--- /dev/null
+SNMP-NOTIFICATION-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY,
+ OBJECT-TYPE,
+ snmpModules
+ FROM SNMPv2-SMI
+
+ RowStatus,
+ StorageType
+ FROM SNMPv2-TC
+
+ SnmpAdminString
+ FROM SNMP-FRAMEWORK-MIB
+
+ SnmpTagValue,
+ snmpTargetParamsName
+ FROM SNMP-TARGET-MIB
+
+ MODULE-COMPLIANCE,
+ OBJECT-GROUP
+ FROM SNMPv2-CONF;
+
+snmpNotificationMIB MODULE-IDENTITY
+ LAST-UPDATED "200210140000Z"
+ ORGANIZATION "IETF SNMPv3 Working Group"
+ CONTACT-INFO
+ "WG-email: snmpv3@lists.tislabs.com
+ Subscribe: majordomo@lists.tislabs.com
+ In message body: subscribe snmpv3
+
+ Co-Chair: Russ Mundy
+ Network Associates Laboratories
+ Postal: 15204 Omega Drive, Suite 300
+ Rockville, MD 20850-4601
+ USA
+ EMail: mundy@tislabs.com
+ Phone: +1 301-947-7107
+
+ Co-Chair: David Harrington
+ Enterasys Networks
+ Postal: 35 Industrial Way
+ P. O. Box 5004
+ Rochester, New Hampshire 03866-5005
+ USA
+ EMail: dbh@enterasys.com
+ Phone: +1 603-337-2614
+
+ Co-editor: David B. Levi
+ Nortel Networks
+ Postal: 3505 Kesterwood Drive
+ Knoxville, Tennessee 37918
+ EMail: dlevi@nortelnetworks.com
+ Phone: +1 865 686 0432
+
+ Co-editor: Paul Meyer
+ Secure Computing Corporation
+ Postal: 2675 Long Lake Road
+ Roseville, Minnesota 55113
+ EMail: paul_meyer@securecomputing.com
+ Phone: +1 651 628 1592
+
+ Co-editor: Bob Stewart
+ Retired"
+ DESCRIPTION
+ "This MIB module defines MIB objects which provide
+ mechanisms to remotely configure the parameters
+ used by an SNMP entity for the generation of
+ notifications.
+
+ Copyright (C) The Internet Society (2002). This
+ version of this MIB module is part of RFC 3413;
+ see the RFC itself for full legal notices.
+ "
+ REVISION "200210140000Z" -- 14 October 2002
+ DESCRIPTION "Clarifications, published as
+ RFC 3413."
+ REVISION "199808040000Z" -- 4 August 1998
+ DESCRIPTION "Clarifications, published as
+ RFC 2573."
+ REVISION "199707140000Z" -- 14 July 1997
+ DESCRIPTION "The initial revision, published as RFC2273."
+ ::= { snmpModules 13 }
+
+snmpNotifyObjects OBJECT IDENTIFIER ::=
+ { snmpNotificationMIB 1 }
+snmpNotifyConformance OBJECT IDENTIFIER ::=
+ { snmpNotificationMIB 3 }
+
+--
+--
+-- The snmpNotifyObjects group
+--
+--
+
+snmpNotifyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SnmpNotifyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is used to select management targets which should
+ receive notifications, as well as the type of notification
+ which should be sent to each selected management target."
+ ::= { snmpNotifyObjects 1 }
+
+snmpNotifyEntry OBJECT-TYPE
+ SYNTAX SnmpNotifyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in this table selects a set of management targets
+ which should receive notifications, as well as the type of
+
+ notification which should be sent to each selected
+ management target.
+
+ Entries in the snmpNotifyTable are created and
+ deleted using the snmpNotifyRowStatus object."
+ INDEX { IMPLIED snmpNotifyName }
+ ::= { snmpNotifyTable 1 }
+
+SnmpNotifyEntry ::= SEQUENCE {
+ snmpNotifyName SnmpAdminString,
+ snmpNotifyTag SnmpTagValue,
+ snmpNotifyType INTEGER,
+ snmpNotifyStorageType StorageType,
+ snmpNotifyRowStatus RowStatus
+}
+
+snmpNotifyName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The locally arbitrary, but unique identifier associated
+ with this snmpNotifyEntry."
