# $dfPath path to df ($Conf{DfPath})
# $topDir top-level BackupPC data directory
#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
$Conf{DfCmd} = '$dfPath $topDir';
#
# . ' $serverInitdPath start'
# . ' < /dev/null >& /dev/null';
#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
$Conf{ServerInitdPath} = '';
$Conf{ServerInitdStartCmd} = '';
# $X_option exclude option (if $fileList is an exclude list)
# $timeStampFile start time for incremental dump
#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
$Conf{SmbClientFullCmd} = '$smbClientPath \\\\$host\\$shareName'
. ' $I_option -U $userName -E -N -d 1'
. ' -c tarmode\\ full -Tc$X_option - $fileList';
#
# Same variable substitutions are applied as $Conf{SmbClientFullCmd}.
#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
$Conf{SmbClientIncrCmd} = '$smbClientPath \\\\$host\\$shareName'
. ' $I_option -U $userName -E -N -d 1'
. ' -c tarmode\\ full -TcN$X_option $timeStampFile - $fileList';
# You should set $Conf{SmbClientRestoreCmd} to undef and the
# corresponding CGI restore option will be removed.
#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
$Conf{SmbClientRestoreCmd} = '$smbClientPath \\\\$host\\$shareName'
. ' $I_option -U $userName -E -N -d 1'
. ' -c tarmode\\ full -Tx -';
#
# This setting only matters if $Conf{XferMethod} = 'tar'.
#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
$Conf{TarClientCmd} = '$sshPath -q -x -n -l root $host'
. ' env LC_ALL=C $tarPath -c -v -f - -C $shareName+'
. ' --totals';
# $Conf{TarClientRestoreCmd} to undef and the corresponding CGI
# restore option will be removed.
#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
$Conf{TarClientRestoreCmd} = '$sshPath -q -x -l root $host'
. ' env LC_ALL=C $tarPath -x -p --numeric-owner --same-owner'
. ' -v -f - -C $shareName+';
#
# This setting only matters if $Conf{XferMethod} = 'rsync'.
#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
$Conf{RsyncClientRestoreCmd} = '$sshPath -q -x -l root $host $rsyncPath $argList+';
#
#
# This setting only matters if $Conf{XferMethod} = 'backuppcd'.
#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
$Conf{BackupPCdRestoreCmd} = '$bpcdPath TODO';
# $archiveloc The location to put the archive
# $parfile The amount of parity data to create (percentage)
#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
$Conf{ArchiveClientCmd} = '$Installdir/bin/BackupPC_archiveHost'
. ' $tarCreatePath $splitpath $parpath $host $backupnumber'
. ' $compression $compext $splitsize $archiveloc $parfile *';
# This command is only used for DHCP hosts: given an IP address, this
# command should try to find its NetBios name.
#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
$Conf{NmbLookupCmd} = '$nmbLookupPath -A $host';
#
# Experiment manually for your site to see what form of nmblookup command
# works.
#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
$Conf{NmbLookupFindHostCmd} = '$nmbLookupPath $host';
#
# exit status (0 even on failure). Replace with "ping $host 1", which
# gets the correct exit status but we don't get the round-trip time.
#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
$Conf{PingCmd} = '$pingPath -c 1 $host';
#
# $type set to "archive"
# $cmdType set to ArchivePreUserCmd or ArchivePostUserCmd
#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
$Conf{DumpPreUserCmd} = undef;
$Conf{DumpPostUserCmd} = undef;
$Conf{DumpPreShareCmd} = undef;
lname => "Documentation", # actually displays $Lang->{Documentation}
},
{
- link => "http://backuppc.sourceforge.net/faq",
- name => "FAQ", # displays literal "FAQ"
+ link => "http://backuppc.wiki.sourceforge.net",
+ name => "Wiki", # displays literal "Wiki"
},
{
link => "http://backuppc.sourceforge.net",
This page has links to the current releases of BackupPC.
-=item BackupPC FAQ
+=item BackupPC Wiki
-BackupPC has a FAQ at L<http://backuppc.sourceforge.net/faq>.
+BackupPC has a Wiki at L<http://backuppc.wiki.sourceforge.net>.
+Everyone is encouraged to contribute to the Wiki. Anyone with
+a SourceForge account can edit the Wiki.
+
+The old FAQ is at L<http://backuppc.sourceforge.net/faq>, but
+is deprecated in favor of the Wiki.
=item Mailing lists
all of you! Feel free to vote for BackupPC at
L<http://freshmeat.net/projects/backuppc>.
-Also, everyone is encouraged to contribute patches, bug reports, feature
-and design suggestions, new code, FAQs, and documentation corrections or
-improvements. Answering questions on the mailing list is a big help too.
+Also, everyone is encouraged to contribute patches, bug reports,
+feature and design suggestions, new code, Wiki additions (you can
+do those directly) and documentation corrections or improvements.
+Answering questions on the mailing list is a big help too.
=head1 Installing BackupPC
=head2 Fixing installation problems
-Please see the FAQ at L<http://backuppc.sourceforge.net/faq> for
-debugging suggestions.
+Please see the Wiki at L<http://backuppc.wiki.sourceforge.net> for
+debugging suggestions. If you find a solution to your problem that
+could help other users please add it to the Wiki!
=head1 Restore functions
Youlin Feng provided the Chinese translation for 3.1.0.
-Semper provided the Polish translation for 3.1.0.
+Karol 'Semper' Stelmaczonek provided the Polish translation for 3.1.0.
Jeremy Tietsort provided the host summary table sorting feature for 3.1.0.
#
#========================================================================
#
-# Version 3.1.0beta0, released 3 Sep 2007.
+# Version 3.1.0beta1, released 23 Sep 2007.
#
# See http://backuppc.sourceforge.net.
#
SmbClientPath => {type => "execPath", undefIfEmpty => 1},
SmbClientFullCmd => "string",
SmbClientIncrCmd => "string",
- SmbClientRestoreCmd => "string",
+ SmbClientRestoreCmd => {type => "string", undefIfEmpty => 1},
TarShareName => {
type => "list",
TarClientCmd => "string",
TarFullArgs => "string",
TarIncrArgs => "string",
- TarClientRestoreCmd => "string",
+ TarClientRestoreCmd => {type => "string", undefIfEmpty => 1},
TarClientPath => {type => "string", undefIfEmpty => 1},
RsyncShareName => {
RsyncCsumCacheVerifyProb => "float",
RsyncArgs => {
- type => "list",
- emptyOk => 1,
- child => "string",
+ type => "list",
+ emptyOk => 1,
+ child => "string",
},
RsyncRestoreArgs => {
- type => "list",
- emptyOk => 1,
- child => "string",
+ type => "list",
+ emptyOk => 1,
+ undefIfEmpty => 1,
+ child => "string",
},
BackupPCdCmd => "string",
CgiURL => "string",
Language => {
type => "select",
- values => [qw(de en es fr it nl pt_br zh_CN)],
+ values => [qw(de en es fr it nl pl pt_br zh_CN)],
},
CgiUserHomePageCheck => "string",
CgiUserUrlCreate => "string",