[WATCHDOG] pcwd.c Control Status #2 patch

Add Control Status #2 bits (with defines)

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

diff --git a/drivers/char/watchdog/pcwd.c b/drivers/char/watchdog/pcwd.c
index 1112ec8..0635cd7 100644 (file)
--- a/drivers/char/watchdog/pcwd.c
+++ b/drivers/char/watchdog/pcwd.c
@@ -87,22 +87,24 @@
 #define        PCWD_REVISION_C         2
 
 /*
- * These are the defines that describe the control status #1 bits for the
- * PC Watchdog card, revision A.
- */
+ * These are the defines that describe the control status bits for the
+ * PCI-PC Watchdog card.
+*/
+/* Port 1 : Control Status #1 for the PC Watchdog card, revision A. */
 #define WD_WDRST                0x01   /* Previously reset state */
 #define WD_T110                 0x02   /* Temperature overheat sense */
 #define WD_HRTBT                0x04   /* Heartbeat sense */
 #define WD_RLY2                 0x08   /* External relay triggered */
 #define WD_SRLY2                0x80   /* Software external relay triggered */
-
-/*
- * These are the defines that describe the control status #1 bits for the
- * PC Watchdog card, revision C.
- */
+/* Port 1 : Control Status #1 for the PC Watchdog card, revision C. */
 #define WD_REVC_WTRP            0x01   /* Watchdog Trip status */
 #define WD_REVC_HRBT            0x02   /* Watchdog Heartbeat */
 #define WD_REVC_TTRP            0x04   /* Temperature Trip status */
+/* Port 2 : Control Status #2 */
+#define WD_WDIS                        0x10    /* Watchdog Disabled */
+#define WD_ENTP                        0x20    /* Watchdog Enable Temperature Trip */
+#define WD_SSEL                        0x40    /* Watchdog Switch Select (1:SW1 <-> 0:SW2) */
+#define WD_WCMD                        0x80    /* Watchdog Command Mode */
 
 /* max. time we give an ISA watchdog card to process a command */
 /* 500ms for each 4 bit response (according to spec.) */
@@ -166,7 +168,7 @@ static int send_isa_command(int cmd)
        int port0, last_port0;  /* Double read for stabilising */
 
        /* The WCMD bit must be 1 and the command is only 4 bits in size */
-       control_status = (cmd & 0x0F) | 0x80;
+       control_status = (cmd & 0x0F) | WD_WCMD;
        outb_p(control_status, pcwd_private.io_addr + 2);
        udelay(ISA_COMMAND_TIMEOUT);
 
@@ -267,7 +269,7 @@ static int pcwd_start(void)
                udelay(ISA_COMMAND_TIMEOUT);
                stat_reg = inb_p(pcwd_private.io_addr + 2);
                spin_unlock(&pcwd_private.io_lock);
-               if (stat_reg & 0x10) {
+               if (stat_reg & WD_WDIS) {
                        printk(KERN_INFO PFX "Could not start watchdog\n");
                        return -EIO;
                }
@@ -291,7 +293,7 @@ static int pcwd_stop(void)
                udelay(ISA_COMMAND_TIMEOUT);
                stat_reg = inb_p(pcwd_private.io_addr + 2);
                spin_unlock(&pcwd_private.io_lock);
-               if ((stat_reg & 0x10) == 0) {
+               if ((stat_reg & WD_WDIS) == 0) {
                        printk(KERN_INFO PFX "Could not stop watchdog\n");
                        return -EIO;
                }