--- /dev/null
+#!/bin/sh
+# configversion: ef09861c083e9642d0dffc2e436e307a
+# SPDX-License-Identifier: AGPL-3.0-only
+# Copyright 2022 Sxmo Contributors
+
+# we disable shellcheck SC2154 (unreferenced variable used)
+# shellcheck disable=SC2154
+
+# include common definitions
+# shellcheck source=configs/default_hooks/sxmo_hook_icons.sh
+. sxmo_hook_icons.sh
+# shellcheck source=scripts/core/sxmo_common.sh
+. sxmo_common.sh
+
+# You can modify the statusbar ordering and feel here.
+# Note that order number runs from 0 (far left) to 100 (far
+# right). Our preference is to have "static" icons on the
+# right and "variable" icons (that come and go) on the left.
+
+set_time() {
+ date "+${SXMO_STATUS_DATE_FORMAT:-%H:%M}" | while read -r date; do
+ sxmobar -a time 99 "$date"
+ done
+}
+
+set_state() {
+ if [ ! -f "$SXMO_STATE" ]; then
+ return
+ fi
+
+ STATE_LABEL="$(cat "$SXMO_STATE")"
+ case "$STATE_LABEL" in
+ proximity*)
+ sxmobar -a -e bold -f orange state 90 "$icon_state_proximity" # circle with dot
+ ;;
+ screenoff)
+ sxmobar -a -e bold -f red state 90 "$icon_state_screenoff" # filled circle
+ ;;
+ lock)
+ sxmobar -a -e bold -f red state 90 "$icon_state_lock" # open circle with slash
+ ;;
+ unlock)
+ sxmobar -a -e bold state 90 "$icon_state_unlock" # open circle
+ ;;
+ esac
+}
+
+# from right to left: indicate signal, technologies, mm state
+set_modem() {
+ MMCLI="$(mmcli -m any -J 2>/dev/null)"
+
+ bgcolor=default
+ fgcolor=default
+ style=normal
+
+ if [ -z "$MMCLI" ]; then
+ MODEMSTATE="nomodem"
+ else
+ MODEMSTATE="$(printf %s "$MMCLI" | jq -r .modem.generic.state)"
+ fi
+
+ case "$MODEMSTATE" in
+ nomodem)
+ fgcolor=red
+ MODEMSTATECMP="$icon_modem_nomodem"
+ ;;
+ locked)
+ fgcolor=red
+ MODEMSTATECMP="$icon_modem_locked"
+ ;;
+ initializing)
+ fgcolor=red
+ MODEMSTATECMP="$icon_modem_initializing"
+ ;;
+ disabled) # low power state
+ fgcolor=red
+ MODEMSTATECMP="$icon_modem_disabled"
+ ;;
+ disabling)
+ fgcolor=red
+ MODEMSTATECMP="$icon_modem_disabling"
+ ;;
+ enabling) # modem enabled but neither registered (cell) nor connected (data)
+ fgcolor=red
+ MODEMSTATECMP="$icon_modem_enabling"
+ ;;
+ enabled)
+ fgcolor=red
+ MODEMSTATECMP="$icon_modem_enabled"
+ ;;
+ searching) # i.e. registering
+ fgcolor=red
+ MODEMSTATECMP="$icon_modem_searching"
+ ;;
+ registered) # i.e. phone but no data
+ fgcolor=orange
+ MODEMSTATECMP="$icon_modem_registered"
+ ;;
+ connecting)
+ fgcolor=orange
+ MODEMSTATECMP="$icon_modem_connecting"
+ ;;
+ disconnecting) # i.e., going back to registered state
+ fgcolor=orange
+ MODEMSTATECMP="$icon_modem_disconnecting"
+ ;;
+ connected)
+ MODEMSTATECMP="$icon_modem_connected"
+ ;;
+ *)
+ # FAILED, UNKNOWN
+ # see https://www.freedesktop.org/software/ModemManager/doc/latest/ModemManager/ModemManager-Flags-and-Enumerations.html#MMModemState
+ fgcolor=red
+ MODEMSTATECMP="$icon_modem_failed" # cell with !