+ ::= { snmpNotifyEntry 1 }
+
+snmpNotifyTag OBJECT-TYPE
+ SYNTAX SnmpTagValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object contains a single tag value which is used
+ to select entries in the snmpTargetAddrTable. Any entry
+ in the snmpTargetAddrTable which contains a tag value
+ which is equal to the value of an instance of this
+ object is selected. If this object contains a value
+ of zero length, no entries are selected."
+ DEFVAL { "" }
+ ::= { snmpNotifyEntry 2 }
+
+snmpNotifyType OBJECT-TYPE
+ SYNTAX INTEGER {
+ trap(1),
+ inform(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object determines the type of notification to
+
+ be generated for entries in the snmpTargetAddrTable
+ selected by the corresponding instance of
+ snmpNotifyTag. This value is only used when
+ generating notifications, and is ignored when
+ using the snmpTargetAddrTable for other purposes.
+
+ If the value of this object is trap(1), then any
+ messages generated for selected rows will contain
+ Unconfirmed-Class PDUs.
+
+ If the value of this object is inform(2), then any
+ messages generated for selected rows will contain
+ Confirmed-Class PDUs.
+
+ Note that if an SNMP entity only supports
+ generation of Unconfirmed-Class PDUs (and not
+ Confirmed-Class PDUs), then this object may be
+ read-only."
+ DEFVAL { trap }
+ ::= { snmpNotifyEntry 3 }
+
+snmpNotifyStorageType OBJECT-TYPE
+ SYNTAX StorageType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The storage type for this conceptual row.
+ Conceptual rows having the value 'permanent' need not
+ allow write-access to any columnar objects in the row."
+ DEFVAL { nonVolatile }
+ ::= { snmpNotifyEntry 4 }
+
+snmpNotifyRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row.
+
+ To create a row in this table, a manager must
+ set this object to either createAndGo(4) or
+ createAndWait(5)."
+ ::= { snmpNotifyEntry 5 }
+
+snmpNotifyFilterProfileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SnmpNotifyFilterProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is used to associate a notification filter
+ profile with a particular set of target parameters."
+ ::= { snmpNotifyObjects 2 }
+
+snmpNotifyFilterProfileEntry OBJECT-TYPE
+ SYNTAX SnmpNotifyFilterProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in this table indicates the name of the filter
+ profile to be used when generating notifications using
+ the corresponding entry in the snmpTargetParamsTable.
+
+ Entries in the snmpNotifyFilterProfileTable are created
+ and deleted using the snmpNotifyFilterProfileRowStatus
+ object."
+ INDEX { IMPLIED snmpTargetParamsName }
+ ::= { snmpNotifyFilterProfileTable 1 }
+
+SnmpNotifyFilterProfileEntry ::= SEQUENCE {
+ snmpNotifyFilterProfileName SnmpAdminString,
+ snmpNotifyFilterProfileStorType StorageType,
+ snmpNotifyFilterProfileRowStatus RowStatus
+}
+
+snmpNotifyFilterProfileName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The name of the filter profile to be used when generating
+ notifications using the corresponding entry in the
+ snmpTargetAddrTable."
+ ::= { snmpNotifyFilterProfileEntry 1 }
+
+snmpNotifyFilterProfileStorType OBJECT-TYPE
+ SYNTAX StorageType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The storage type for this conceptual row.
+ Conceptual rows having the value 'permanent' need not
+ allow write-access to any columnar objects in the row."
+ DEFVAL { nonVolatile }
+ ::= { snmpNotifyFilterProfileEntry 2 }
+
+snmpNotifyFilterProfileRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row.
+
+ To create a row in this table, a manager must
+ set this object to either createAndGo(4) or
+ createAndWait(5).
+
+ Until instances of all corresponding columns are
+ appropriately configured, the value of the
+ corresponding instance of the
+ snmpNotifyFilterProfileRowStatus column is 'notReady'.
+
+ In particular, a newly created row cannot be made
+ active until the corresponding instance of
+ snmpNotifyFilterProfileName has been set."
+ ::= { snmpNotifyFilterProfileEntry 3 }
+
+snmpNotifyFilterTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SnmpNotifyFilterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table of filter profiles. Filter profiles are used
+ to determine whether particular management targets should
+ receive particular notifications.
+
+ When a notification is generated, it must be compared
+ with the filters associated with each management target
+ which is configured to receive notifications, in order to
+ determine whether it may be sent to each such management
+ target.
+
+ A more complete discussion of notification filtering
+ can be found in section 6. of [SNMP-APPL]."
