//! Setup analog chain for glitching.
void glitchsetupdac(){
-#ifdef DAC12IR
+ glitchvoltages(glitchL,glitchH);
+}
+
+
+u16 glitchH=0xfff, glitchL=0xfff,
+ glitchstate, glitchcount;
+
+//! Glitch an application.
+void glitchapp(u8 app){
+ debugstr("That app is not yet supported.");
+}
+//! Set glitching voltages.
+void glitchvoltages(u16 low, u16 high){
int i;
+ glitchH=high;
+ glitchL=low;
+
+
+ #ifdef DAC12IR
ADC12CTL0 = REF2_5V + REFON; // Internal 2.5V ref on
// Delay here for reference to settle.
for(i=0;i!=0xFFFF;i++) asm("nop");
DAC12_0CTL = DAC12IR + DAC12AMP_5 + DAC12ENC; // Int ref gain 1
// 1.0V 0x0666, 2.5V 0x0FFF
- DAC12_0DAT = 0x0FFF;
+ DAC12_0DAT = high;
//DAC12_0DAT = 0x0880;
- //__bis_SR_register(LPM0_bits + GIE); // Enter LPM0
-#endif
+ #endif
+}
+//! Set glitching rate.
+void glitchrate(u16 rate){
+ glitchcount=rate;
+}
+
+
+//! Handles a monitor command.
+void glitchhandle(unsigned char app,
+ unsigned char verb,
+ unsigned long len){
+ switch(verb){
+ case GLITCHVOLTAGES:
+ glitchvoltages(cmddataword[0],
+ cmddataword[1]);
+ txdata(app,verb,0);
+ break;
+ case GLITCHRATE:
+ glitchrate(cmddataword[0]);
+ txdata(app,verb,0);
+ break;
+ case START:
+ case STOP:
+ case GLITCHAPP:
+ case GLITCHVERB:
+ default:
+ debugstr("Unknown glitching verb.");
+ txdata(app,NOK,0);
+ }
}
#include <io.h>
#include <iomacros.h>
+//Command codes
+#define GLITCHAPP 0x80
+#define GLITCHVERB 0x81
+#define GLITCHVOLTAGES 0x90
+#define GLITCHRATE 0x91
+
//! Disable glitch state at init.
void glitchsetup();
//! Setup analog chain for glitching.
void glitchsetupdac();
+
+extern u16 glitchH, glitchL, glitchstate, glitchcount;
+
+//! Glitch an application.
+void glitchapp(u8 app);
+//! Set glitching voltages.
+void glitchvoltages(u16 low, u16 high);
+//! Set glitching rate.
+void glitchrate(u16 rate);
+
+//! Handles a monitor command.
+void glitchhandle(unsigned char app,
+ unsigned char verb,
+ unsigned long len);