--- /dev/null
+#!./perl
+
+BEGIN {
+ unless(grep /blib/, @INC) {
+ chdir 't' if -d 't';
+ @INC = '../lib' if -d '../lib';
+ }
+}
+use Test;
+BEGIN { plan tests => 7 }
+use SNMP;
+use vars qw($agent_port $comm $agent_host);
+require "t/startagent.pl";
+
+
+my $junk_oid = ".1.3.6.1.2.1.1.1.1.1.1";
+my $oid = ".1.3.6.1.2.1.1.1";
+my $junk_name = 'fooDescr';
+my $junk_host = 'no.host.here';
+my $name = "gmarzot\@nortelnetworks.com";
+
+$SNMP::debugging = 0;
+$n = 15; # Number of tests to run
+
+#print "1..$n\n";
+if ($n == 0) { exit 0; }
+
+# create list of varbinds for GETS, val field can be null or omitted
+my $vars = new SNMP::VarList (
+ ['sysDescr', '0', ''],
+ ['sysObjectID', '0'],
+ ['sysUpTime', '0'],
+ ['sysContact', '0'],
+ ['sysName', '0'],
+ ['sysLocation', '0'],
+ ['sysServices', '0'],
+ ['ifNumber', '0'],
+ ['ifDescr', '1'],
+ ['ifSpeed', '1'],
+
+ ['snmpInPkts', '0'],
+ ['snmpInBadVersions', '0'],
+ ['snmpInBadCommunityNames', '0'],
+ ['snmpInBadCommunityUses', '0'],
+ ['snmpInASNParseErrs', '0'],
+ ['snmpEnableAuthenTraps', '0'],
+# ['snmpSilentDrops', '0'],
+# ['snmpProxyDrops', '0'],
+# ['snmpTrapEnterprise', '2'],
+
+# ['hrStorageType', '2'],
+# ['hrSystemDate', '0'],
+ ['sysORIndex', '1'],
+ ['sysORID', '2'],
+ ['sysORDescr', '3'],
+ ['sysORUpTime', '4'],
+# ['ifName', '1'],
+ ['sysORLastChange', '0'],
+ ['ipInHdrErrors', '0'],
+ ['ipDefaultTTL', '0'],
+ ['ipInHdrErrors', '0'],
+ );
+################################################################
+# ['ipNetToMediaPhysAddress', '0'],
+# ['ipAdEntAddr', '0'],
+# ['snmpTrapOID', '0'],
+# ['hrSystemNumUsers', '0'],
+# ['hrFSLastFullBackupDate', '0'],
+# ['ifPromiscuousMode', '0'],
+
+
+
+######################### 1 #######################################
+# Fire up a session.
+ my $s1 =
+ new SNMP::Session (DestHost=>$agent_host,Version=>1,Community=>$comm,RemotePort=>$agent_port);
+ ok(defined($s1));
+
+####################### 2 ##########################################
+# Set some value and see if the value is set properly.
+
+$originalLocation = $s1->get('sysLocation.0');
+$value = 'Router Management Labs';
+$s1->set('sysLocation.0', $value);
+$finalvalue = $s1->get('sysLocation.0');
+ok($originalLocation ne $finalvalue);
+#print STDERR "Error string = $s1->{ErrorStr}:$s1->{ErrorInd}\n";
+#print("set value is: $finalvalue\n\n");
+$s1->set('sysLocation.0', $originalLocation);
+
+######################## 3 #######################################
+
+# Now, reset that string with a non-string value.
+# This will FAIL. :)
+
+#$nonstrvalue = '.9.23.56.7';
+#$s1->set('sysLocation.0', $nonstrvalue);
+#$finalvalue = $s1->get('sysLocation.0');
+#ok(!defined($finalvalue));
+
+#if (($initialvalue cmp $finalvalue) != 0 ) {
+# ok(1);
+#}
+#print STDERR "Error string = $s1->{ErrorStr}:$s1->{ErrorInd}\n";
+#print("set value is: $finalvalue\n\n");
+#$s1->set('sysLocation.0', $originalLocation);
+
+####################### 4 #####################################
+
+# Test for an integer (READ-ONLY)
+$originalservice = $s1->get('sysServices.0');
+#print("services is: $originalservice\n");
+$junk_service = "Nortel Networks";
+$s1->set('sysServices.0', $junk_service);
+
+$finalvalue = $s1->get('sysServices.0');
+#print("services is: $finalvalue\n");
+#print("Services is: $originalservice\n");
+ok($originalservice eq $finalvalue);
+#print STDERR "Error string = $s1->{ErrorStr}:$s1->{ErrorInd}\n";
+$s1->set('sysServices.0',$originalservice);
+#print("\n");
+
+################## 5 ######################
+# Test for an integer (READ-WRITE)
+# The snmpEnableAuthenTraps takes only two values - 1 and 2.