+ sxmo_log "WARNING: MODEMSTATE: $MODEMSTATE"
+ ;;
+ esac
+
+ sxmobar -a -f "$fgcolor" -b "$bgcolor" -t "$style" \
+ modem-state 10 "$MODEMSTATECMP"
+
+ if [ "$MODEMSTATE" = nomodem ]; then
+ sxmobar -d modem-tech
+ sxmobar -d modem-signal
+ return
+ fi
+
+ MODEMTECHCMP="$icon_modem_notech"
+ bgcolor=default
+ fgcolor=default
+ style=normal
+
+ # see https://www.freedesktop.org/software/ModemManager/api/latest/ModemManager-Flags-and-Enumerations.html#MMModemAccessTechnology
+ USEDTECHS="$(printf %s "$MMCLI" | jq -r '.modem.generic."access-technologies"[]')"
+ case "$USEDTECHS" in
+ *5gnr*)
+ MODEMTECHCMP="$icon_modem_fiveg"
+ ;;
+ *lte*) # lte, lte_nb_iot, lte_cat_m
+ MODEMTECHCMP="$icon_modem_fourg"
+ ;;
+ *umts*)
+ MODEMTECHCMP="$icon_modem_threeg"
+ ;;
+ *hsupa*)
+ MODEMTECHCMP="$USEDTECHS" # 3g
+ ;;
+ *hsdpa*)
+ MODEMTECHCMP="$USEDTECHS" # 3g
+ ;;
+ *1xrtt*)
+ MODEMTECHCMP="$USEDTECHS" # 3g
+ ;;
+ *evdo*) # evdo0, evdoa, evdob
+ MODEMTECHCMP="$USEDTECHS" # 3g
+ ;;
+ *hspa_plus*)
+ MODEMTECHCMP="$icon_modem_hspa_plus" # 3g
+ ;;
+ *hspa*)
+ MODEMTECHCMP="$icon_modem_hspa" # 3g
+ ;;
+ *edge*)
+ MODEMTECHCMP="E" # 2G+
+ ;;
+ *pots*)
+ MODEMTECHCMP="P" # 0G
+ ;;
+ *gsm*) # gsm, gsm_compact
+ MODEMTECHCMP="$icon_modem_twog"
+ ;;
+ *gprs*)
+ MODEMTECHCMP="G" # 2G
+ ;;
+ *)
+ sxmo_log "WARNING: USEDTECHS: $USEDTECHS"
+ fgcolor=red
+ ;;
+ esac
+
+ sxmobar -a -f "$fgcolor" -b "$bgcolor" -t "$style" \
+ modem-tech 11 "$MODEMTECHCMP"
+
+ MODEMSIGNALCMP="$icon_modem_signal_0"
+ bgcolor=default
+ fgcolor=default
+ style=normal
+
+ case "$MODEMSTATE" in
+ registered|connected|connecting|disconnecting)
+ MODEMSIGNAL="$(printf %s "$MMCLI" | jq -r '.modem.generic."signal-quality".value')"
+ if [ "$MODEMSIGNAL" -lt 33 ]; then
+ MODEMSIGNALCMP="$icon_modem_signal_1"
+ elif [ "$MODEMSIGNAL" -lt 66 ]; then
+ MODEMSIGNALCMP="$icon_modem_signal_2"
+ else
+ MODEMSIGNALCMP="$icon_modem_signal_3"
+ fi
+ ;;
+ esac
+
+ sxmobar -a -f "$fgcolor" -b "$bgcolor" -t "$style" \
+ modem-signal 12 "$MODEMSIGNALCMP"
+}
+
+# $1 = type (wifi, tun)
+# $2 = interface name (wlan0, tun0)
+set_wifi() {
+
+ if rfkill list wifi | grep -q "yes"; then
+ sxmobar -d wifi-status
+ return
+ fi
+
+ CONN="$(nmcli -t con show --active)"
+
+ if ! printf %b "$CONN" | cut -d':' -f3 | grep -q wireless; then
+ sxmobar -a -f red wifi-status 30 "$icon_wifi_disconnected"
+ return
+ fi
+
+ # we simply assume Hotspot as first bit of name
+ # for hotspot as this is what we create.
