ahci: move port_map handling to ahci_save_initial_config()
authorTejun Heo <htejun@gmail.com>
Sun, 18 Mar 2007 13:26:53 +0000 (22:26 +0900)
committerJeff Garzik <jeff@garzik.org>
Sat, 28 Apr 2007 18:16:01 +0000 (14:16 -0400)
Move cross checking between port_map and cap.n_ports into
ahci_save_initial_config().  After save_initial_config is done,
hpriv->port_map is always setup properly.

Tested on JMB363, ICH7 and ICH8 (with dummy ports).

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/ata/ahci.c

index c31b663..fb9f692 100644 (file)
@@ -498,6 +498,7 @@ static void ahci_save_initial_config(struct ata_probe_ent *probe_ent)
        struct ahci_host_priv *hpriv = probe_ent->private_data;
        void __iomem *mmio = probe_ent->iomap[AHCI_PCI_BAR];
        u32 cap, port_map;
+       int i;
 
        /* Values prefixed with saved_ are written back to host after
         * reset.  Values without are used for driver operation.
@@ -515,6 +516,31 @@ static void ahci_save_initial_config(struct ata_probe_ent *probe_ent)
                hpriv->saved_port_map = port_map;
        }
 
+       /* cross check port_map and cap.n_ports */
+       if (probe_ent->port_flags & AHCI_FLAG_HONOR_PI) {
+               u32 tmp_port_map = port_map;
+               int n_ports = ahci_nr_ports(cap);
+
+               for (i = 0; i < AHCI_MAX_PORTS && n_ports; i++) {
+                       if (tmp_port_map & (1 << i)) {
+                               n_ports--;
+                               tmp_port_map &= ~(1 << i);
+                       }
+               }
+
+               /* Whine if inconsistent.  No need to update cap.
+                * port_map is used to determine number of ports.
+                */
+               if (n_ports || tmp_port_map)
+                       dev_printk(KERN_WARNING, probe_ent->dev,
+                                  "nr_ports (%u) and implemented port map "
+                                  "(0x%x) don't match\n",
+                                  ahci_nr_ports(cap), port_map);
+       } else {
+               /* fabricate port_map from cap.nr_ports */
+               port_map = (1 << ahci_nr_ports(cap)) - 1;
+       }
+
        /* record values to use during operation */
        hpriv->cap = cap;
        hpriv->port_map = port_map;
@@ -1589,41 +1615,18 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
        struct ahci_host_priv *hpriv = probe_ent->private_data;
        struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
        void __iomem *mmio = probe_ent->iomap[AHCI_PCI_BAR];
-       unsigned int i, cap_n_ports, using_dac;
+       unsigned int i, using_dac;
        int rc;
 
        rc = ahci_reset_controller(mmio, pdev, hpriv);
        if (rc)
                return rc;
 
-       cap_n_ports = ahci_nr_ports(hpriv->cap);
+       probe_ent->n_ports = fls(hpriv->port_map);
+       probe_ent->dummy_port_mask = ~hpriv->port_map;
 
        VPRINTK("cap 0x%x  port_map 0x%x  n_ports %d\n",
-               hpriv->cap, hpriv->port_map, cap_n_ports);
-
-       if (probe_ent->port_flags & AHCI_FLAG_HONOR_PI) {
-               unsigned int n_ports = cap_n_ports;
-               u32 port_map = hpriv->port_map;
-               int max_port = 0;
-
-               for (i = 0; i < AHCI_MAX_PORTS && n_ports; i++) {
-                       if (port_map & (1 << i)) {
-                               n_ports--;
-                               port_map &= ~(1 << i);
-                               max_port = i;
-                       } else
-                               probe_ent->dummy_port_mask |= 1 << i;
-               }
-
-               if (n_ports || port_map)
-                       dev_printk(KERN_WARNING, &pdev->dev,
-                                  "nr_ports (%u) and implemented port map "
-                                  "(0x%x) don't match\n",
-                                  cap_n_ports, hpriv->port_map);
-
-               probe_ent->n_ports = max_port + 1;
-       } else
-               probe_ent->n_ports = cap_n_ports;
+               hpriv->cap, hpriv->port_map, probe_ent->n_ports);
 
        using_dac = hpriv->cap & HOST_CAP_64;
        if (using_dac &&