use Getopt::Long;
my $opt_svg = $ENV{SVG} || 0;
-my $opt_alt = $ENV{ALT} || 1;
+my $opt_alt = $ENV{ALT} || 0;
+my $opt_invert = $ENV{INVERT} || 0;
+my $opt_vertical = $ENV{VERTICAL} || 0;
+my $opt_zebra = $ENV{ZEBRA} || 0;
+my $opt_lines = $ENV{LINES} || 0;
GetOptions(
'svg!' => \$opt_svg,
'alt!' => \$opt_alt,
+ 'invert!' => \$opt_invert,
+ 'vertical!' => \$opt_vertical,
+ 'zebra!' => \$opt_zebra,
+ 'lines!' => \$opt_lines,
);
# svg font hints
my $font_w = 1.67; # < 2.54, font is not perfect square
+my $font_b = 2.10; # font baseline position
sub slurp {
open(my $fh, '<', shift);
my $include = 0;
while(<DATA>) {
chomp;
- if ( m/^#\s*$model/ ) {
- $include = 1;
+ if ( m/^#\s(.+)/ ) {
+ warn "MODEL [$1] == [$model] ?\n";
+ if ( $model =~ m/$1/ ) {
+ $include = 1;
+ } else {
+ $include = 0;
+ }
} elsif ( m/^#\s+/ ) {
- $include = 0;
+ $include = 1;
} elsif ( $include ) {
- push @{ $pins->{$1} }, $line_i while ( m/\t(P\w\d+)/g );
+ push @{ $pins->{$1} }, $line_i while ( m/\t(\w+\d+)/g );
push @lines, $_;
warn "# pins ",dump($pins);
+my $pin_function;
+my $device;
+
open(my $fh, '<', '/sys/kernel/debug/pinctrl/pinctrl-handles');
while(<$fh>) {
chomp;
- if ( m/group: (P\w\d+)\s.+function: (\S+)/ ) {
- my ($pin, $function) = ($1,$2);
+ if ( m/device: [0-9a-f]+\.(\w+)/ ) {
+ $device = $1;
+ } elsif ( m/group: (\w+\d+)\s.+function: (\S+)/ ) {
+ my ($pin, $function) = ($1,$2);
+ $pin_function->{$pin} = "$device $function";
+
if ( $pins->{$pin} ) {
foreach my $line ( @{$pins->{$pin}} ) {
warn "XXX $pin $line";
my $t = $lines[$line];
- $t =~ s/$pin/$pin [$function]/ || die "can't find $pin in [$t]";
+ if ( $opt_svg ) {
+ $t =~ s/$pin/[$device $function]/;
+ } else {
+ $t =~ s/$pin/$pin [$device $function]/ || die "can't find $pin in [$t]";
+ }
$lines[$line] = $t;
warn "# $line: $lines[$line]\n";
}
warn "IGNORED: pin $pin function $function\n";
}
}
-};
+}
+
+warn "# pin_function = ",dump($pin_function);
my @max_len = ( 0,0,0,0 );
my @line_parts;
push @line_parts, [ $line ] unless $opt_svg;
next;
}
- $line =~ s/\s*\([^\)]+\)//g && warn "NUKED ALT";
+ $line =~ s/(\[(?:uart|serial))([^\t]*\]\s[^\t]*(rx|tx)d?)/$1 $3$2/gi;
+ $line =~ s/(\[i2c)([^\t]*\]\s[^\t]*(scl?k?|sda))/$1 $3$2/gi;
+ $line =~ s/(\[spi)([^\t]*\]\s[^\t]*(miso|mosi|s?clk|c[se]\d*))/$1 $3$2/gi;
+ $line =~ s/\s*\([^\)]+\)//g if ! $opt_alt;
+
+ # shorten duplicate kernel device/function
+ $line =~ s/\[serial (\w+) (uart\d+)\]/[$2 $1]/g;
+ $line =~ s/\[(\w+) (\w+) \1(\d+)\]/[$1$3 $2]/g;
+
my @v = split(/\s*\t+\s*/,$line,4);
push @line_parts, [ @v ];
foreach my $i ( 0 .. 3 ) {
width="210mm">
- <g id="layer1">
-
- <rect y="88.686066" x="30.48" height="2.54" width="73.659996" id="rect4759" style="opacity:1;fill:#0000ff;fill-opacity:1;stroke:none;" />
-
- <rect
- y="43.177692"
- x="30.48"
- height="2.54"
- width="73.659996"
- id="rect4755"
- style="opacity:0.84200003;fill:#123456;fill-opacity:1;stroke:none;stroke-width:0.28884605;stroke-opacity:1" />
-
- <rect x="0" y="0" width="210" height="297" style="fill:#000000" id="high-contrast"/>
+<g id="layer1">
}; # svg, insert rest of rect
+ print qq{<rect x="0" y="0" width="210" height="297" style="fill:#000000" id="high-contrast"/>} if $opt_invert;
}
my @later;
