libata: improve ata_down_xfermask_limit()

Make ata_down_xfermask_limit() accept @sel instead of @force_pio0.
@sel selects how the xfermask limit will be adjusted.  The following
selectors are defined.

* ATA_DNXFER_PIO	: only speed down PIO
* ATA_DNXFER_DMA	: only speed down DMA, don't cause transfer mode change
* ATA_DNXFER_40C	: apply 40c cable limit
* ATA_DNXFER_FORCE_PIO	: force PIO
* ATA_DNXFER_FORCE_PIO0	: force PIO0 (same as original with @force_pio0 == 1)
* ATA_DNXFER_ANY	: same as original with @force_pio0 == 0

Currently, only ANY and FORCE_PIO0 are used to maintain the original
behavior.  Other selectors will be used later to improve EH speed down
sequence.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9c54de5..249d487 100644 (file)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1780,6 +1780,7 @@ int ata_bus_probe(struct ata_port *ap)
        int tries[ATA_MAX_DEVICES];
        int i, rc, down_xfermask;
        struct ata_device *dev;
+       int dnxfer_sel;
 
        ata_port_probe(ap);
 
@@ -1861,13 +1862,15 @@ int ata_bus_probe(struct ata_port *ap)
                /* fall through */
        default:
                tries[dev->devno]--;
-               if (down_xfermask &&
-                   ata_down_xfermask_limit(dev, tries[dev->devno] == 1))
+               dnxfer_sel = ATA_DNXFER_ANY;
+               if (tries[dev->devno] == 1)
+                       dnxfer_sel = ATA_DNXFER_FORCE_PIO0;
+               if (down_xfermask && ata_down_xfermask_limit(dev, dnxfer_sel))
                        tries[dev->devno] = 0;
        }
 
        if (!tries[dev->devno]) {
-               ata_down_xfermask_limit(dev, 1);
+               ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0);
                ata_dev_disable(dev);
        }
 
@@ -2300,7 +2303,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
 /**
  *     ata_down_xfermask_limit - adjust dev xfer masks downward
  *     @dev: Device to adjust xfer masks
- *     @force_pio0: Force PIO0
+ *     @sel: ATA_DNXFER_* selector
  *
  *     Adjust xfer masks of @dev downward.  Note that this function
  *     does not apply the change.  Invoking ata_set_mode() afterwards
@@ -2312,37 +2315,87 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
  *     RETURNS:
  *     0 on success, negative errno on failure
  */
-int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0)
+int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel)
 {
-       unsigned long xfer_mask;
-       int highbit;
+       char buf[32];
+       unsigned int orig_mask, xfer_mask;
+       unsigned int pio_mask, mwdma_mask, udma_mask;
+       int quiet, highbit;
 
-       xfer_mask = ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask,
-                                     dev->udma_mask);
+       quiet = !!(sel & ATA_DNXFER_QUIET);
+       sel &= ~ATA_DNXFER_QUIET;
 
-       if (!xfer_mask)
-               goto fail;
-       /* don't gear down to MWDMA from UDMA, go directly to PIO */
-       if (xfer_mask & ATA_MASK_UDMA)
-               xfer_mask &= ~ATA_MASK_MWDMA;
+       xfer_mask = orig_mask = ata_pack_xfermask(dev->pio_mask,
+                                                 dev->mwdma_mask,
+                                                 dev->udma_mask);
+       ata_unpack_xfermask(xfer_mask, &pio_mask, &mwdma_mask, &udma_mask);
 