+ ::= { snmpNotifyObjects 3 }
+
+snmpNotifyFilterEntry OBJECT-TYPE
+ SYNTAX SnmpNotifyFilterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An element of a filter profile.
+
+ Entries in the snmpNotifyFilterTable are created and
+ deleted using the snmpNotifyFilterRowStatus object."
+ INDEX { snmpNotifyFilterProfileName,
+ IMPLIED snmpNotifyFilterSubtree }
+ ::= { snmpNotifyFilterTable 1 }
+
+SnmpNotifyFilterEntry ::= SEQUENCE {
+ snmpNotifyFilterSubtree OBJECT IDENTIFIER,
+ snmpNotifyFilterMask OCTET STRING,
+ snmpNotifyFilterType INTEGER,
+ snmpNotifyFilterStorageType StorageType,
+ snmpNotifyFilterRowStatus RowStatus
+}
+
+snmpNotifyFilterSubtree OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The MIB subtree which, when combined with the corresponding
+ instance of snmpNotifyFilterMask, defines a family of
+ subtrees which are included in or excluded from the
+ filter profile."
+ ::= { snmpNotifyFilterEntry 1 }
+
+snmpNotifyFilterMask OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The bit mask which, in combination with the corresponding
+ instance of snmpNotifyFilterSubtree, defines a family of
+ subtrees which are included in or excluded from the
+ filter profile.
+
+ Each bit of this bit mask corresponds to a
+ sub-identifier of snmpNotifyFilterSubtree, with the
+ most significant bit of the i-th octet of this octet
+ string value (extended if necessary, see below)
+ corresponding to the (8*i - 7)-th sub-identifier, and
+ the least significant bit of the i-th octet of this
+ octet string corresponding to the (8*i)-th
+ sub-identifier, where i is in the range 1 through 16.
+
+ Each bit of this bit mask specifies whether or not
+ the corresponding sub-identifiers must match when
+ determining if an OBJECT IDENTIFIER matches this
+ family of filter subtrees; a '1' indicates that an
+ exact match must occur; a '0' indicates 'wild card',
+ i.e., any sub-identifier value matches.
+
+ Thus, the OBJECT IDENTIFIER X of an object instance
+ is contained in a family of filter subtrees if, for
+ each sub-identifier of the value of
+ snmpNotifyFilterSubtree, either:
+
+ the i-th bit of snmpNotifyFilterMask is 0, or
+
+ the i-th sub-identifier of X is equal to the i-th
+ sub-identifier of the value of
+ snmpNotifyFilterSubtree.
+
+ If the value of this bit mask is M bits long and
+ there are more than M sub-identifiers in the
+ corresponding instance of snmpNotifyFilterSubtree,
+ then the bit mask is extended with 1's to be the
+ required length.
+
+ Note that when the value of this object is the
+ zero-length string, this extension rule results in
+ a mask of all-1's being used (i.e., no 'wild card'),
+ and the family of filter subtrees is the one
+ subtree uniquely identified by the corresponding
+ instance of snmpNotifyFilterSubtree."
+ DEFVAL { ''H }
+ ::= { snmpNotifyFilterEntry 2 }
+
+snmpNotifyFilterType OBJECT-TYPE
+ SYNTAX INTEGER {
+ included(1),
+ excluded(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether the family of filter subtrees
+ defined by this entry are included in or excluded from a
+ filter. A more detailed discussion of the use of this
+ object can be found in section 6. of [SNMP-APPL]."
+ DEFVAL { included }
+ ::= { snmpNotifyFilterEntry 3 }
+
+snmpNotifyFilterStorageType OBJECT-TYPE
+ SYNTAX StorageType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The storage type for this conceptual row.
+ Conceptual rows having the value 'permanent' need not
+
+ allow write-access to any columnar objects in the row."
+ DEFVAL { nonVolatile }
+ ::= { snmpNotifyFilterEntry 4 }
+
+snmpNotifyFilterRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row.
+
+ To create a row in this table, a manager must
+ set this object to either createAndGo(4) or
+ createAndWait(5)."
+ ::= { snmpNotifyFilterEntry 5 }
+
+--
+--
+-- Conformance information
+--
+--
+
+snmpNotifyCompliances OBJECT IDENTIFIER ::=
+ { snmpNotifyConformance 1 }
+snmpNotifyGroups OBJECT IDENTIFIER ::=
+ { snmpNotifyConformance 2 }
+
+--
+--
+-- Compliance statements
+--
+--
+
+snmpNotifyBasicCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for minimal SNMP entities which
+ implement only SNMP Unconfirmed-Class notifications and
+ read-create operations on only the snmpTargetAddrTable."
