmpNotifyFilterRowStatus OBJECT-TYPE
- SYNTAX RowStatus
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "The status of this conceptual row.
-
- To create a row in this table, a manager must
- set this object to either createAndGo(4) or
- createAndWait(5)."
- ::= { snmpNotifyFilterEntry 5 }
-
---
---
--- Conformance information
---
---
-
-snmpNotifyCompliances OBJECT IDENTIFIER ::=
- { snmpNotifyConformance 1 }
-snmpNotifyGroups OBJECT IDENTIFIER ::=
- { snmpNotifyConformance 2 }
-
---
---
--- Compliance statements
---
---
-
-snmpNotifyBasicCompliance MODULE-COMPLIANCE
- STATUS current
- DESCRIPTION
- "The compliance statement for minimal SNMP entities which
- implement only SNMP Unconfirmed-Class notifications and
- read-create operations on only the snmpTargetAddrTable."
- MODULE SNMP-TARGET-MIB
- MANDATORY-GROUPS { snmpTargetBasicGroup }
-
- OBJECT snmpTargetParamsMPModel
- MIN-ACCESS read-only
- DESCRIPTION
- "Create/delete/modify access is not required."
-
- OBJECT snmpTargetParamsSecurityModel
- MIN-ACCESS read-only
- DESCRIPTION
- "Create/delete/modify access is not required."
-
- OBJECT snmpTargetParamsSecurityName
- MIN-ACCESS read-only
- DESCRIPTION
- "Create/delete/modify access is not required."
-
- OBJECT snmpTargetParamsSecurityLevel
- MIN-ACCESS read-only
- DESCRIPTION
- "Create/delete/modify access is not required."
-
- OBJECT snmpTargetParamsStorageType
- SYNTAX INTEGER {
- readOnly(5)
- }
- MIN-ACCESS read-only
- DESCRIPTION
- "Create/delete/modify access is not required.
- Support of the values other(1), volatile(2),
- nonVolatile(3), and permanent(4) is not required."
-
- OBJECT snmpTargetParamsRowStatus
- SYNTAX INTEGER {
- active(1)
- }
- MIN-ACCESS read-only
- DESCRIPTION
- "Create/delete/modify access to the
- snmpTargetParamsTable is not required.
- Support of the values notInService(2), notReady(3),
- createAndGo(4), createAndWait(5), and destroy(6) is
- not required."
-
- MODULE -- This Module
- MANDATORY-GROUPS { snmpNotifyGroup }
-
- OBJECT snmpNotifyTag
- MIN-ACCESS read-only
- DESCRIPTION
- "Create/delete/modify access is not required."
-
- OBJECT snmpNotifyType
- SYNTAX INTEGER {
- trap(1)
- }
- MIN-ACCESS read-only
- DESCRIPTION
- "Create/delete/modify access is not required.
- Support of the value notify(2) is not required."
-
- OBJECT snmpNotifyStorageType
- SYNTAX INTEGER {
- readOnly(5)
- }
- MIN-ACCESS read-only
- DESCRIPTION
- "Create/delete/modify access is not required.
- Support of the values other(1), volatile(2),
- nonVolatile(3), and permanent(4) is not required."
-
- OBJECT snmpNotifyRowStatus
- SYNTAX INTEGER {
- active(1)
- }
- MIN-ACCESS read-only
- DESCRIPTION
- "Create/delete/modify access to the
- snmpNotifyTable is not required.
- Support of the values notInService(2), notReady(3),
- createAndGo(4), createAndWait(5), and destroy(6) is
- not required."
- ::= { snmpNotifyCompliances 1 }
-
-snmpNotifyBasicFiltersCompliance MODULE-COMPLIANCE
- STATUS current
- DESCRIPTION
- "The compliance statement for SNMP entities which implement
- SNMP Unconfirmed-Class notifications with filtering, and
- read-create operations on all related tables."
- MODULE SNMP-TARGET-MIB
- MANDATORY-GROUPS { snmpTargetBasicGroup }
- MODULE -- This Module
- MANDATORY-GROUPS { snmpNotifyGroup,
- snmpNotifyFilterGroup }
- ::= { snmpNotifyCompliances 2 }
-
-snmpNotifyFullCompliance MODULE-COMPLIANCE
- STATUS current
- DESCRIPTION
- "The compliance statement for SNMP entities which either
- implement only SNMP Confirmed-Class notifications, or both
- SNMP Unconfirmed-Class and Confirmed-Class notifications,
- plus filtering and read-create operations on all related
- tables."
- MODULE SNMP-TARGET-MIB
- MANDATORY-GROUPS { snmpTargetBasicGroup,
- snmpTargetResponseGroup }
- MODULE -- This Module
- MANDATORY-GROUPS { snmpNotifyGroup,
- snmpNotifyFilterGroup }
- ::= { snmpNotifyCompliances 3 }
-
-snmpNotifyGroup OBJECT-GROUP
- OBJECTS {
- snmpNotifyTag,
- snmpNotifyType,
- snmpNotifyStorageType,
- snmpNotifyRowStatus
- }
- STATUS current
- DESCRIPTION
- "A collection of objects for selecting which management
- targets are used for generating notifications, and the
- type of notification to be generated for each selected
- management target."
- ::= { snmpNotifyGroups 1 }
-
-snmpNotifyFilterGroup OBJECT-GROUP
- OBJECTS {
- snmpNotifyFilterProfileName,
- snmpNotifyFilterProfileStorType,
- snmpNotifyFilterProfileRowStatus,
- snmpNotifyFilterMask,
- snmpNotifyFilterType,
- snmpNotifyFilterStorageType,
- snmpNotifyFilterRowStatus
- }
- STATUS current
- DESCRIPTION
- "A collection of objects providing remote configuration
- of notification filters."
- ::= { snmpNotifyGroups 2 }
-
-END
projects / bcm963xx.git / blobdiff