+# If any other value is tried to be set, it doesn't set and
+# retains the old value.
+
+$originalTrap = $s1->get('snmpEnableAuthenTraps.0');
+#print("trap is -- $originalTrap\n");
+$junk_trap = "Nortel Networks";
+$s1->set('snmpEnableAuthenTraps.0', $junk_trap);
+$finalvalue = $s1->get('snmpEnableAuthenTraps.0');
+#print("final trap is: $finalvalue\n");
+ok($finalvalue ne $junk_trap);
+# Should the error be 'Value out of range: SNMPERR_RANGE ?
+#print STDERR "Error string = $s1->{ErrorStr}:$s1->{ErrorInd}\n";
+$s1->set('snmpEnableAuthenTraps.0',$originalTrap);
+#print("\n");
+################### 6 #######################
+# Test for a TimeTicks (is this advisable? )
+# Trying to set uptime which cannot be done (READ-ONLY).
+#$time = $s1->get('sysUpTime.0');
+#print("up time is : $time hundredths of a second\n");
+#$junk_time = 12345;
+#$s1->set('sysUpTime.0', $junk_time);
+#$finalvalue = $s1->get('sysUpTime.0');
+#print("final time is: $finalvalue hundredths of a second \n");
+# Will the final value always be equal to the initial value?
+# depends on how fast this piece of code executes?
+#ok($finalvalue == $time);
+#print STDERR "Error string = $s1->{ErrorStr}:$s1->{ErrorInd}\n";
+#print("\n");
+
+################### 7 ######################
+
+
+#Test for a Counter32 type.
+# READ-ONLY.
+
+#$Pkts = $s1->get('snmpInPkts.0');
+#print(" pkts is : $Pkts\n");
+#$junk_pkts = -1234;
+#$s1->set('snmpInPkts.0', $junk_pkts);
+#$finalPkts = $s1->get('snmpInPkts.0');
+#print("now pkts is : $finalPkts\n");
+#ok($finalPkts > $Pkts);
+# Expecting genErr
+#ok($s1->{ErrorStr} =~ /^\(gen/);
+#print STDERR "pkts is = $s1->{ErrorStr}:$s1->{ErrorInd}\n";
+#print("\n");
+################## 8 ##############################
+
+# Set a non-accessible attribute
+$s1->set('ipAddrEntry.1', 'MyEID');
+# What should I expect - genErr or Bad variable type ?
+# What gets checked first - type or accessibility?
+# if type, then this is right..else, genErr is expected.
+ok($s1->{ErrorStr} =~ /^Bad/ );
+#print STDERR "Error string = $s1->{ErrorStr}:$s1->{ErrorInd}\n";
+#print("\n");
+
+################# 12 ##########################
+# Time stamp test - READ-ONLY
+#$origtime = $s1->get('sysORLastChange.0');
+#print("Time is: $origtime\n");
+#print STDERR "Error string = $s1->{ErrorStr}:$s1->{ErrorInd}\n";
+#$time = $s1->set('sysORLastChange.0', 12345);
+#print("time stamp is : $time \n");
+# Should get genErr.
+#ok($time =~ /^genErr/);
+#print STDERR "Error string = $s1->{ErrorStr}:$s1->{ErrorInd}\n";
+#print("\n");
+
+############## 13 ############################
+
+# OID test
+my $oldoid = $s1->get("sysORID.1");
+#print("OID is : $oldoid\n");
+$junk_OID = ".6.6.6.6.6.6";
+$s1->set('sysORID.1', $junk_OID);
+$newOID = $s1->get("sysORID.1");
+#print("new oid is $newOID\n");
+ok($oldoid eq $newOID);
+#print STDERR "Error string = $s1->{ErrorStr}:$s1->{ErrorInd}\n";
+#print("\n");
+################ 14 ##########################
+
+# Try setting an unregistered OID.
+$junk_data = 'hehehe';
+$s1->set('ifmyData.0', $junk_data);
+
+#print STDERR "Error string = $s1->{ErrorStr}:$s1->{ErrorInd}\n";
+ok( $s1->{ErrorStr} =~ /^Unknown/ );
+
+##############################################
+
+snmptest_cleanup();
+
+
projects / bcm963xx.git / blobdiff