+ MODULE SNMP-TARGET-MIB
+ MANDATORY-GROUPS { snmpTargetBasicGroup }
+
+ OBJECT snmpTargetParamsMPModel
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Create/delete/modify access is not required."
+
+ OBJECT snmpTargetParamsSecurityModel
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Create/delete/modify access is not required."
+
+ OBJECT snmpTargetParamsSecurityName
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Create/delete/modify access is not required."
+
+ OBJECT snmpTargetParamsSecurityLevel
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Create/delete/modify access is not required."
+
+ OBJECT snmpTargetParamsStorageType
+ SYNTAX INTEGER {
+ readOnly(5)
+ }
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Create/delete/modify access is not required.
+ Support of the values other(1), volatile(2),
+ nonVolatile(3), and permanent(4) is not required."
+
+ OBJECT snmpTargetParamsRowStatus
+ SYNTAX INTEGER {
+ active(1)
+ }
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Create/delete/modify access to the
+ snmpTargetParamsTable is not required.
+ Support of the values notInService(2), notReady(3),
+ createAndGo(4), createAndWait(5), and destroy(6) is
+ not required."
+
+ MODULE -- This Module
+ MANDATORY-GROUPS { snmpNotifyGroup }
+
+ OBJECT snmpNotifyTag
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Create/delete/modify access is not required."
+
+ OBJECT snmpNotifyType
+ SYNTAX INTEGER {
+ trap(1)
+ }
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Create/delete/modify access is not required.
+ Support of the value notify(2) is not required."
+
+ OBJECT snmpNotifyStorageType
+ SYNTAX INTEGER {
+ readOnly(5)
+ }
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Create/delete/modify access is not required.
+ Support of the values other(1), volatile(2),
+ nonVolatile(3), and permanent(4) is not required."
+
+ OBJECT snmpNotifyRowStatus
+ SYNTAX INTEGER {
+ active(1)
+ }
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Create/delete/modify access to the
+ snmpNotifyTable is not required.
+ Support of the values notInService(2), notReady(3),
+ createAndGo(4), createAndWait(5), and destroy(6) is
+ not required."
+ ::= { snmpNotifyCompliances 1 }
+
+snmpNotifyBasicFiltersCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for SNMP entities which implement
+ SNMP Unconfirmed-Class notifications with filtering, and
+ read-create operations on all related tables."
+ MODULE SNMP-TARGET-MIB
+ MANDATORY-GROUPS { snmpTargetBasicGroup }
+ MODULE -- This Module
+ MANDATORY-GROUPS { snmpNotifyGroup,
+ snmpNotifyFilterGroup }
+ ::= { snmpNotifyCompliances 2 }
+
+snmpNotifyFullCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for SNMP entities which either
+ implement only SNMP Confirmed-Class notifications, or both
+ SNMP Unconfirmed-Class and Confirmed-Class notifications,
+ plus filtering and read-create operations on all related
+ tables."
+ MODULE SNMP-TARGET-MIB
+ MANDATORY-GROUPS { snmpTargetBasicGroup,
+ snmpTargetResponseGroup }
+ MODULE -- This Module
+ MANDATORY-GROUPS { snmpNotifyGroup,
+ snmpNotifyFilterGroup }
+ ::= { snmpNotifyCompliances 3 }
+
+snmpNotifyGroup OBJECT-GROUP
+ OBJECTS {
+ snmpNotifyTag,
+ snmpNotifyType,
+ snmpNotifyStorageType,
+ snmpNotifyRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects for selecting which management
+ targets are used for generating notifications, and the
+ type of notification to be generated for each selected
+ management target."
+ ::= { snmpNotifyGroups 1 }
+
+snmpNotifyFilterGroup OBJECT-GROUP
+ OBJECTS {
+ snmpNotifyFilterProfileName,
+ snmpNotifyFilterProfileStorType,
+ snmpNotifyFilterProfileRowStatus,
+ snmpNotifyFilterMask,
+ snmpNotifyFilterType,
+ snmpNotifyFilterStorageType,
+ snmpNotifyFilterRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing remote configuration
+ of notification filters."
+ ::= { snmpNotifyGroups 2 }
+
+END
projects / bcm963xx.git / blobdiff