-my @pin_cols = ( '#ffffff', '#000000' );
+my $cols = { # foreground background
+ txt => [ '#000000', '#ffffff' ],
+ pins => [ '#ffffff', '#ff00ff' ],
+ vcc => [ '#ff0000', '#ffff00' ],
+ gnd => [ '#000000', '#00ffff' ],
+ i2c => [ '#008800', '#ffcccc' ],
+ serial=>[ '#000088', '#ccffcc' ],
+ spi => [ '#880000', '#ccccff' ],
+};
+
+sub swap_cols {
+ my $swap = shift;
+ die "$swap not found in ",dump($cols) unless $cols->{$swap};
+ my ( $c1, $c2 ) = @{ $cols->{$swap} };
+ $cols->{$swap} = [ $c2, $c1 ];
+}
+
+swap_cols 'txt' if $opt_invert;
+
sub svg_style {
my ($name,$x,$y,$col) = @_;
- $y -= 2.30; # shift box overlay to right vertical position based on font baseline
+ $y -= $font_b; # shift box overlay to right vertical position based on font baseline
sub rect {
my ($x,$y,$col,$fill) = @_;
- print qq{<rect x="$x" y="$y" height="2.54" width="}, $max_len[$col] * $font_w, qq{" style="opacity:1;fill:$fill;fill-opacity:1;stroke:#ffffff;stroke-width:0.10;stroke-opacity:1" />};
+ print qq{<rect x="$x" y="$y" height="2.54" width="}, $max_len[$col] * $font_w, qq{" style="fill:$fill;stroke:#ffffff;stroke-width:0.10" />\n};
}
- if ( $name =~ m/^\d+$/ ) { # pins
- my ( $c1, $c2 ) = @pin_cols;
- rect $x,$y,$col,$c1;
- return qq{ style="fill:$c2"};
+ if ( $name =~ m/^(\d+)$/ ) { # pins
+ my $pin = $1;
+ my ( $fg, $bg ) = @{ $cols->{pins} };
+ if ( $pin == 1 ) {
+ my $w = $max_len[$col]*$font_w - 0.1;
+ my $cx = $x + $w;
+ my $cy = $y + 2.54;
+ #print qq{<polygon points="$x,$y $cx,$y $x,$cy $x,$y" stroke="$fg" stroke-width="0.25" fill="$bg" />};
+ #print qq{<polygon points="$x,$cy $cx,$cy $cx,$y $x,$cy" stroke="$bg" stroke-width="0.25" fill="$fg" />};
+ print qq{<rect x="$x" y="$y" width="$w" height="2.54" stroke="$fg" stroke-width="0.3" fill="$bg" />};
+ my ( $fg, $bg ) = @{ $cols->{txt} };
+ print qq{<rect x="$x" y="$y" width="$w" height="2.54" rx="1" ry="1" stroke="$fg" stroke-width="0.3" fill="$bg" />};
+ } else {
+ rect $x,$y,$col,$fg;
+ }
+ return qq{ style="fill:$bg"};
}
- if ( $name =~ m/(VCC|3V3)/i ) {
- rect $x,$y,$col,'#000000';
- return qq{ style="fill:#ffcc88"};
- } elsif ( $name =~ m/(G(ND|Round)|VSS)/i ) {
- rect $x,$y,$col,'#000000';
- return qq{ style="fill:#ff8800"};
+ if ( $name =~ m/(VCC|3V3|3.3V|5v)/i ) {
+ my ($fg,$bg) = @{ $cols->{vcc} };
+ rect $x,$y,$col,$bg;
+ return qq{ style="fill:$fg"};
+ } elsif ( $name =~ m/(G(ND|Round)|VSS|0v)/i ) {
+ my ($fg,$bg) = @{ $cols->{gnd} };
+ rect $x,$y,$col,$bg;
+ return qq{ style="fill:$fg"};
+ } elsif ( $name =~ m/\[(\w+)/ ) { # kernel
+ my $dev = $1;
+ my ($fg,$bg) = @{ $cols->{txt} };
+ ($fg,$bg) = @{ $cols->{$dev} } if exists $cols->{$dev};
+ rect $x,$y,$col,$bg;
+ return qq{ style="fill:$fg"};
} else {
+ my ( $fg, $bg ) = @{ $cols->{txt} };
+ rect $x,$y,$col,$bg;
+ #return qq{ style="fill:$fg"};
return '';
}
}
@cols_order = ( 0,1,3,2 ); # pins outside on the right
@cols_align = ( '','-','-','' );
-foreach my $line ( @line_parts ) {
- my $pin_color = $alt_col ? '#cccccc' : '#444444';
- $alt_col = ! $alt_col;
+# cut marks
+my ($fg,$bg) = @{ $cols->{txt} };
+my $line_fmt = qq{<line x1="%s" y1="%s" x2="%s" y2="%s" style="stroke:$fg;stroke-width:0.10;fill:$bg" />\n};
+
+my @cut_marks;
+sub cut_mark {
+ my ($x,$y) = @_;