-       highbit = fls(xfer_mask) - 1;
-       xfer_mask &= ~(1 << highbit);
-       if (force_pio0)
-               xfer_mask &= 1 << ATA_SHIFT_PIO;
-       if (!xfer_mask)
-               goto fail;
+       switch (sel) {
+       case ATA_DNXFER_PIO:
+               highbit = fls(pio_mask) - 1;
+               pio_mask &= ~(1 << highbit);
+               break;
+
+       case ATA_DNXFER_DMA:
+               if (udma_mask) {
+                       highbit = fls(udma_mask) - 1;
+                       udma_mask &= ~(1 << highbit);
+                       if (!udma_mask)
+                               return -ENOENT;
+               } else if (mwdma_mask) {
+                       highbit = fls(mwdma_mask) - 1;
+                       mwdma_mask &= ~(1 << highbit);
+                       if (!mwdma_mask)
+                               return -ENOENT;
+               }
+               break;
+
+       case ATA_DNXFER_40C:
+               udma_mask &= ATA_UDMA_MASK_40C;
+               break;
+
+       case ATA_DNXFER_FORCE_PIO0:
+               pio_mask &= 1;
+       case ATA_DNXFER_FORCE_PIO:
+               mwdma_mask = 0;
+               udma_mask = 0;
+               break;
+
+       case ATA_DNXFER_ANY:
+               /* don't gear down to MWDMA from UDMA, go directly to PIO */
+               if (xfer_mask & ATA_MASK_UDMA)
+                       xfer_mask &= ~ATA_MASK_MWDMA;
+
+               highbit = fls(xfer_mask) - 1;
+               xfer_mask &= ~(1 << highbit);
+               break;
+
+       default:
+               BUG();
+       }
+
+       xfer_mask &= ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
+
+       if (!(xfer_mask & ATA_MASK_PIO) || xfer_mask == orig_mask)
+               return -ENOENT;
+
+       if (!quiet) {
+               if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA))
+                       snprintf(buf, sizeof(buf), "%s:%s",
+                                ata_mode_string(xfer_mask),
+                                ata_mode_string(xfer_mask & ATA_MASK_PIO));
+               else
+                       snprintf(buf, sizeof(buf), "%s",
+                                ata_mode_string(xfer_mask));
+
+               ata_dev_printk(dev, KERN_WARNING,
+                              "limiting speed to %s\n", buf);
+       }
 
        ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
                            &dev->udma_mask);
 
-       ata_dev_printk(dev, KERN_WARNING, "limiting speed to %s\n",
-                      ata_mode_string(xfer_mask));
-
        return 0;
-
- fail:
-       return -EINVAL;
 }
 
 static int ata_dev_set_mode(struct ata_device *dev)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 52c85af..7b61562 100644 (file)
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1276,7 +1276,7 @@ static int ata_eh_speed_down(struct ata_device *dev, int is_io,
                return ATA_EH_HARDRESET;
 
        /* lower transfer mode */
-       if (ata_down_xfermask_limit(dev, 0) == 0)
+       if (ata_down_xfermask_limit(dev, ATA_DNXFER_ANY) == 0)
                return ATA_EH_SOFTRESET;
 
        ata_dev_printk(dev, KERN_ERR,
@@ -1965,6 +1965,7 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
        struct ata_eh_context *ehc = &ap->eh_context;
        struct ata_device *dev;
        int down_xfermask, i, rc;
+       int dnxfer_sel;
 
        DPRINTK("ENTER\n");
 
@@ -2064,8 +2065,10 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
                sata_down_spd_limit(ap);
        default:
                ehc->tries[dev->devno]--;
-               if (down_xfermask &&
-                   ata_down_xfermask_limit(dev, ehc->tries[dev->devno] == 1))
+               dnxfer_sel = ATA_DNXFER_ANY;
+               if (ehc->tries[dev->devno] == 1)
+                       dnxfer_sel = ATA_DNXFER_FORCE_PIO0;
+               if (down_xfermask && ata_down_xfermask_limit(dev, dnxfer_sel))
                        ehc->tries[dev->devno] = 0;
        }
 

diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 0ad7781..8533de6 100644 (file)
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -41,6 +41,16 @@ struct ata_scsi_args {
 enum {
        /* flags for ata_dev_read_id() */
        ATA_READID_POSTRESET    = (1 << 0), /* reading ID after reset */
+
+       /* selector for ata_down_xfermask_limit() */
+       ATA_DNXFER_PIO          = 0,    /* speed down PIO */
+       ATA_DNXFER_DMA          = 1,    /* speed down DMA */
+       ATA_DNXFER_40C          = 2,    /* apply 40c cable limit */
+       ATA_DNXFER_FORCE_PIO    = 3,    /* force PIO */
+       ATA_DNXFER_FORCE_PIO0   = 4,    /* force PIO0 */
+       ATA_DNXFER_ANY          = 5,    /* speed down any */
+
+       ATA_DNXFER_QUIET        = (1 << 31),
 };
 
 extern struct workqueue_struct *ata_aux_wq;
@@ -69,7 +79,7 @@ extern int ata_dev_revalidate(struct ata_device *dev, unsigned int flags);
 extern int ata_dev_configure(struct ata_device *dev);
 extern int sata_down_spd_limit(struct ata_port *ap);
 extern int sata_set_spd_needed(struct ata_port *ap);
-extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0);
+extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
 extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
 extern void ata_sg_clean(struct ata_queued_cmd *qc);
 extern void ata_qc_free(struct ata_queued_cmd *qc);