--- /dev/null
+/dts-v1/;
+/plugin/;
+
+/ {
+ compatible = "allwinner,sun4i-a10", "allwinner,sun7i-a20", "allwinner,sun50i-a64", "allwinner,sun50i-h5";
+
+ /*
+ * This fragment is needed only for the internal pull-up activation,
+ * external pull-up resistor is highly recommended if using long wires
+ */
+ fragment@0 {
+ target = <&pio>;
+ __overlay__ {
+ gpio_button_0: gpio_button_0 {
+ pins = "PH3", "PH5";
+ function = "gpio_in";
+ bias-pull-up;
+ };
+ };
+ };
+
+ fragment@1 {
+ target-path = "/";
+ __overlay__ {
+ gpio-keys-user {
+ /*
+ * Use "gpio-keys" for EINT capable pins, "gpio-keys-polled" for other pins
+ * add "poll-interval" property if using "gpio-keys-polled"
+ */
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_button_0>;
+
+ up {
+ label = "button-up";
+ linux,code = <103>; /* KEY_UP, see include/uapi/linux/input-event-codes.h */
+ gpios = <&pio 7 3 1>; /* PH3 GPIO_ACTIVE_LOW */
+ };
+
+ down {
+ label = "button-down";
+ linux,code = <108>; /* KEY_DOWN, see include/uapi/linux/input-event-codes.h */
+ gpios = <&pio 7 5 1>; /* PH5 GPIO_ACTIVE_LOW */
+ };
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * add few leds
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ compatible = "allwinner,sun4i-a10", "allwinner,sun7i-a20", "allwinner,sun50i-a64", "allwinner,sun50i-h5";
+
+ /* Documentation/devicetree/bindings/leds/leds-gpio.txt */
+ fragment@0 {
+ target-path = "/";
+
+ __overlay__ {
+ user-leds {
+ compatible = "gpio-leds";
+
+ leds@0 {
+ label = "gpio:red-top";
+ gpios = <&pio 8 20 0>; /* PI20 GPIO_ACTIVE_HIGH */
+ linux,default-trigger = "mmc0";
+ };
+
+ leds@1 {
+ label = "gpio:green-bottom";
+ gpios = <&pio 8 21 0>; /* PI21 GPIO_ACTIVE_HIGH */
+ linux,default-trigger = "cpu";
+ };
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+/plugin/;
+
+/ {
+ compatible = "allwinner,sun4i-a10", "allwinner,sun7i-a20", "allwinner,sun50i-a64", "allwinner,sun50i-h5";
+
+ fragment@0 {
+ target = <&i2c2>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ tmp75@49 {
+ compatible = "ti,tmp75";
+ reg = <0x49>;
+ status = "okay";
+ };
+ };
+ };
+};