+ return unless $opt_svg;
+ push @cut_marks, sprintf($line_fmt, $x-5, $y-$font_b, $x+5, $y-$font_b);
+ push @cut_marks, sprintf($line_fmt, $x, $y-$font_b-5, $x, $y-$font_b+5);
+}
+cut_mark $x, $y;
+my $max_x = $x;
+$max_x += $max_len[$_] * $font_w foreach ( 0 .. 3 );
+cut_mark $max_x, $y;
+
+sub line {
+ my ($x,$y,$max_x) = @_;
+ push @cut_marks, sprintf($line_fmt, $x, $y-$font_b, $max_x, $y-$font_b);
+}
+
+
+my $last_cut_mark = 0;
+
+foreach my $i ( 0 .. $#line_parts ) {
+ $i = $#line_parts - $i if $opt_vertical;
+ my $line = $line_parts[$i];
if ( $opt_svg ) {
- my $tspan = qq{<tspan x="$x" y="$y" style="font-size:2.82222223px;line-height:2.53999996px;font-family:'Andale Mono';fill-opacity:1;fill:#ffffff;stroke:none;">};
+ if ( ! exists $line->[0] ) {
+ # before first empty line
+ if ( $last_cut_mark == 0 ) {
+ cut_mark $x, $y;
+ cut_mark $max_x, $y;
+ $last_cut_mark = 1;
+ line $x, $y, $max_x if $opt_lines;
+ $y += 15; # make spacing between pinouts
+ }
+ } elsif ( $last_cut_mark ) {
+ # first full line
+ cut_mark $x, $y;
+ cut_mark $max_x, $y;
+ $last_cut_mark = 0;
+ } else {
+ #warn "CUTMARK no magic";
+ }
+
+ line $x, $y, $max_x if $opt_lines && exists $line->[1];
+
+ my ($fg,$bg) = @{ $cols->{txt} };
+ my $tspan = qq{<tspan x="$x" y="$y" style="line-height:2.54;fill:$fg;stroke:none;">\n};
my $x_pos = $x;
foreach my $i ( @cols_order ) {
next unless $line->[$i];
- $tspan .= qq{<tspan x="$x_pos"}.svg_style($line->[$i],$x_pos,$y,$i).sprintf( '>%' . $cols_align[$i] . $max_len[$i] . 's</tspan>', $line->[$i]);
+ my $text_anchor = 'middle';
+ my $x2 = $x_pos + ( $max_len[$i] * $font_w ) / 2;
+ $tspan .= qq{<tspan x="$x2" text-anchor="$text_anchor"}.svg_style($line->[$i],$x_pos,$y,$i).sprintf( '>%' . $cols_align[$i] . $max_len[$i] . 's</tspan>', $line->[$i]);
$x_pos += $max_len[$i] * $font_w;
}
- $tspan .= qq{</tspan>};
+ $tspan .= qq{</tspan>\n};
push @later,sprintf $tspan, @$line;
$y += 2.54;
- # swap pin colors
- my ( $c1, $c2 ) = @pin_cols;
- @pin_cols = ( $c2, $c1 );
+ # swap pin colors for line stripe
+ if ( $opt_zebra ) {
+ swap_cols $_ foreach qw( pins txt );
+ }
} else {
id="text4506"
y="$x"
x="$y"
- style="font-size:2.82222223px;line-height:2.53999996px;font-family:'Andale Mono';fill-opacity:1;stroke:none;stroke-width:0.26458332px;stroke-opacity:1"
+ style="font-size:2.34px;line-height:2.54px;font-family:'Andale Mono';stroke:none"
xml:space="preserve">
}; #svg
- print @later, qq{
-</text>
-</g>
-</svg>
- }; #svg
+ print @later, qq{</text>\n}, @cut_marks, qq{</g>\n</svg>};
}
6 PI20 UART7_TX 5 PH3
4 PI21 UART7_RX 3 PH5
2 3V3 1 SATA-5V
+
+# Raspberry Pi 3 Model B Rev 1.2
+1 3.3v 2 5v
+3 gpio2 (SDA.1) 4 5v
+5 gpio3 (SCL.1) 6 0v
+7 gpio4 (GPIO. 7) 8 gpio14 (TxD)
+9 0v 10 gpio15 (RxD)
+11 gpio17 (GPIO. 0) 12 gpio18 (GPIO. 1)
+13 gpio27 (GPIO. 2) 14 0v
+15 gpio22 (GPIO. 3) 16 gpio23 (GPIO. 4)
+17 3.3v 18 gpio24 (GPIO. 5)
+19 gpio10 (MOSI) 20 0v
+21 gpio9 (MISO) 22 gpio25 (GPIO. 6)
+23 gpio11 (SCLK) 24 gpio8 (CE0)
+25 0v 26 gpio7 (CE1)
+27 gpio0 (SDA.0) 28 gpio1 (SCL.0)
+29 gpio5 (GPIO.21) 30 0v
+31 gpio6 (GPIO.22) 32 gpio12 (GPIO.26)
+33 gpio13 (GPIO.23) 34 0v
+35 gpio19 (GPIO.24) 36 gpio16 (GPIO.27)
+37 gpio26 (GPIO.25) 38 gpio20 (GPIO.28)
+39 0v 40 gpio21 (GPIO.29)