+ if printf %b "$CONN" | grep -q ^Hotspot; then
+ sxmobar -a wifi-status 30 "$icon_wfh"
+ return
+ fi
+
+ # if they have a vpn nmcli c shown --active should also list:
+ # tun0 ef5fcce9-fdae-4ffe-a540-b16fc7b42852 tun tun0
+ if printf %b "$CONN" | cut -d':' -f3 | grep -q ^tun$; then
+ wifivpn=1
+ else
+ wifivpn=0
+ fi
+
+ wifi_signal="$(nmcli -f IN-USE,SIGNAL,SSID device wifi | awk '/^\*/{if (NR!=1) {print $2}}')"
+ if [ -z "$wifi_signal" ]; then
+ icon_wif="$icon_wifi_signal_exclam"
+ elif [ "$wifi_signal" -lt 20 ]; then
+ if [ "$wifivpn" -eq 1 ]; then
+ icon_wif="$icon_wifi_key_signal_0"
+ else
+ icon_wif="$icon_wifi_signal_0"
+ fi
+ elif [ "$wifi_signal" -lt 40 ]; then
+ if [ "$wifivpn" -eq 1 ]; then
+ icon_wif="$icon_wifi_key_signal_1"
+ else
+ icon_wif="$icon_wifi_signal_1"
+ fi
+ elif [ "$wifi_signal" -lt 60 ]; then
+ if [ "$wifivpn" -eq 1 ]; then
+ icon_wif="$icon_wifi_key_signal_2"
+ else
+ icon_wif="$icon_wifi_signal_2"
+ fi
+ elif [ "$wifi_signal" -lt 80 ]; then
+ if [ "$wifivpn" -eq 1 ]; then
+ icon_wif="$icon_wifi_key_signal_3"
+ else
+ icon_wif="$icon_wifi_signal_3"
+ fi
+ else
+ if [ "$wifivpn" -eq 1 ]; then
+ icon_wif="$icon_wifi_key_signal_4"
+ else
+ icon_wif="$icon_wifi_signal_4"
+ fi
+ fi
+
+ sxmobar -a wifi-status 30 "$icon_wif"
+}
+
+# $1: type (reported by nmcli, e.g., wifi, tun)
+# $2: interface name (reported by nmcli, e.g., wlan0, tun0)
+set_network() {
+ case "$1" in
+ wifi|tun) set_wifi "$@" ;;
+ esac
+}
+
+set_battery() {
+ count=0 # handle multiple batteries
+ for power_supply in /sys/class/power_supply/*; do
+ fgcolor=default
+ bgcolor=default
+ style=normal
+ BATCMP=
+
+
+ if [ "$(cat "$power_supply"/type)" = "Battery" ]; then
+ if [ -e "$power_supply"/capacity ]; then
+ PCT="$(cat "$power_supply"/capacity)"
+ elif [ -e "$power_supply"/charge_now ]; then
+ CHARGE_NOW="$(cat "$power_supply"/charge_now)"
+ CHARGE_FULL="$(cat "$power_supply"/charge_full_design)"
+ PCT="$(printf "scale=2; %s / %s * 100\n" "$CHARGE_NOW" "$CHARGE_FULL" | bc | cut -d'.' -f1)"
+ else
+ continue
+ fi
+
+ count=$((count+1))
+
+ if [ -e "$power_supply"/status ]; then
+ # The status is not always given for the battery device.
+ # (sometimes it's linked to the charger device).
