pata_jmicron: drop unnecessary device programming in [re]init

Channel redirect and AHCI mode enable programmings are done via PCI
quirk for both probe and resume paths.  Drop duplicate and possibly
unsafe device programming from pata_jmicron().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 7a635dd..c40d092 100644 (file)
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -202,43 +202,13 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
        };
        struct ata_port_info *port_info[2] = { &info, &info };
 
-       u32 reg;
-
        /* PATA controller is fn 1, AHCI is fn 0 */
        if (id->driver_data != 368 && PCI_FUNC(pdev->devfn) != 1)
                return -ENODEV;
 
-       /* The 365/66 have two PATA channels, redirect the second */
-       if (id->driver_data == 365 || id->driver_data == 366) {
-               pci_read_config_dword(pdev, 0x80, &reg);
-               reg |= (1 << 24);       /* IDE1 to PATA IDE secondary */
-               pci_write_config_dword(pdev, 0x80, reg);
-       }
-
        return ata_pci_init_one(pdev, port_info, 2);
 }
 
-static int jmicron_reinit_one(struct pci_dev *pdev)
-{
-       u32 reg;
-
-       switch(pdev->device) {
-               case PCI_DEVICE_ID_JMICRON_JMB368:
-                       break;
-               case PCI_DEVICE_ID_JMICRON_JMB365:
-               case PCI_DEVICE_ID_JMICRON_JMB366:
-                       /* Restore mapping or disks swap and boy does it get ugly */
-                       pci_read_config_dword(pdev, 0x80, &reg);
-                       reg |= (1 << 24);       /* IDE1 to PATA IDE secondary */
-                       pci_write_config_dword(pdev, 0x80, reg);
-                       /* Fall through */
-               default:
-                       /* Make sure AHCI is turned back on */
-                       pci_write_config_byte(pdev, 0x41, 0xa1);
-       }
-       return ata_pci_device_resume(pdev);
-}
-
 static const struct pci_device_id jmicron_pci_tbl[] = {
        { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB361), 361},
        { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB363), 363},
@@ -255,7 +225,7 @@ static struct pci_driver jmicron_pci_driver = {
        .probe                  = jmicron_init_one,
        .remove                 = ata_pci_remove_one,
        .suspend                = ata_pci_device_suspend,
-       .resume                 = jmicron_reinit_one,
+       .resume                 = ata_pci_device_resume,
 };
 
 static int __init jmicron_init(void)