+ BATSTATUS="$(cut -c1 "$power_supply"/status)"
+ fi
+
+ # fixes a bug with keyboard case where
+ # /sys/class/power_supply/ip5xxx-charger/capacity
+ # exists but returns 'Not a tty'
+ if [ -z "$PCT" ]; then
+ BATCMP="ERR"
+ elif [ "$BATSTATUS" = "C" ] || [ "$BATSTATUS" = "F" ]; then
+ if [ "$PCT" -lt 25 ]; then
+ BATCMP="$icon_bat_c_0"
+ elif [ "$PCT" -lt 50 ]; then
+ BATCMP="$icon_bat_c_1"
+ elif [ "$PCT" -lt 75 ]; then
+ BATCMP="$icon_bat_c_2"
+ else
+ # Treat 'Full' status as same as 'Charging'
+ BATCMP="$icon_bat_c_3"
+ fi
+ else
+ if [ "$PCT" -lt 25 ]; then
+ fgcolor=red
+ if [ "$PCT" -lt 5 ]; then
+ BATCMP="$icon_bat_0"
+ elif [ "$PCT" -lt 10 ]; then
+ BATCMP="$icon_bat_1"
+ elif [ "$PCT" -lt 15 ]; then
+ BATCMP="$icon_bat_2"
+ else
+ BATCMP="$icon_bat_3"
+ fi
+ elif [ "$PCT" -lt 50 ]; then
+ fgcolor=orange
+ BATCMP="$icon_bat_1"
+ elif [ "$PCT" -lt 75 ]; then
+ BATCMP="$icon_bat_2"
+ else
+ BATCMP="$icon_bat_3"
+ fi
+ fi
+
+ sxmobar -a -t "$style" -b "$bgcolor" -f "$fgcolor" \
+ battery-icon 40 "$BATCMP"
+
+ if [ -z "$SXMO_BAR_SHOW_BAT_PER" ]; then
+ sxmobar -d battery-status
+ else
+ sxmobar -a battery-status 41 "$PCT%"
+ fi
+ fi
+ done
+}
+
+set_notifications() {
+ [ -z "$SXMO_DISABLE_LEDS" ] && return
+ NNOTIFICATIONS="$(find "$SXMO_NOTIFDIR" -type f | wc -l)"
+ if [ "$NNOTIFICATIONS" = 0 ]; then
+ sxmobar -d notifs
+ else
+ sxmobar -a -f red notifs 5 "!: $NNOTIFICATIONS"
+ fi
+}
+
+set_volume() {
+ VOLCMP=""
+
+ if sxmo_modemaudio.sh is_call_audio_mode; then
+ if sxmo_modemaudio.sh is_muted_mic; then
+ VOLCMP="$icon_mmc"
+ else
+ VOLCMP="$icon_mic"
+ fi
+ if sxmo_modemaudio.sh is_enabled_speaker; then
+ VOLCMP="$VOLCMP $icon_spk"
+ else
+ VOLCMP="$VOLCMP $icon_ear"
+ fi
+ sxmobar -a -f green volume 50 "$VOLCMP"
+ return;
+ fi
+
+ if sxmo_audio.sh mic ismuted; then
+ VOLCMP="$icon_mmc"
+ else
+ VOLCMP="$icon_mic"
+ fi
+
+ case "$(sxmo_audio.sh device get 2>/dev/null)" in
+ Speaker|"")
+ # nothing for default or pulse devices
+ ;;
+ Headphones|Headphone)
+ VOLCMP="$VOLCMP $icon_hdp"
+ ;;
+ Earpiece)
+ VOLCMP="$VOLCMP $icon_ear"
+ ;;
+ esac
+
+ VOL="$(sxmo_audio.sh vol get)"
+ if [ -z "$VOL" ] || [ "$VOL" = "muted" ]; then
+ VOLCMP="$VOLCMP $icon_mut"
+ elif [ "$VOL" -gt 66 ]; then
+ VOLCMP="$VOLCMP $icon_spk"
+ elif [ "$VOL" -gt 33 ]; then
+ VOLCMP="$VOLCMP $icon_spm"
+ elif [ "$VOL" -ge 0 ]; then
+ VOLCMP="$VOLCMP $icon_spl"
+ fi
+
+ sxmobar -a volume 50 "$VOLCMP"
+}
+
+sxmo_debug "$@"
+case "$1" in
+ network)
+ shift
+ set_network "$@"
+ ;;
+ time|modem|battery|volume|state|notifications)
+ set_"$1"
+ ;;
+ periodics|state_change) # 55 s loop and screenlock triggers
+ set_time
+ set_modem
+ set_battery
+ set_state
+ set_network wifi wlan0
+ ;;
+ all)
+ sxmobar -r
+ set_time
+ set_modem
+ set_battery
+ set_volume
+ set_state
+ set_notifications
+ set_network wifi wlan0
+ ;;
+ *)
+ exit # swallow it !
+ ;;
+esac
+
projects / sxmo-sms-ssh / commitdiff